Availability: In Stock
The RCBS Pow'r Pull Impact Bullet Puller Chuck Assembly is a kinetic-style bullet puller built to save time when reloading mistakes happen. Unlike press-mounted pullers that require bench setup, this impact puller uses a simple striking motion to separate bullets from loaded rounds—no disassembly of your press needed. If you're hand-loading rifle or handgun ammunition and need a fast, portable way to salvage brass and components from bad rounds, this tool handles the job without fuss.
The puller's one-piece body is engineered for durability through repeated use, and the ergonomic handle makes the striking action comfortable during extended sessions. Three interchangeable case-holding chucks come with the assembly, giving you the range needed for centerfire rifle and handgun work across most common calibers. Cases from .22 Hornet and 5.7x28mm on the small end up through the magnum families (WSM, RUM) are accommodated by the chuck set—meaning you can keep one puller station ready for whatever cartridge you're working with that day.
This is a dedicated centerfire tool; rimfire cartridges are not supported due to rim geometry differences. For reloaders who want a reliable, non-powered way to reverse a loading mistake without breaking down the press or reaching for a specialized bench tool, the Pow'r Pull delivers straightforward functionality at a reasonable investment.
| Brand | RCBS |
| Type | Kinetic impact bullet puller |
| Configuration | Standalone (non-press-mounted) |
| Chucks Included | Three interchangeable |
| Cartridge Range | .22 Hornet through WSM/RUM family |
| Compatible Cartridge Types | Centerfire only |
| Body Style | One-piece construction |
The three included chucks accommodate centerfire cases from .22 Hornet and 5.7x28mm up through the WSM (Winchester Short Magnum) and RUM (Remington Ultra Magnum) families. Rimfire cartridges are not supported.
No. The RCBS Pow'r Pull is a standalone, handheld impact puller. You hold it, position the loaded round in the chuck, and strike it against a solid surface to release the bullet. This makes it portable and useful when your press is occupied with another task.
The kit includes the one-piece puller body with ergonomic handle and three interchangeable case-holding chucks to cover the range of supported cartridge sizes.
Yes, as long as they are centerfire cartridges within the .22 Hornet to WSM/RUM range. The three included chucks provide the size coverage needed for both common handgun and rifle calibers in that spectrum.
SKU: 115817842 • Weight: 1.3oz
Availability: In Stock
The RCBS Pow'r Pull Impact Bullet Puller Chuck Assembly is a kinetic-style bullet puller built to save time when reloading mistakes happen. Unlike press-mounted pullers that require bench setup, this impact puller uses a simple striking motion to separate bullets from loaded rounds—no disassembly of your press needed. If you're hand-loading rifle or handgun ammunition and need a fast, portable way to salvage brass and components from bad rounds, this tool handles the job without fuss.
The puller's one-piece body is engineered for durability through repeated use, and the ergonomic handle makes the striking action comfortable during extended sessions. Three interchangeable case-holding chucks come with the assembly, giving you the range needed for centerfire rifle and handgun work across most common calibers. Cases from .22 Hornet and 5.7x28mm on the small end up through the magnum families (WSM, RUM) are accommodated by the chuck set—meaning you can keep one puller station ready for whatever cartridge you're working with that day.
This is a dedicated centerfire tool; rimfire cartridges are not supported due to rim geometry differences. For reloaders who want a reliable, non-powered way to reverse a loading mistake without breaking down the press or reaching for a specialized bench tool, the Pow'r Pull delivers straightforward functionality at a reasonable investment.
| Brand | RCBS |
| Type | Kinetic impact bullet puller |
| Configuration | Standalone (non-press-mounted) |
| Chucks Included | Three interchangeable |
| Cartridge Range | .22 Hornet through WSM/RUM family |
| Compatible Cartridge Types | Centerfire only |
| Body Style | One-piece construction |
The three included chucks accommodate centerfire cases from .22 Hornet and 5.7x28mm up through the WSM (Winchester Short Magnum) and RUM (Remington Ultra Magnum) families. Rimfire cartridges are not supported.
No. The RCBS Pow'r Pull is a standalone, handheld impact puller. You hold it, position the loaded round in the chuck, and strike it against a solid surface to release the bullet. This makes it portable and useful when your press is occupied with another task.
The kit includes the one-piece puller body with ergonomic handle and three interchangeable case-holding chucks to cover the range of supported cartridge sizes.
Yes, as long as they are centerfire cartridges within the .22 Hornet to WSM/RUM range. The three included chucks provide the size coverage needed for both common handgun and rifle calibers in that spectrum.
SKU: 115817842 • Weight: 1.3oz