$15.53
Loading...
Loading...
Loading...
Availability: In Stock
If you're reloading .257 Roberts ammunition and need to salvage bullets from loaded rounds, the RCBS 9422 Bullet Puller Collet gives you a clean, press-mounted solution. This specialized reloading tool lets you extract jacketed bullets without marring them or damaging your brass—a critical concern when components cost money and your brass has value. The collet-style design threads into standard single-stage reloading presses using the familiar 7/8-inch-14 thread pattern, so if you've already got a press on your bench, you're ready to go.
Setup is straightforward: install the .257 Roberts collet into your press just like you'd seat a sizing die, insert your loaded cartridge, and operate the ram. Once the round is chambered in the collet, tighten it down and lower the ram—the mechanical grip extracts the bullet cleanly. It's faster and more controlled than striking the case against a block, and you keep both the bullet and the brass intact for reuse or inventory.
Reloaders reach for bullet pullers when they've loaded the wrong bullet, discovered a powder charge error before firing, or simply want to recycle components from test rounds. The RCBS design has earned trust in the reloading community for its reliability and ease of use across calibers when you swap the appropriate collet.
| Product | RCBS 9422 Bullet Puller Collet |
| Caliber | .257 Roberts |
| Thread Standard | 7/8-inch-14 |
| Type | Collet-style bullet puller |
| Compatibility | Single-stage reloading presses with 7/8-inch-14 threads |
Yes, if your press features the standard 7/8-inch-14 thread pattern used on nearly all single-stage reloading presses. Install it the same way you'd install a sizing die.
This puller includes a collet sized specifically for .257 Roberts. If you reload other calibers, you'll need the appropriate collet for each.
The collet design grips the bullet body without deforming it, allowing you to safely extract bullets from loaded ammunition for reuse or inventory purposes.
You receive the RCBS 9422 puller with the .257 Roberts collet ready to install in your press.
SKU: 115669976 • Width: 0.7in • Height: 0.4in • Depth: 2.5in • Weight: 0.05oz
Availability: In Stock
If you're reloading .257 Roberts ammunition and need to salvage bullets from loaded rounds, the RCBS 9422 Bullet Puller Collet gives you a clean, press-mounted solution. This specialized reloading tool lets you extract jacketed bullets without marring them or damaging your brass—a critical concern when components cost money and your brass has value. The collet-style design threads into standard single-stage reloading presses using the familiar 7/8-inch-14 thread pattern, so if you've already got a press on your bench, you're ready to go.
Setup is straightforward: install the .257 Roberts collet into your press just like you'd seat a sizing die, insert your loaded cartridge, and operate the ram. Once the round is chambered in the collet, tighten it down and lower the ram—the mechanical grip extracts the bullet cleanly. It's faster and more controlled than striking the case against a block, and you keep both the bullet and the brass intact for reuse or inventory.
Reloaders reach for bullet pullers when they've loaded the wrong bullet, discovered a powder charge error before firing, or simply want to recycle components from test rounds. The RCBS design has earned trust in the reloading community for its reliability and ease of use across calibers when you swap the appropriate collet.
| Product | RCBS 9422 Bullet Puller Collet |
| Caliber | .257 Roberts |
| Thread Standard | 7/8-inch-14 |
| Type | Collet-style bullet puller |
| Compatibility | Single-stage reloading presses with 7/8-inch-14 threads |
Yes, if your press features the standard 7/8-inch-14 thread pattern used on nearly all single-stage reloading presses. Install it the same way you'd install a sizing die.
This puller includes a collet sized specifically for .257 Roberts. If you reload other calibers, you'll need the appropriate collet for each.
The collet design grips the bullet body without deforming it, allowing you to safely extract bullets from loaded ammunition for reuse or inventory purposes.
You receive the RCBS 9422 puller with the .257 Roberts collet ready to install in your press.
SKU: 115669976 • Width: 0.7in • Height: 0.4in • Depth: 2.5in • Weight: 0.05oz
