Availability: In Stock
The RCBS 9412 Pow'r Pull Bullet Puller is a handheld reloading tool that makes it fast and simple to separate bullets from loaded cartridges—a critical skill when you need to salvage components from bad loads or rework ammunition. Built with a rugged one-piece polymer body, this bullet puller handles centerfire cases from .22 Hornet and 5.7x28mm up through the larger WSM and RUM magnum families. The three interchangeable case-holding chucks grip the case rim securely, so you just tap the tool downward on a solid surface and gravity does the work—powder and bullet drop cleanly into the collection chamber below. It's one of those garage essentials that saves time and frustration when reloading goes sideways.
Reloaders who work with multiple cartridge sizes appreciate having a tool that spans the common range without needing separate pullers. The polymer construction keeps it lightweight and non-marring, and the three-chuck system means you can keep different sizes loaded and ready. Whether you're pulling bullets from a squib load, recovering components from an over-powder charge, or just experimenting with bullet weights, this puller handles the job cleanly. Note that this tool is designed for centerfire cartridges only and is not suitable for rimfire ammunition.
If you're running a serious reloading bench, the Pow'r Pull belongs in your toolkit. It's straightforward, reliable, and built to last through years of component salvage and experimentation.
| Product Name | RCBS 9412 Pow'r Pull Bullet Puller |
| Chucks Included | Three case-holding chucks |
| Cartridge Range | .22 Hornet, 5.7x28mm through WSM and RUM magnums |
| Construction | One-piece polymer body |
| Rimfire Compatible | No |
The RCBS Pow'r Pull comes with three interchangeable chucks that accommodate centerfire cases ranging from .22 Hornet and 5.7x28mm up through the larger WSM and RUM magnum cartridges. The three-chuck system lets you work across most common reloading calibers without purchasing additional pullers.
No. This tool is designed for centerfire cartridges only and is not compatible with rimfire ammunition.
The three-jaw chuck grips the case rim securely. You simply place the loaded cartridge in the chuck, then tap the tool downward on a solid surface. Gravity separates the bullet and powder, which drop into the integrated collection chamber below.
The RCBS 9412 Pow'r Pull includes the puller itself and three case-holding chucks for handling different cartridge sizes.
SKU: 115718920 • Width: 5.8in • Height: 1in • Depth: 15.1in • Weight: 0.5oz
Availability: In Stock
The RCBS 9412 Pow'r Pull Bullet Puller is a handheld reloading tool that makes it fast and simple to separate bullets from loaded cartridges—a critical skill when you need to salvage components from bad loads or rework ammunition. Built with a rugged one-piece polymer body, this bullet puller handles centerfire cases from .22 Hornet and 5.7x28mm up through the larger WSM and RUM magnum families. The three interchangeable case-holding chucks grip the case rim securely, so you just tap the tool downward on a solid surface and gravity does the work—powder and bullet drop cleanly into the collection chamber below. It's one of those garage essentials that saves time and frustration when reloading goes sideways.
Reloaders who work with multiple cartridge sizes appreciate having a tool that spans the common range without needing separate pullers. The polymer construction keeps it lightweight and non-marring, and the three-chuck system means you can keep different sizes loaded and ready. Whether you're pulling bullets from a squib load, recovering components from an over-powder charge, or just experimenting with bullet weights, this puller handles the job cleanly. Note that this tool is designed for centerfire cartridges only and is not suitable for rimfire ammunition.
If you're running a serious reloading bench, the Pow'r Pull belongs in your toolkit. It's straightforward, reliable, and built to last through years of component salvage and experimentation.
| Product Name | RCBS 9412 Pow'r Pull Bullet Puller |
| Chucks Included | Three case-holding chucks |
| Cartridge Range | .22 Hornet, 5.7x28mm through WSM and RUM magnums |
| Construction | One-piece polymer body |
| Rimfire Compatible | No |
The RCBS Pow'r Pull comes with three interchangeable chucks that accommodate centerfire cases ranging from .22 Hornet and 5.7x28mm up through the larger WSM and RUM magnum cartridges. The three-chuck system lets you work across most common reloading calibers without purchasing additional pullers.
No. This tool is designed for centerfire cartridges only and is not compatible with rimfire ammunition.
The three-jaw chuck grips the case rim securely. You simply place the loaded cartridge in the chuck, then tap the tool downward on a solid surface. Gravity separates the bullet and powder, which drop into the integrated collection chamber below.
The RCBS 9412 Pow'r Pull includes the puller itself and three case-holding chucks for handling different cartridge sizes.
SKU: 115718920 • Width: 5.8in • Height: 1in • Depth: 15.1in • Weight: 0.5oz