$16.49
Availability: In Stock
The RCBS 9432 Standard 40 Cal Bullet Puller Collet is a precision metal collet designed to help reloaders safely extract jacketed bullets from fired brass without damaging either component. Whether you're sorting through fired cases, salvaging bullets from misspent loads, or working with mixed brass, this .40-caliber collet gives you a clean, repeatable way to separate bullets from their casings. If you reload on a single-stage press, this tool threads directly into your setup using standard 7/8-inch-14 dies — the same thread pattern found on nearly all conventional presses.
The workflow is straightforward: install the .40-caliber collet in your press, insert your loaded round into the shellholder, tighten the collet around the bullet, then work the ram to extract it. The precision metal construction grips firmly without marring bullets or crushed cases, so you recover usable components for the next reload cycle. Reloaders who load multiple calibers appreciate having caliber-specific collets on hand, and the .40 Cal version is sized to handle standard .40 S&W ammunition.
This is workshop equipment built to work, not impress — the kind of practical gear that earns a permanent spot on your reloading bench. RCBS has been in the ammunition component business long enough to know what works, and their standard line of bullet pullers reflects that focus on reliability over frills.
| Caliber | .40 Cal |
| Thread Size | 7/8-inch-14 Standard |
| Material | Precision Metal |
| Type | Bullet Puller Collet |
| Brand | RCBS |
| Model | 9432 |
Yes. The RCBS 9432 uses standard 7/8-inch-14 threads, which are the thread pattern on nearly all single-stage reloading presses. Simply install it where you'd install a sizing die or other standard die.
This is a .40-caliber-specific collet, designed to extract bullets from .40 S&W ammunition. RCBS makes separate collets for other calibers, so you'll want the .40 version for your .40 S&W brass.
The precision metal collet grips the bullet securely without marring it or crushing the brass case, allowing you to safely recover and reuse both components.
Install the collet in your press, place a loaded round in the shellholder, tighten the collet around the bullet, then work the ram up and down to extract the bullet from the case.
SKU: 115682960 • Width: 1.9in • Height: 0.7in • Depth: 5.8in • Weight: 0.08oz
Availability: In Stock
The RCBS 9432 Standard 40 Cal Bullet Puller Collet is a precision metal collet designed to help reloaders safely extract jacketed bullets from fired brass without damaging either component. Whether you're sorting through fired cases, salvaging bullets from misspent loads, or working with mixed brass, this .40-caliber collet gives you a clean, repeatable way to separate bullets from their casings. If you reload on a single-stage press, this tool threads directly into your setup using standard 7/8-inch-14 dies — the same thread pattern found on nearly all conventional presses.
The workflow is straightforward: install the .40-caliber collet in your press, insert your loaded round into the shellholder, tighten the collet around the bullet, then work the ram to extract it. The precision metal construction grips firmly without marring bullets or crushed cases, so you recover usable components for the next reload cycle. Reloaders who load multiple calibers appreciate having caliber-specific collets on hand, and the .40 Cal version is sized to handle standard .40 S&W ammunition.
This is workshop equipment built to work, not impress — the kind of practical gear that earns a permanent spot on your reloading bench. RCBS has been in the ammunition component business long enough to know what works, and their standard line of bullet pullers reflects that focus on reliability over frills.
| Caliber | .40 Cal |
| Thread Size | 7/8-inch-14 Standard |
| Material | Precision Metal |
| Type | Bullet Puller Collet |
| Brand | RCBS |
| Model | 9432 |
Yes. The RCBS 9432 uses standard 7/8-inch-14 threads, which are the thread pattern on nearly all single-stage reloading presses. Simply install it where you'd install a sizing die or other standard die.
This is a .40-caliber-specific collet, designed to extract bullets from .40 S&W ammunition. RCBS makes separate collets for other calibers, so you'll want the .40 version for your .40 S&W brass.
The precision metal collet grips the bullet securely without marring it or crushing the brass case, allowing you to safely recover and reuse both components.
Install the collet in your press, place a loaded round in the shellholder, tighten the collet around the bullet, then work the ram up and down to extract the bullet from the case.
SKU: 115682960 • Width: 1.9in • Height: 0.7in • Depth: 5.8in • Weight: 0.08oz