Tyrant Cnc152743276
Tyrant Cnc Intellifire Tdp365Trigblackred Sig P365 Intlfire Trgr$85.46
Availability: In Stock
The Tyrant CNC P365 Safety Selector is a precision-engineered upgrade for shooters who want to replace the factory safety lever on their Sig Sauer P365. If you've run into the quirks or limitations of the OEM safety—or if you're adding a manual safety to an FCU that didn't come with one—this complete kit gives you a more controllable, durable alternative built from 17-4 heat-treated stainless steel with a rugged PVD finish.
What sets this safety lever apart is the attention to ergonomic detail. The extended arms stretch 2mm beyond the factory design, giving your thumb better purchase and engagement in high-stress moments. Grooved serrations across the surface lock in your grip whether you're shooting bare-handed, gloved, or in wet conditions—there's no slipping. The heat-treated stainless construction resists corrosion and wear through years of defensive carry or range repetitions, while the PVD coating adds another layer of protection against environmental degradation.
The kit arrives complete: safety lever, stainless steel plunger, and spring. Everything you need is included, so there's no hunting for compatible parts or second-guessing fitment. Installation is straightforward on any P365, P365X, P365XL, P365 Macro, or compatible Tyrant CNC grip module chambered in 9mm or .380 Auto. If your P365 FCU came without a manual safety but has the space for one, this kit lets you add that feature without a gunsmith visit.
This is the kind of upgrade that matters in everyday carry or competition shooting—a small refinement that improves control, durability, and confidence when you need it.
| Material | 17-4 Heat-Treated Stainless Steel |
| Finish | PVD Coating |
| Arm Extension vs. OEM | 2mm longer |
| Surface Texture | Grooved Serrations |
| Compatibility | Sig Sauer P365, P365X, P365XL, P365 Macro; Tyrant CNC P365 grip modules |
| Calibers | 9mm, .380 Auto |
| Kit Contents | Safety lever, stainless steel plunger, spring |
The Tyrant CNC safety selector is compatible with the Sig Sauer P365, P365X, P365XL, P365 Macro, and Tyrant CNC P365 grip modules. It works with both 9mm and .380 Auto versions of these platforms.
This is a drop-in upgrade that requires no gunsmithing. The kit comes complete with the safety lever, stainless steel plunger, and spring—all the parts you need for installation are included.
Yes. Every P365 FCU from Sig Sauer has the space and provisions for a manual safety selector, even if your specific firearm wasn't sold with one. This kit allows you to add that feature to any compatible P365 FCU.
The 2mm extension on the arm creates a larger, more responsive surface for thumb engagement. Combined with the grooved serrations, this gives you better control and a more positive grip in all conditions—bare hand, gloved, or wet—especially important in high-stress situations where every millisecond matters.
SKU: 152743459 • Width: 3.75in • Height: 1in • Depth: 4.25in • Weight: 0.06oz
Availability: In Stock
The Tyrant CNC P365 Safety Selector is a precision-engineered upgrade for shooters who want to replace the factory safety lever on their Sig Sauer P365. If you've run into the quirks or limitations of the OEM safety—or if you're adding a manual safety to an FCU that didn't come with one—this complete kit gives you a more controllable, durable alternative built from 17-4 heat-treated stainless steel with a rugged PVD finish.
What sets this safety lever apart is the attention to ergonomic detail. The extended arms stretch 2mm beyond the factory design, giving your thumb better purchase and engagement in high-stress moments. Grooved serrations across the surface lock in your grip whether you're shooting bare-handed, gloved, or in wet conditions—there's no slipping. The heat-treated stainless construction resists corrosion and wear through years of defensive carry or range repetitions, while the PVD coating adds another layer of protection against environmental degradation.
The kit arrives complete: safety lever, stainless steel plunger, and spring. Everything you need is included, so there's no hunting for compatible parts or second-guessing fitment. Installation is straightforward on any P365, P365X, P365XL, P365 Macro, or compatible Tyrant CNC grip module chambered in 9mm or .380 Auto. If your P365 FCU came without a manual safety but has the space for one, this kit lets you add that feature without a gunsmith visit.
This is the kind of upgrade that matters in everyday carry or competition shooting—a small refinement that improves control, durability, and confidence when you need it.
| Material | 17-4 Heat-Treated Stainless Steel |
| Finish | PVD Coating |
| Arm Extension vs. OEM | 2mm longer |
| Surface Texture | Grooved Serrations |
| Compatibility | Sig Sauer P365, P365X, P365XL, P365 Macro; Tyrant CNC P365 grip modules |
| Calibers | 9mm, .380 Auto |
| Kit Contents | Safety lever, stainless steel plunger, spring |
The Tyrant CNC safety selector is compatible with the Sig Sauer P365, P365X, P365XL, P365 Macro, and Tyrant CNC P365 grip modules. It works with both 9mm and .380 Auto versions of these platforms.
This is a drop-in upgrade that requires no gunsmithing. The kit comes complete with the safety lever, stainless steel plunger, and spring—all the parts you need for installation are included.
Yes. Every P365 FCU from Sig Sauer has the space and provisions for a manual safety selector, even if your specific firearm wasn't sold with one. This kit allows you to add that feature to any compatible P365 FCU.
The 2mm extension on the arm creates a larger, more responsive surface for thumb engagement. Combined with the grooved serrations, this gives you better control and a more positive grip in all conditions—bare hand, gloved, or wet—especially important in high-stress situations where every millisecond matters.
SKU: 152743459 • Width: 3.75in • Height: 1in • Depth: 4.25in • Weight: 0.06oz