
Availability: In Stock
Current Stock: Out of stock
The EGW Savage 110-116 Round Back Long Action scope base brings versatility and precision to your rifle without requiring gunsmithing. This one-piece Picatinny rail mounts directly to the factory scope holes on Savage 110 and 116 long-action receivers, giving you the flexibility to dial in eye relief and swap optics to match your hunting or range setup. It's engineered for shooters who want a modern rail system without drilling, tapping, or permanent modifications.
Built from 7075 T6 extruded aluminum, this base is precision-machined to rigid tolerances and designed as a heavy-duty mount that positions your scope closer to the barrel centerline than lighter alternatives—a geometry that can improve accuracy and reduce sight height. The Picatinny cross-slots are gauged to MIL-STD 1913 specs within ±.002 inches, so any standard Picatinny or Weaver scope ring will fit and stay put. Installation is straightforward: the base uses socket head Torx fasteners (included, along with wrench) and EGW recommends 20 inch-pounds of torque and a dab of blue Loctite for final security.
If you run a Savage long-action centerfire and want to modernize your mounting system without permanent changes to the receiver, this base delivers the adjustability and precision of a dedicated rail in a drop-in package.
| Brand | EGW |
| Firearm Compatibility | Savage 110–116 Long Action (round back) |
| Rail Type | Picatinny (MIL-STD 1913) |
| Ring Type Accepted | Picatinny or Weaver |
| Material | 7075 T6 Extruded Aluminum |
| Mount Profile | Heavy Duty (.100" lower than lightweight) |
| Slot Tolerance | ±.002" to MIL-STD 1913 |
| Fastener Type | Socket Head Torx Screw |
| Recommended Torque | 20 inch-pounds |
| Includes | Torx wrench, socket head screws |
Yes—this base is designed to fit Savage 110 and 116 long-action receivers with round back design and uses the factory scope hole spacing, so no gunsmithing is needed.
Any rings with Picatinny or Weaver attachment will work. The rail's MIL-STD 1913 cross-slot spacing ensures secure, repeatable mounting with standard ring clamps.
The heavy-duty variant sits .100 inches lower, positioning your optic closer to the barrel centerline for a lower sight line and potentially improved shooting ergonomics.
The package includes socket head Torx fasteners and a Torx wrench. EGW recommends installing with 20 inch-pounds of torque and a small amount of blue Loctite on the fasteners.
SKU: 197556070 • Weight: 0.22oz






Availability: In Stock
Current Stock: Out of stock
The EGW Savage 110-116 Round Back Long Action scope base brings versatility and precision to your rifle without requiring gunsmithing. This one-piece Picatinny rail mounts directly to the factory scope holes on Savage 110 and 116 long-action receivers, giving you the flexibility to dial in eye relief and swap optics to match your hunting or range setup. It's engineered for shooters who want a modern rail system without drilling, tapping, or permanent modifications.
Built from 7075 T6 extruded aluminum, this base is precision-machined to rigid tolerances and designed as a heavy-duty mount that positions your scope closer to the barrel centerline than lighter alternatives—a geometry that can improve accuracy and reduce sight height. The Picatinny cross-slots are gauged to MIL-STD 1913 specs within ±.002 inches, so any standard Picatinny or Weaver scope ring will fit and stay put. Installation is straightforward: the base uses socket head Torx fasteners (included, along with wrench) and EGW recommends 20 inch-pounds of torque and a dab of blue Loctite for final security.
If you run a Savage long-action centerfire and want to modernize your mounting system without permanent changes to the receiver, this base delivers the adjustability and precision of a dedicated rail in a drop-in package.
| Brand | EGW |
| Firearm Compatibility | Savage 110–116 Long Action (round back) |
| Rail Type | Picatinny (MIL-STD 1913) |
| Ring Type Accepted | Picatinny or Weaver |
| Material | 7075 T6 Extruded Aluminum |
| Mount Profile | Heavy Duty (.100" lower than lightweight) |
| Slot Tolerance | ±.002" to MIL-STD 1913 |
| Fastener Type | Socket Head Torx Screw |
| Recommended Torque | 20 inch-pounds |
| Includes | Torx wrench, socket head screws |
Yes—this base is designed to fit Savage 110 and 116 long-action receivers with round back design and uses the factory scope hole spacing, so no gunsmithing is needed.
Any rings with Picatinny or Weaver attachment will work. The rail's MIL-STD 1913 cross-slot spacing ensures secure, repeatable mounting with standard ring clamps.
The heavy-duty variant sits .100 inches lower, positioning your optic closer to the barrel centerline for a lower sight line and potentially improved shooting ergonomics.
The package includes socket head Torx fasteners and a Torx wrench. EGW recommends installing with 20 inch-pounds of torque and a small amount of blue Loctite on the fasteners.
SKU: 197556070 • Weight: 0.22oz
