$15.53
Loading...
Loading...
Loading...
Availability: In Stock
The RCBS 9430 .35 Cal Bullet Puller Collet is a precision metal tool designed for reloaders who need to safely remove jacketed bullets from fired brass without damaging either component. If you're recovering brass or fixing a loading mistake, this collet-style puller threads into any single-stage reloading press with standard 7/8-inch-14 threads—which means it's compatible with nearly every press on the market. The redesigned collet geometry grips bullets securely while protecting your cases, making this one of the most reliable ways to salvage components during the reloading process.
Using the RCBS bullet puller is straightforward: install the .35 caliber collet into your press, seat your loaded cartridge in the shellholder, tighten the collet around the bullet, and work the press ram to extract it. The metal construction and tight tolerances mean the collet holds its grip shot after shot, and because it's caliber-specific, you get a perfect fit for .35 caliber rounds. Whether you're a precision handloader pulling bullets to reuse brass or a competitive shooter recovering components after load development, this tool pays for itself after just a few salvaged cases.
RCBS has built a reputation on reloading tools that work reliably for decades, and this bullet puller is no exception. It's a simple, effective solution to one of reloading's most common tasks—and one less step toward wasting good brass.
| Brand | RCBS |
| Model | 9430 |
| Caliber | .35 |
| Thread Type | 7/8-inch-14 (standard single-stage press threads) |
| Material | Metal |
The RCBS 9430 threads into any single-stage press with standard 7/8-inch-14 threads, which covers nearly all single-stage models on the market. If you're unsure about your press compatibility, check whether it accepts standard RCBS dies—this puller uses the same thread standard.
This is the .35 caliber collet, designed specifically for .35 caliber cartridges. You'll need a different collet for other calibers.
The RCBS bullet puller collet is designed to remove jacketed bullets without damage. We recommend contacting RCBS directly to confirm safe use with lead bullets.
The product includes the .35 caliber collet; the puller body threads directly into your press die station.
SKU: 115669750 • Width: 0.9in • Height: 0.3in • Depth: 2in • Weight: 0.06oz
Availability: In Stock
The RCBS 9430 .35 Cal Bullet Puller Collet is a precision metal tool designed for reloaders who need to safely remove jacketed bullets from fired brass without damaging either component. If you're recovering brass or fixing a loading mistake, this collet-style puller threads into any single-stage reloading press with standard 7/8-inch-14 threads—which means it's compatible with nearly every press on the market. The redesigned collet geometry grips bullets securely while protecting your cases, making this one of the most reliable ways to salvage components during the reloading process.
Using the RCBS bullet puller is straightforward: install the .35 caliber collet into your press, seat your loaded cartridge in the shellholder, tighten the collet around the bullet, and work the press ram to extract it. The metal construction and tight tolerances mean the collet holds its grip shot after shot, and because it's caliber-specific, you get a perfect fit for .35 caliber rounds. Whether you're a precision handloader pulling bullets to reuse brass or a competitive shooter recovering components after load development, this tool pays for itself after just a few salvaged cases.
RCBS has built a reputation on reloading tools that work reliably for decades, and this bullet puller is no exception. It's a simple, effective solution to one of reloading's most common tasks—and one less step toward wasting good brass.
| Brand | RCBS |
| Model | 9430 |
| Caliber | .35 |
| Thread Type | 7/8-inch-14 (standard single-stage press threads) |
| Material | Metal |
The RCBS 9430 threads into any single-stage press with standard 7/8-inch-14 threads, which covers nearly all single-stage models on the market. If you're unsure about your press compatibility, check whether it accepts standard RCBS dies—this puller uses the same thread standard.
This is the .35 caliber collet, designed specifically for .35 caliber cartridges. You'll need a different collet for other calibers.
The RCBS bullet puller collet is designed to remove jacketed bullets without damage. We recommend contacting RCBS directly to confirm safe use with lead bullets.
The product includes the .35 caliber collet; the puller body threads directly into your press die station.
SKU: 115669750 • Width: 0.9in • Height: 0.3in • Depth: 2in • Weight: 0.06oz