Tyrant Cnc144597715
Tyrant Cnc Tdp365Triggoldgold Intellifire Gold/Gold Sig P365$85.46
Availability: In Stock
The Tyrant CNC IntelliFire Trigger for SIG SAUER P365 is a purpose-built aftermarket trigger system designed to address the concealed-carry favorite's lack of a traditional trigger safety. If you carry a P365 daily—whether appendix, IWB, or pocket—this drop-in replacement adds a patent-pending dual safety blade system without sacrificing the speed and consistency you need when it matters. It's engineered for shooters who want enhanced safety features and a refined trigger break without custom gunsmithing.
The dual safety blade design solves a real problem: the P365's tight grip module leaves no room for conventional external safeties. Tyrant CNC's solution uses a 3:1 lever ratio so the front blade clears the grip when you intentionally depress it, while the rear blade contacts the grip module if left untouched, blocking the firing pin. It's an elegant fix that adds a manual safety layer to a gun built without one.
Mechanically, you're looking at a 90-degree break for consistent shot placement on both the first and follow-up rounds, paired with a 30% reduction in pre-travel—as much as the P365's internal safety allows without compromise. The hybrid ergonomics blend a flat face with a subtle bottom curve, designed to suit both deliberate aim and defensive draws. Materials matter: stainless steel trigger body, aluminum safety blades, and a heat-treated internal spring built to outlast the gun's service life.
Installation is straightforward—it's a drop-in replacement for standard P365 variants. Note the California compliance caveat: models with a manual magazine disconnect may not be fully compatible. If your P365 is your daily carry and you've wished for one more layer of safety without adding bulk, this is the upgrade worth considering.
| Platform | SIG SAUER |
| Designed For | P365 |
| Trigger Break Angle | 90 degrees |
| Pre-Travel Reduction | 30% less than OEM |
| Trigger Body Material | Stainless steel |
| Safety Blade Material | Aluminum (blue blades) |
| Internal Spring | Heat-treated stainless steel |
| Installation | Drop-in replacement |
Yes, the IntelliFire trigger is compatible with aftermarket grip modules. However, it may not work with California-compliant P365 models that have a manual magazine disconnect feature installed.
It's a drop-in replacement, meaning no gunsmithing or specialized tools are required for installation.
The IntelliFire adds a patent-pending dual safety blade system—the first trigger safety option available for the P365. It also delivers 30% less pre-travel than the OEM trigger and a crisp 90-degree break angle for consistent shot placement. The dual blade design works within the P365's tight grip profile, something traditional external safeties cannot do.
It works with standard SIG SAUER P365 variants as a drop-in replacement. The notable exception is California-compliant P365 models equipped with a manual magazine disconnect feature, which may not be fully compatible.
SKU: 194196830 • Weight: 0.02oz
Availability: In Stock
The Tyrant CNC IntelliFire Trigger for SIG SAUER P365 is a purpose-built aftermarket trigger system designed to address the concealed-carry favorite's lack of a traditional trigger safety. If you carry a P365 daily—whether appendix, IWB, or pocket—this drop-in replacement adds a patent-pending dual safety blade system without sacrificing the speed and consistency you need when it matters. It's engineered for shooters who want enhanced safety features and a refined trigger break without custom gunsmithing.
The dual safety blade design solves a real problem: the P365's tight grip module leaves no room for conventional external safeties. Tyrant CNC's solution uses a 3:1 lever ratio so the front blade clears the grip when you intentionally depress it, while the rear blade contacts the grip module if left untouched, blocking the firing pin. It's an elegant fix that adds a manual safety layer to a gun built without one.
Mechanically, you're looking at a 90-degree break for consistent shot placement on both the first and follow-up rounds, paired with a 30% reduction in pre-travel—as much as the P365's internal safety allows without compromise. The hybrid ergonomics blend a flat face with a subtle bottom curve, designed to suit both deliberate aim and defensive draws. Materials matter: stainless steel trigger body, aluminum safety blades, and a heat-treated internal spring built to outlast the gun's service life.
Installation is straightforward—it's a drop-in replacement for standard P365 variants. Note the California compliance caveat: models with a manual magazine disconnect may not be fully compatible. If your P365 is your daily carry and you've wished for one more layer of safety without adding bulk, this is the upgrade worth considering.
| Platform | SIG SAUER |
| Designed For | P365 |
| Trigger Break Angle | 90 degrees |
| Pre-Travel Reduction | 30% less than OEM |
| Trigger Body Material | Stainless steel |
| Safety Blade Material | Aluminum (blue blades) |
| Internal Spring | Heat-treated stainless steel |
| Installation | Drop-in replacement |
Yes, the IntelliFire trigger is compatible with aftermarket grip modules. However, it may not work with California-compliant P365 models that have a manual magazine disconnect feature installed.
It's a drop-in replacement, meaning no gunsmithing or specialized tools are required for installation.
The IntelliFire adds a patent-pending dual safety blade system—the first trigger safety option available for the P365. It also delivers 30% less pre-travel than the OEM trigger and a crisp 90-degree break angle for consistent shot placement. The dual blade design works within the P365's tight grip profile, something traditional external safeties cannot do.
It works with standard SIG SAUER P365 variants as a drop-in replacement. The notable exception is California-compliant P365 models equipped with a manual magazine disconnect feature, which may not be fully compatible.
SKU: 194196830 • Weight: 0.02oz