Tyrant Cnc144600220
Tyrant Cnc Tdp365Trigblackblack Intellifire Black/Black Fits Sig P365$85.46
Availability: In Stock
The Tyrant CNC IntelliFire trigger system for the SIG SAUER P365 brings factory-grade engineering and a first-of-its-kind safety feature to one of the most popular compact carry guns on the market. If you're running a P365 for concealed carry—whether appendix, IWB, or off-body—you know the gun is a tack driver out of the box. This trigger system elevates that platform with a cleaner break, reduced pre-travel, and a patent-pending dual safety blade system that adds a layer of protection the P365 didn't originally have.
The core innovation here is the dual safety blade design. The P365's tight grip module doesn't leave room for traditional trigger safety blades, so Tyrant CNC engineered a 3:1 lever ratio that lets the front blade clear the grip when you press it, while the rear blade stays engaged—blocking the firing pin if the trigger itself is pressed without both safety blades being deliberately squeezed. It's the first trigger safety ever made for the P365, and it's patent-pending technology you won't find anywhere else.
Functionally, you get a 30% reduction in pre-travel and take-up compared to stock, with a crisp 90-degree break that'll tighten your shot groups on both first and follow-up shots. The trigger wears a stainless steel body with lightweight 6061 aluminum safety blades and a heat-treated internal spring—built tough enough to outlast the gun. The flat-faced design with a subtle bottom curve fits the Tyrant hybrid ergonomic philosophy: responsive, controllable, and natural under the finger. Installation is straightforward—it's a drop-in fit for standard P365 variants, though it may not work with California-compliant models featuring a manual magazine disconnect.
Whether you carry daily or hit the range, the IntelliFire system transforms your P365 into a more refined, safer platform without sacrificing the compact form factor that made you choose it in the first place.
| Brand | Tyrant CNC |
| Platform | SIG SAUER P365 |
| Type | Trigger Safety System |
| Trigger Body Material | Stainless Steel |
| Safety Blade Material | 6061 Aluminum |
| Internal Spring | Stainless Steel, Heat-Treated |
| Break Angle | 90 Degrees |
| Pre-Travel Reduction | 30% Less Than Stock |
| Installation | Drop-in Replacement |
| Compatibility | Standard SIG P365 variants and most aftermarket grip modules; may not be compatible with California-compliant P365 models with manual magazine disconnect |
Yes, the IntelliFire is designed to work with most aftermarket grip modules. However, compatibility with California-compliant P365 models that include a manual magazine disconnect feature is not guaranteed—contact the manufacturer if you're unsure about your specific setup.
It's a drop-in replacement, meaning no gunsmithing or special tools are required for installation on compatible P365 models.
The P365's narrow grip module wouldn't accommodate a traditional trigger safety blade. Tyrant CNC engineered a dual-blade design with a 3:1 lever ratio: the front blade clears the grip when you actively squeeze it, while the rear blade engages independently to block the firing pin if only the trigger is pressed. It's the first trigger safety ever offered for the P365.
The IntelliFire reduces pre-travel by 30% compared to the stock P365 trigger—the maximum reduction possible while maintaining SIG's internal safety mechanisms.
SKU: 167512894 • Width: 3.9in • Height: 0.8in • Depth: 4.5in • Weight: 0.035oz
Availability: In Stock
The Tyrant CNC IntelliFire trigger system for the SIG SAUER P365 brings factory-grade engineering and a first-of-its-kind safety feature to one of the most popular compact carry guns on the market. If you're running a P365 for concealed carry—whether appendix, IWB, or off-body—you know the gun is a tack driver out of the box. This trigger system elevates that platform with a cleaner break, reduced pre-travel, and a patent-pending dual safety blade system that adds a layer of protection the P365 didn't originally have.
The core innovation here is the dual safety blade design. The P365's tight grip module doesn't leave room for traditional trigger safety blades, so Tyrant CNC engineered a 3:1 lever ratio that lets the front blade clear the grip when you press it, while the rear blade stays engaged—blocking the firing pin if the trigger itself is pressed without both safety blades being deliberately squeezed. It's the first trigger safety ever made for the P365, and it's patent-pending technology you won't find anywhere else.
Functionally, you get a 30% reduction in pre-travel and take-up compared to stock, with a crisp 90-degree break that'll tighten your shot groups on both first and follow-up shots. The trigger wears a stainless steel body with lightweight 6061 aluminum safety blades and a heat-treated internal spring—built tough enough to outlast the gun. The flat-faced design with a subtle bottom curve fits the Tyrant hybrid ergonomic philosophy: responsive, controllable, and natural under the finger. Installation is straightforward—it's a drop-in fit for standard P365 variants, though it may not work with California-compliant models featuring a manual magazine disconnect.
Whether you carry daily or hit the range, the IntelliFire system transforms your P365 into a more refined, safer platform without sacrificing the compact form factor that made you choose it in the first place.
| Brand | Tyrant CNC |
| Platform | SIG SAUER P365 |
| Type | Trigger Safety System |
| Trigger Body Material | Stainless Steel |
| Safety Blade Material | 6061 Aluminum |
| Internal Spring | Stainless Steel, Heat-Treated |
| Break Angle | 90 Degrees |
| Pre-Travel Reduction | 30% Less Than Stock |
| Installation | Drop-in Replacement |
| Compatibility | Standard SIG P365 variants and most aftermarket grip modules; may not be compatible with California-compliant P365 models with manual magazine disconnect |
Yes, the IntelliFire is designed to work with most aftermarket grip modules. However, compatibility with California-compliant P365 models that include a manual magazine disconnect feature is not guaranteed—contact the manufacturer if you're unsure about your specific setup.
It's a drop-in replacement, meaning no gunsmithing or special tools are required for installation on compatible P365 models.
The P365's narrow grip module wouldn't accommodate a traditional trigger safety blade. Tyrant CNC engineered a dual-blade design with a 3:1 lever ratio: the front blade clears the grip when you actively squeeze it, while the rear blade engages independently to block the firing pin if only the trigger is pressed. It's the first trigger safety ever offered for the P365.
The IntelliFire reduces pre-travel by 30% compared to the stock P365 trigger—the maximum reduction possible while maintaining SIG's internal safety mechanisms.
SKU: 167512894 • Width: 3.9in • Height: 0.8in • Depth: 4.5in • Weight: 0.035oz