$16.43
Availability: In Stock
The RCBS 9425 7mm standard bullet puller collet is a precision metal tool built to help you safely extract jacketed bullets from fired brass without damage—a critical step when you need to salvage cases from pulled ammunition, flawed loads, or experimental rounds. If you reload on a single-stage press, this collet delivers a straightforward, repeatable way to separate bullets from cartridges so you can resize and reuse the brass. The redesigned collet fits presses with standard 7/8-inch-14 threads, the industry norm for nearly all single-stage loaders.
Bullet pulling can feel like a chore if you're using improvised methods or inferior tools. This collet changes that. Simply install it in your press, insert the correct caliber collet for your 7mm cartridge, seat your loaded round in the press, and tighten the collet onto the bullet. Lower the ram—the bullet pulls cleanly free. The process is direct and repeatable, taking the guesswork out of salvaging cases and reducing the risk of deformation that other pullers can cause.
Whether you're a precision reloader who occasionally needs to recover bullets, or you work with experimental loads and need a reliable way to disassemble them, the RCBS standard bullet puller collet is a no-nonsense tool that earns its place on your reloading bench. Its solid metal construction and straightforward design mean fewer complications and more confidence when you're breaking down loaded ammunition.
| Brand | RCBS |
| Model | 9425 |
| Type | Standard Bullet Puller Collet |
| Caliber | 7mm |
| Thread Type | 7/8-inch-14 (standard single-stage press) |
| Material | Precision metal |
Yes, provided your press has standard 7/8-inch-14 threads. This is the industry standard for nearly all single-stage reloading presses. If you're unsure about your press threading, check your reloader's manual or contact your press manufacturer.
No. This is a caliber-specific tool designed for 7mm cartridges. RCBS makes separate collets for other calibers, so you'll need the correct collet for the ammunition you're pulling.
The redesigned collet is engineered to extract bullets without harming either the projectile or the case, allowing you to salvage both components for reuse. Proper setup and technique—as described in the operating instructions—are key to protecting your materials.
Install the collet in your press, select the correct caliber collet for your 7mm round, insert your loaded cartridge into the press, tighten the collet onto the bullet, and lower the ram. The bullet will pull free from the case. Always refer to the product instructions and your press manual for detailed setup guidance.
SKU: 115684895 • Width: 1.5in • Height: 0.8in • Depth: 2.6in • Weight: 0.06oz
Availability: In Stock
The RCBS 9425 7mm standard bullet puller collet is a precision metal tool built to help you safely extract jacketed bullets from fired brass without damage—a critical step when you need to salvage cases from pulled ammunition, flawed loads, or experimental rounds. If you reload on a single-stage press, this collet delivers a straightforward, repeatable way to separate bullets from cartridges so you can resize and reuse the brass. The redesigned collet fits presses with standard 7/8-inch-14 threads, the industry norm for nearly all single-stage loaders.
Bullet pulling can feel like a chore if you're using improvised methods or inferior tools. This collet changes that. Simply install it in your press, insert the correct caliber collet for your 7mm cartridge, seat your loaded round in the press, and tighten the collet onto the bullet. Lower the ram—the bullet pulls cleanly free. The process is direct and repeatable, taking the guesswork out of salvaging cases and reducing the risk of deformation that other pullers can cause.
Whether you're a precision reloader who occasionally needs to recover bullets, or you work with experimental loads and need a reliable way to disassemble them, the RCBS standard bullet puller collet is a no-nonsense tool that earns its place on your reloading bench. Its solid metal construction and straightforward design mean fewer complications and more confidence when you're breaking down loaded ammunition.
| Brand | RCBS |
| Model | 9425 |
| Type | Standard Bullet Puller Collet |
| Caliber | 7mm |
| Thread Type | 7/8-inch-14 (standard single-stage press) |
| Material | Precision metal |
Yes, provided your press has standard 7/8-inch-14 threads. This is the industry standard for nearly all single-stage reloading presses. If you're unsure about your press threading, check your reloader's manual or contact your press manufacturer.
No. This is a caliber-specific tool designed for 7mm cartridges. RCBS makes separate collets for other calibers, so you'll need the correct collet for the ammunition you're pulling.
The redesigned collet is engineered to extract bullets without harming either the projectile or the case, allowing you to salvage both components for reuse. Proper setup and technique—as described in the operating instructions—are key to protecting your materials.
Install the collet in your press, select the correct caliber collet for your 7mm round, insert your loaded cartridge into the press, tighten the collet onto the bullet, and lower the ram. The bullet will pull free from the case. Always refer to the product instructions and your press manual for detailed setup guidance.
SKU: 115684895 • Width: 1.5in • Height: 0.8in • Depth: 2.6in • Weight: 0.06oz