
Availability: In Stock
The EGW Savage 10-16 Round Back Short Action scope base brings modern Picatinny rail mounting to your Savage short-action receiver without the hassle of drilling and tapping. Built from rigid 6061 T6 aluminum and machined to MIL-STD 1913 specifications, this one-piece mount works directly with your factory scope holes and accepts any standard Picatinny or Weaver rings—giving you freedom to dial in eye relief and swap optics to match your hunting or range setup.
If you're running a Savage 10 or 16 and want a clean, modern mounting solution, this base eliminates the guesswork. The precision-machined design keeps things lightweight without sacrificing rigidity, and the cross-slots are gauged to within .002 inches for consistent, repeatable accuracy. You get the screws and Torx wrench in the box—just follow EGW's torque recommendation of 20 inch-lbs with a dab of blue Loctite and you're ready to glass.
The 0 MOA configuration mounts parallel to your receiver, making it the straightforward choice for shooters who want their scope sitting naturally without cant or offset. Whether you're setting up for whitetail, target work, or cross-training at the range, this base provides the mounting stability and flexibility serious rifle owners expect.
| Brand | EGW |
| Mount Type | One-piece Picatinny rail base |
| Fit | Savage 10, 16 round back short action |
| Material | 6061 T6 extruded aluminum |
| Picatinny Spec | MIL-STD 1913 ±.002" |
| Ring Compatibility | Picatinny or Weaver |
| MOA Offset | 0 MOA |
| Recommended Torque | 20 inch-lbs |
Yes. The EGW base is drilled to fit the factory scope mount holes on Savage short-action receivers, so no gunsmithing is required. Just install using the included Torx screws.
Any Picatinny or Weaver rings will work. This gives you flexibility to dial in your preferred eye relief and choose from a wide range of ring styles and heights.
The mount includes socket head Torx screws and the Torx wrench needed for installation. EGW recommends applying blue Loctite and torquing to 20 inch-lbs.
0 MOA means the rail mounts parallel to your receiver with no built-in elevation offset. This is the standard configuration for most hunting and range setups.
SKU: 197556401 • Weight: 0.25oz






Availability: In Stock
The EGW Savage 10-16 Round Back Short Action scope base brings modern Picatinny rail mounting to your Savage short-action receiver without the hassle of drilling and tapping. Built from rigid 6061 T6 aluminum and machined to MIL-STD 1913 specifications, this one-piece mount works directly with your factory scope holes and accepts any standard Picatinny or Weaver rings—giving you freedom to dial in eye relief and swap optics to match your hunting or range setup.
If you're running a Savage 10 or 16 and want a clean, modern mounting solution, this base eliminates the guesswork. The precision-machined design keeps things lightweight without sacrificing rigidity, and the cross-slots are gauged to within .002 inches for consistent, repeatable accuracy. You get the screws and Torx wrench in the box—just follow EGW's torque recommendation of 20 inch-lbs with a dab of blue Loctite and you're ready to glass.
The 0 MOA configuration mounts parallel to your receiver, making it the straightforward choice for shooters who want their scope sitting naturally without cant or offset. Whether you're setting up for whitetail, target work, or cross-training at the range, this base provides the mounting stability and flexibility serious rifle owners expect.
| Brand | EGW |
| Mount Type | One-piece Picatinny rail base |
| Fit | Savage 10, 16 round back short action |
| Material | 6061 T6 extruded aluminum |
| Picatinny Spec | MIL-STD 1913 ±.002" |
| Ring Compatibility | Picatinny or Weaver |
| MOA Offset | 0 MOA |
| Recommended Torque | 20 inch-lbs |
Yes. The EGW base is drilled to fit the factory scope mount holes on Savage short-action receivers, so no gunsmithing is required. Just install using the included Torx screws.
Any Picatinny or Weaver rings will work. This gives you flexibility to dial in your preferred eye relief and choose from a wide range of ring styles and heights.
The mount includes socket head Torx screws and the Torx wrench needed for installation. EGW recommends applying blue Loctite and torquing to 20 inch-lbs.
0 MOA means the rail mounts parallel to your receiver with no built-in elevation offset. This is the standard configuration for most hunting and range setups.
SKU: 197556401 • Weight: 0.25oz
