
Availability: In Stock
The EGW Savage 10-16 flat back short action scope base brings modern Picatinny rail mounting to your Savage short action receiver without any gunsmithing. This one-piece aluminum mount bolts directly to your factory scope holes, giving you the freedom to run standard Picatinny or Weaver rings and swap optics quickly. It's the kind of no-fuss upgrade that turns a stock rifle into a platform you can actually experiment with.
Built from extruded 6061-T6 aluminum and precision-machined to MIL-STD 1913 Picatinny spec (±.002"), the base delivers genuine rigidity without unnecessary bulk. The full-width cross-slots accept any quality Picatinny mount, and the flat profile gives you flexibility with eye relief and scope choice—whether you're going tactical, hunting, or targeting. EGW includes the socket head Torx screws and wrench you need; just torque them to 20 inch-pounds with a drop of blue loctite and you're done.
If you own a Savage 10 or 16 short action and want to move away from proprietary factory rings, this base opens up your options without the expense and hassle of a gunsmith visit. It's a straightforward, durable solution for hunters and shooters who want control over their setup.
| Brand | EGW |
| Fits | Savage 10 and 16 Short Action |
| Mount Type | One-piece Picatinny rail base |
| Material | Extruded 6061-T6 aluminum |
| Rail Standard | MIL-STD 1913 Picatinny (±.002") |
| Compatible Rings | Picatinny and Weaver |
| MOA | 0 MOA (flat back) |
| Includes | Socket head Torx screws and hex wrench |
| Recommended Torque | 20 inch-pounds |
Yes. The EGW mount is engineered to bolt directly to the factory scope holes on Savage 10 and 16 short action receivers with no additional drilling or tapping required.
Any standard Picatinny or Weaver rings will mount to this base. The Picatinny slots are machined to MIL-STD 1913 specification, ensuring compatibility with quality rings from most manufacturers.
The base comes with socket head Torx screws for mounting to your receiver and a hex wrench for installation. EGW recommends torquing the screws to 20 inch-pounds and applying a drop of blue loctite to the threads.
No. This is a flat back (0 MOA) mount, meaning it mounts at zero angle relative to the receiver. Any elevation adjustment comes from your scope's internal turrets.
SKU: 197556308 • Weight: 0.2oz






Availability: In Stock
The EGW Savage 10-16 flat back short action scope base brings modern Picatinny rail mounting to your Savage short action receiver without any gunsmithing. This one-piece aluminum mount bolts directly to your factory scope holes, giving you the freedom to run standard Picatinny or Weaver rings and swap optics quickly. It's the kind of no-fuss upgrade that turns a stock rifle into a platform you can actually experiment with.
Built from extruded 6061-T6 aluminum and precision-machined to MIL-STD 1913 Picatinny spec (±.002"), the base delivers genuine rigidity without unnecessary bulk. The full-width cross-slots accept any quality Picatinny mount, and the flat profile gives you flexibility with eye relief and scope choice—whether you're going tactical, hunting, or targeting. EGW includes the socket head Torx screws and wrench you need; just torque them to 20 inch-pounds with a drop of blue loctite and you're done.
If you own a Savage 10 or 16 short action and want to move away from proprietary factory rings, this base opens up your options without the expense and hassle of a gunsmith visit. It's a straightforward, durable solution for hunters and shooters who want control over their setup.
| Brand | EGW |
| Fits | Savage 10 and 16 Short Action |
| Mount Type | One-piece Picatinny rail base |
| Material | Extruded 6061-T6 aluminum |
| Rail Standard | MIL-STD 1913 Picatinny (±.002") |
| Compatible Rings | Picatinny and Weaver |
| MOA | 0 MOA (flat back) |
| Includes | Socket head Torx screws and hex wrench |
| Recommended Torque | 20 inch-pounds |
Yes. The EGW mount is engineered to bolt directly to the factory scope holes on Savage 10 and 16 short action receivers with no additional drilling or tapping required.
Any standard Picatinny or Weaver rings will mount to this base. The Picatinny slots are machined to MIL-STD 1913 specification, ensuring compatibility with quality rings from most manufacturers.
The base comes with socket head Torx screws for mounting to your receiver and a hex wrench for installation. EGW recommends torquing the screws to 20 inch-pounds and applying a drop of blue loctite to the threads.
No. This is a flat back (0 MOA) mount, meaning it mounts at zero angle relative to the receiver. Any elevation adjustment comes from your scope's internal turrets.
SKU: 197556308 • Weight: 0.2oz
