$16.43
Availability: In Stock
The RCBS .338 Caliber Bullet Puller Collet is a precision reloading tool designed specifically for reloaders who need to safely extract jacketed bullets from fired brass cases without damage. This collet-style puller threads into any single-stage reloading press equipped with standard 7/8-inch-14 threads—which covers the vast majority of presses on the market—making it a practical solution for anyone working up loads, managing rejects, or salvaging components during development.
Bullet pulling is a regular part of handloading, whether you're recovering quality brass from a failed load, adjusting bullet seating, or pulling bullets from cases that didn't perform as expected. The RCBS design pulls the bullet cleanly without marring your cases or the bullet itself—critical when you want to reuse expensive components. Setup is straightforward: install the caliber-specific collet, seat your cartridge in the press, tighten the collet around the bullet, and work the ram to extract it.
This .338 collet is a replacement component, so compatibility with your existing RCBS press setup depends on your current puller assembly and press thread configuration. Before ordering, confirm your press has the standard 7/8-14 thread pattern and verify that the collet size matches your .338 caliber needs. For reloaders building or maintaining a .338 cartridge setup, having the right puller tool on hand keeps component recovery efficient and your workflow moving.
| Caliber | .338 |
| Thread Pattern | 7/8-inch-14 |
| Type | Collet |
| Compatible Press Style | Single-stage press with standard threads |
Yes, if your single-stage reloading press has the standard 7/8-inch-14 thread pattern. RCBS designed this collet to fit most common press configurations, but it's worth verifying your press threading before ordering. If you're unsure, check your press manual or contact the manufacturer.
No. This is a .338 caliber–specific collet. Each caliber requires its own correctly sized collet to ensure a proper grip on the bullet without damage.
This collet threads into your existing reloading press and works with the standard puller assembly. Verify that your press is compatible with the 7/8-inch-14 thread before purchase.
The collet grips the bullet, not the case. Make sure the collet is properly tightened around the bullet before working the press ram, and work the ram smoothly without sudden pressure to extract the bullet cleanly.
SKU: 115796161 • Weight: 0.01oz
Availability: In Stock
The RCBS .338 Caliber Bullet Puller Collet is a precision reloading tool designed specifically for reloaders who need to safely extract jacketed bullets from fired brass cases without damage. This collet-style puller threads into any single-stage reloading press equipped with standard 7/8-inch-14 threads—which covers the vast majority of presses on the market—making it a practical solution for anyone working up loads, managing rejects, or salvaging components during development.
Bullet pulling is a regular part of handloading, whether you're recovering quality brass from a failed load, adjusting bullet seating, or pulling bullets from cases that didn't perform as expected. The RCBS design pulls the bullet cleanly without marring your cases or the bullet itself—critical when you want to reuse expensive components. Setup is straightforward: install the caliber-specific collet, seat your cartridge in the press, tighten the collet around the bullet, and work the ram to extract it.
This .338 collet is a replacement component, so compatibility with your existing RCBS press setup depends on your current puller assembly and press thread configuration. Before ordering, confirm your press has the standard 7/8-14 thread pattern and verify that the collet size matches your .338 caliber needs. For reloaders building or maintaining a .338 cartridge setup, having the right puller tool on hand keeps component recovery efficient and your workflow moving.
| Caliber | .338 |
| Thread Pattern | 7/8-inch-14 |
| Type | Collet |
| Compatible Press Style | Single-stage press with standard threads |
Yes, if your single-stage reloading press has the standard 7/8-inch-14 thread pattern. RCBS designed this collet to fit most common press configurations, but it's worth verifying your press threading before ordering. If you're unsure, check your press manual or contact the manufacturer.
No. This is a .338 caliber–specific collet. Each caliber requires its own correctly sized collet to ensure a proper grip on the bullet without damage.
This collet threads into your existing reloading press and works with the standard puller assembly. Verify that your press is compatible with the 7/8-inch-14 thread before purchase.
The collet grips the bullet, not the case. Make sure the collet is properly tightened around the bullet before working the press ram, and work the ram smoothly without sudden pressure to extract the bullet cleanly.
SKU: 115796161 • Weight: 0.01oz