Tyrant Cnc144600229
Tyrant Cnc Intellifire Tdp365Trigblackgold Sig P365 Intlfire Trgr$85.46
Availability: In Stock
The Tyrant CNC IntelliFire trigger system for SIG P365 addresses one of the most common complaints about this popular concealed carry pistol: the lack of a trigger safety. Using patent-pending dual safety blade geometry, this drop-in replacement trigger combines enhanced safety features with the crisp, predictable break that serious shooters demand. If you carry a P365 daily or compete with one, this is a purpose-built upgrade that genuinely improves both handling and peace of mind.
What sets the IntelliFire apart is how it solves the P365's physical constraints. The grip module leaves almost no room for a conventional safety blade, so Tyrant CNC engineered a clever 3:1 lever ratio that lets the front blade fold away when you grip the pistol naturally, while the rear blade stays positioned to block the firing pin if the trigger is pressed without a full grip. It's smart engineering born from understanding the real gun, not just copying designs from larger platforms.
The trigger itself delivers a clean 90-degree break with 30% less pre-travel than stock—the maximum reduction possible without interfering with SIG's internal safety mechanisms. The flat-faced design with a subtle curve underneath fits naturally in your hand and promotes repeatable shot placement on both initial and follow-up rounds. Built from 12L14 steel with aluminum safety blades and stainless steel internals, it's engineered to handle the daily wear of appendix carry or regular range use.
This is a drop-in replacement compatible with standard P365 variants and most aftermarket grip modules. Installation requires no gunsmithing, and the result is a measurably better trigger without sacrificing the reliability SIG owners expect.
| Platform | SIG SAUER |
| Designed For | P365 |
| Type | Drop-in Replacement Trigger |
| Safety System | Dual Safety Blade (Patent-Pending) |
| Trigger Break Angle | 90 Degrees |
| Pre-Travel Reduction | 30% vs. OEM |
| Trigger Body Material | Stainless Steel |
| Safety Blades | Aluminum (6061) |
| Internal Spring | Stainless Steel, Heat-Treated |
| Face Profile | Flat with Subtle Bottom Curve |
Yes. This is a drop-in replacement designed to install without modification. It is compatible with standard SIG SAUER P365 variants and most aftermarket grip modules. Note: it may not be compatible with California-compliant P365 models that have a manual magazine disconnect feature installed.
The P365 grip module provides very limited clearance, which makes traditional safety blade designs impossible to fit. The IntelliFire uses a patented 3:1 lever ratio that allows the front safety blade to fold away when you grip the pistol normally. The rear blade remains positioned to block the firing pin if the trigger is pressed without a proper grip, adding a layer of safety the stock P365 trigger lacks.
The IntelliFire delivers 30% less pre-travel, a clean 90-degree break for more consistent shot placement, and—most significantly—a trigger safety system. The stock P365 has no trigger safety at all, which concerns many concealed carry users. This upgrade was engineered specifically to address that gap while maintaining compatibility with SIG's internal safety features.
Yes. The dual safety blade system is designed to provide additional protection during appendix carry and other retention methods where trigger exposure is a concern. The rear blade acts as a secondary block if the trigger is inadvertently pressed while holstered or handled.
SKU: 152743276 • Width: 4in • Height: 0.75in • Depth: 4.75in • Weight: 0.06oz
Availability: In Stock
The Tyrant CNC IntelliFire trigger system for SIG P365 addresses one of the most common complaints about this popular concealed carry pistol: the lack of a trigger safety. Using patent-pending dual safety blade geometry, this drop-in replacement trigger combines enhanced safety features with the crisp, predictable break that serious shooters demand. If you carry a P365 daily or compete with one, this is a purpose-built upgrade that genuinely improves both handling and peace of mind.
What sets the IntelliFire apart is how it solves the P365's physical constraints. The grip module leaves almost no room for a conventional safety blade, so Tyrant CNC engineered a clever 3:1 lever ratio that lets the front blade fold away when you grip the pistol naturally, while the rear blade stays positioned to block the firing pin if the trigger is pressed without a full grip. It's smart engineering born from understanding the real gun, not just copying designs from larger platforms.
The trigger itself delivers a clean 90-degree break with 30% less pre-travel than stock—the maximum reduction possible without interfering with SIG's internal safety mechanisms. The flat-faced design with a subtle curve underneath fits naturally in your hand and promotes repeatable shot placement on both initial and follow-up rounds. Built from 12L14 steel with aluminum safety blades and stainless steel internals, it's engineered to handle the daily wear of appendix carry or regular range use.
This is a drop-in replacement compatible with standard P365 variants and most aftermarket grip modules. Installation requires no gunsmithing, and the result is a measurably better trigger without sacrificing the reliability SIG owners expect.
| Platform | SIG SAUER |
| Designed For | P365 |
| Type | Drop-in Replacement Trigger |
| Safety System | Dual Safety Blade (Patent-Pending) |
| Trigger Break Angle | 90 Degrees |
| Pre-Travel Reduction | 30% vs. OEM |
| Trigger Body Material | Stainless Steel |
| Safety Blades | Aluminum (6061) |
| Internal Spring | Stainless Steel, Heat-Treated |
| Face Profile | Flat with Subtle Bottom Curve |
Yes. This is a drop-in replacement designed to install without modification. It is compatible with standard SIG SAUER P365 variants and most aftermarket grip modules. Note: it may not be compatible with California-compliant P365 models that have a manual magazine disconnect feature installed.
The P365 grip module provides very limited clearance, which makes traditional safety blade designs impossible to fit. The IntelliFire uses a patented 3:1 lever ratio that allows the front safety blade to fold away when you grip the pistol normally. The rear blade remains positioned to block the firing pin if the trigger is pressed without a proper grip, adding a layer of safety the stock P365 trigger lacks.
The IntelliFire delivers 30% less pre-travel, a clean 90-degree break for more consistent shot placement, and—most significantly—a trigger safety system. The stock P365 has no trigger safety at all, which concerns many concealed carry users. This upgrade was engineered specifically to address that gap while maintaining compatibility with SIG's internal safety features.
Yes. The dual safety blade system is designed to provide additional protection during appendix carry and other retention methods where trigger exposure is a concern. The rear blade acts as a secondary block if the trigger is inadvertently pressed while holstered or handled.
SKU: 152743276 • Width: 4in • Height: 0.75in • Depth: 4.75in • Weight: 0.06oz