
Availability: In Stock
The EGW Savage 10-16 flat back short action scope base brings modern Picatinny rail versatility to your Savage short-action receiver without requiring any gunsmithing. This one-piece mount uses the factory scope mount hole pattern on Savage 10 and 16 receivers, so installation is straightforward and reversible. Built from precision-machined 6061 T6 aluminum, it's rigid enough for hunting and range work while remaining lightweight—and if you're running a tactical build, the milled center channel reduces weight further.
The 20 MOA rake angle is built into the base itself, which means you gain elevation adjustment room without using up your scope's internal turret travel. That's valuable if you're set up for longer-range work or need extra elevation for steep terrain hunting. The full-width Picatinny slots are machined to MIL-STD 1913 spec (±.002"), so ring fit is solid and repeatable whether you run Picatinny or Weaver rings.
EGW includes the socket head Torx screws and wrench you'll need for installation. They recommend 20 inch-pounds of torque and a small drop of blue Loctite to keep things locked down through recoil and seasonal temperature shifts. That's a no-nonsense, field-proven approach.
| Manufacturer | EGW (E.M. Wesson Group) |
| Firearm Compatibility | Savage 10, 16 (short action) |
| Mount Type | Flat back, one-piece |
| Rail Standard | Picatinny (MIL-STD 1913) |
| Ring Compatibility | Picatinny or Weaver |
| Elevation Rake | 20 MOA |
| Material | 6061 T6 extruded aluminum |
| Slot Tolerance | ±.002" (MIL-STD 1913 gauge) |
| Recommended Torque | 20 inch-pounds |
| Recommended Loctite | Blue (medium strength) |
| Installation Hardware | Socket head Torx screws with wrench included |
This base is designed for Savage 10 and 16 short-action receivers. It drills and mounts to the factory scope mount holes on those platforms, so no gunsmithing is required.
Yes. While the base features MIL-STD 1913 Picatinny slots, the slot and rail spacing will work with standard Weaver rings as well as Picatinny rings.
The 20 MOA angle is machined into the base itself, tilting your scope upward. This gives you additional elevation adjustment without using your scope's internal turret range, which is helpful for longer-distance shooting or steep uphill/downhill hunting angles.
The base comes with socket head Torx screws for mounting and a wrench to install them. EGW recommends applying blue Loctite and torquing to 20 inch-pounds during installation.
SKU: 197556215 • Weight: 0.14oz






Availability: In Stock
The EGW Savage 10-16 flat back short action scope base brings modern Picatinny rail versatility to your Savage short-action receiver without requiring any gunsmithing. This one-piece mount uses the factory scope mount hole pattern on Savage 10 and 16 receivers, so installation is straightforward and reversible. Built from precision-machined 6061 T6 aluminum, it's rigid enough for hunting and range work while remaining lightweight—and if you're running a tactical build, the milled center channel reduces weight further.
The 20 MOA rake angle is built into the base itself, which means you gain elevation adjustment room without using up your scope's internal turret travel. That's valuable if you're set up for longer-range work or need extra elevation for steep terrain hunting. The full-width Picatinny slots are machined to MIL-STD 1913 spec (±.002"), so ring fit is solid and repeatable whether you run Picatinny or Weaver rings.
EGW includes the socket head Torx screws and wrench you'll need for installation. They recommend 20 inch-pounds of torque and a small drop of blue Loctite to keep things locked down through recoil and seasonal temperature shifts. That's a no-nonsense, field-proven approach.
| Manufacturer | EGW (E.M. Wesson Group) |
| Firearm Compatibility | Savage 10, 16 (short action) |
| Mount Type | Flat back, one-piece |
| Rail Standard | Picatinny (MIL-STD 1913) |
| Ring Compatibility | Picatinny or Weaver |
| Elevation Rake | 20 MOA |
| Material | 6061 T6 extruded aluminum |
| Slot Tolerance | ±.002" (MIL-STD 1913 gauge) |
| Recommended Torque | 20 inch-pounds |
| Recommended Loctite | Blue (medium strength) |
| Installation Hardware | Socket head Torx screws with wrench included |
This base is designed for Savage 10 and 16 short-action receivers. It drills and mounts to the factory scope mount holes on those platforms, so no gunsmithing is required.
Yes. While the base features MIL-STD 1913 Picatinny slots, the slot and rail spacing will work with standard Weaver rings as well as Picatinny rings.
The 20 MOA angle is machined into the base itself, tilting your scope upward. This gives you additional elevation adjustment without using your scope's internal turret range, which is helpful for longer-distance shooting or steep uphill/downhill hunting angles.
The base comes with socket head Torx screws for mounting and a wrench to install them. EGW recommends applying blue Loctite and torquing to 20 inch-pounds during installation.
SKU: 197556215 • Weight: 0.14oz
