Tyrant Cnc144600223
Tyrant Cnc Tdp365Triggoldblack Intellifire Gold/Black Fits Sig P365$85.46
Availability: In Stock
The Tyrant CNC IntelliFire trigger system for the SIG P365 brings factory-grade safety engineering and precision shooting control to one of America's most popular carry pistols. This patent-pending dual safety blade trigger is purpose-built for the compact P365 platform, addressing a real gap in the original design: the lack of a traditional trigger safety. If you carry a P365 daily—whether appendix, IWB, or pocket—this drop-in replacement gives you measurable improvements in both safety and shot control without changing the gun's ergonomics or profile.
The engineering here is genuinely thoughtful. Tyrant CNC designed a dual safety blade system that works around the P365's tight grip module clearance using a 3:1 lever ratio. Press the front blade normally and it clears; leave it alone and the rear blade directly blocks the firing pin from dropping. The trigger itself is milled from stainless steel with lightweight 6061 aluminum safety blades, and the internal spring is heat-treated for long-term reliability. You get a clean 90-degree break and 30% less pre-travel than stock—the maximum reduction possible without disengaging SIG's internal safety—which means faster, more consistent follow-up shots without gambling on reliability.
Installation is straightforward: it's a drop-in replacement for standard P365 variants. The flat-face trigger with a subtle bottom curve follows Tyrant's hybrid ergonomics philosophy, giving you a surface that feels natural for both precision and speed. Whether you're a concealed carry pro or someone who takes safety seriously, this is a no-compromise upgrade for the platform.
| Platform | SIG Sauer |
| Designed For | P365 |
| Fitment | Drop-in replacement for standard P365 variants |
| Trigger Body Material | Stainless steel |
| Safety Blade Material | 6061 aluminum (lightweight) |
| Internal Spring | Stainless steel, heat-treated |
| Trigger Break Angle | 90 degrees |
| Pre-Travel Reduction | 30% less than factory |
| Trigger Face | Flat with subtle bottom curve |
| Safety Feature | Dual safety blade system (patent-pending) |
Yes, it's a drop-in replacement for standard SIG SAUER P365 variants. Note: it may not be compatible with California-compliant P365 models equipped with a manual magazine disconnect feature. It works with both OEM and aftermarket grip modules.
Yes, this trigger is compatible with aftermarket P365 grip modules, though the dual safety blade system was specifically engineered around the tight clearances of SIG's standard grip module.
The P365's narrow grip module clearance made a traditional single safety blade impossible. Tyrant CNC's dual blade design uses a 3:1 lever ratio so the front blade clears when pressed normally, but if undepressed, the rear blade directly contacts the grip module and blocks the firing pin from dropping—adding an extra layer of safety specific to this platform.
The IntelliFire system reduces trigger pre-travel by 30% compared to factory, which is the maximum reduction possible without disengaging SIG's internal safety mechanisms. This means faster trigger reset and more consistent shot placement.
SKU: 144597715 • Width: 3.9in • Height: 0.9in • Depth: 4.4in • Weight: 0.045oz
Availability: In Stock
The Tyrant CNC IntelliFire trigger system for the SIG P365 brings factory-grade safety engineering and precision shooting control to one of America's most popular carry pistols. This patent-pending dual safety blade trigger is purpose-built for the compact P365 platform, addressing a real gap in the original design: the lack of a traditional trigger safety. If you carry a P365 daily—whether appendix, IWB, or pocket—this drop-in replacement gives you measurable improvements in both safety and shot control without changing the gun's ergonomics or profile.
The engineering here is genuinely thoughtful. Tyrant CNC designed a dual safety blade system that works around the P365's tight grip module clearance using a 3:1 lever ratio. Press the front blade normally and it clears; leave it alone and the rear blade directly blocks the firing pin from dropping. The trigger itself is milled from stainless steel with lightweight 6061 aluminum safety blades, and the internal spring is heat-treated for long-term reliability. You get a clean 90-degree break and 30% less pre-travel than stock—the maximum reduction possible without disengaging SIG's internal safety—which means faster, more consistent follow-up shots without gambling on reliability.
Installation is straightforward: it's a drop-in replacement for standard P365 variants. The flat-face trigger with a subtle bottom curve follows Tyrant's hybrid ergonomics philosophy, giving you a surface that feels natural for both precision and speed. Whether you're a concealed carry pro or someone who takes safety seriously, this is a no-compromise upgrade for the platform.
| Platform | SIG Sauer |
| Designed For | P365 |
| Fitment | Drop-in replacement for standard P365 variants |
| Trigger Body Material | Stainless steel |
| Safety Blade Material | 6061 aluminum (lightweight) |
| Internal Spring | Stainless steel, heat-treated |
| Trigger Break Angle | 90 degrees |
| Pre-Travel Reduction | 30% less than factory |
| Trigger Face | Flat with subtle bottom curve |
| Safety Feature | Dual safety blade system (patent-pending) |
Yes, it's a drop-in replacement for standard SIG SAUER P365 variants. Note: it may not be compatible with California-compliant P365 models equipped with a manual magazine disconnect feature. It works with both OEM and aftermarket grip modules.
Yes, this trigger is compatible with aftermarket P365 grip modules, though the dual safety blade system was specifically engineered around the tight clearances of SIG's standard grip module.
The P365's narrow grip module clearance made a traditional single safety blade impossible. Tyrant CNC's dual blade design uses a 3:1 lever ratio so the front blade clears when pressed normally, but if undepressed, the rear blade directly contacts the grip module and blocks the firing pin from dropping—adding an extra layer of safety specific to this platform.
The IntelliFire system reduces trigger pre-travel by 30% compared to factory, which is the maximum reduction possible without disengaging SIG's internal safety mechanisms. This means faster trigger reset and more consistent shot placement.
SKU: 144597715 • Width: 3.9in • Height: 0.9in • Depth: 4.4in • Weight: 0.045oz