
Availability: In Stock
The EGW Savage 110-116 Round Back Long Action scope base brings modern Picatinny mounting versatility to classic Savage receiver architecture. If you're running a long-action Savage 110 or 116 and want the flexibility to quickly swap scopes or dial in perfect eye relief without guesswork, this one-piece aluminum rail bolts directly to your factory scope mount holes—no drilling, no tapping, no gunsmithing required. It's the straightforward way to upgrade to current optics standards while keeping your receiver stock.
Machined from 6061 T6 extruded aluminum, the base is built rigid and lightweight, with a milled center channel that cuts weight without sacrificing strength. The Picatinny slots are gauged to MIL-STD 1913 spec (±.002"), so you can mount any Picatinny or Weaver rings and move them fore and aft to dial in your ideal sight picture. That flexibility means you're not locked into one scope configuration or eye relief position—adjust your rings and you're good to go. The 20 MOA elevation built into the base gives you additional uphill correction, which is handy if you're stretching shots past 300 yards or running a lower-power scope that needs the help.
Installation is straightforward: the base includes socket head Torx screws and the wrench to drive them. EGW specs 20 inch-pounds of torque and a drop of blue Loctite for assembly—solid, conservative guidance that keeps things locked in without over-tightening aluminum. Whether you're swapping a worn scope, modernizing a hunting rifle, or just want the option to experiment with different optics, this base gives you the platform to do it.
| Brand | EGW |
| Firearm Fit | Savage 110–116 Round Back Long Action |
| Mount Type | One-piece Picatinny rail |
| Elevation Adjustment | 20 MOA |
| Material | 6061 T6 extruded aluminum |
| Rail Standard | MIL-STD 1913 Picatinny (±.002") |
| Ring Compatibility | Picatinny or Weaver |
| Installation | Bolt-on to factory scope mount holes |
| Hardware | Socket head Torx screws and wrench included |
| Recommended Torque | 20 inch-pounds (with blue Loctite) |
Yes, this base is designed for Savage 110–116 long-action rifles with round back receivers. It mounts directly to the existing factory scope mount holes with no modifications required.
The base accepts any Picatinny or Weaver scope rings, giving you broad compatibility with modern optics and ring designs.
Yes. The 20 MOA built into the base provides additional elevation adjustment, which helps when shooting at distance or steep uphill angles. It's especially useful if you're running a lower-magnification scope with limited elevation turret travel.
The base includes socket head Torx screws, a Torx wrench for assembly, and EGW's torque and Loctite recommendations (20 inch-pounds with blue Loctite).
SKU: 197556425 • Weight: 0.1oz






Availability: In Stock
The EGW Savage 110-116 Round Back Long Action scope base brings modern Picatinny mounting versatility to classic Savage receiver architecture. If you're running a long-action Savage 110 or 116 and want the flexibility to quickly swap scopes or dial in perfect eye relief without guesswork, this one-piece aluminum rail bolts directly to your factory scope mount holes—no drilling, no tapping, no gunsmithing required. It's the straightforward way to upgrade to current optics standards while keeping your receiver stock.
Machined from 6061 T6 extruded aluminum, the base is built rigid and lightweight, with a milled center channel that cuts weight without sacrificing strength. The Picatinny slots are gauged to MIL-STD 1913 spec (±.002"), so you can mount any Picatinny or Weaver rings and move them fore and aft to dial in your ideal sight picture. That flexibility means you're not locked into one scope configuration or eye relief position—adjust your rings and you're good to go. The 20 MOA elevation built into the base gives you additional uphill correction, which is handy if you're stretching shots past 300 yards or running a lower-power scope that needs the help.
Installation is straightforward: the base includes socket head Torx screws and the wrench to drive them. EGW specs 20 inch-pounds of torque and a drop of blue Loctite for assembly—solid, conservative guidance that keeps things locked in without over-tightening aluminum. Whether you're swapping a worn scope, modernizing a hunting rifle, or just want the option to experiment with different optics, this base gives you the platform to do it.
| Brand | EGW |
| Firearm Fit | Savage 110–116 Round Back Long Action |
| Mount Type | One-piece Picatinny rail |
| Elevation Adjustment | 20 MOA |
| Material | 6061 T6 extruded aluminum |
| Rail Standard | MIL-STD 1913 Picatinny (±.002") |
| Ring Compatibility | Picatinny or Weaver |
| Installation | Bolt-on to factory scope mount holes |
| Hardware | Socket head Torx screws and wrench included |
| Recommended Torque | 20 inch-pounds (with blue Loctite) |
Yes, this base is designed for Savage 110–116 long-action rifles with round back receivers. It mounts directly to the existing factory scope mount holes with no modifications required.
The base accepts any Picatinny or Weaver scope rings, giving you broad compatibility with modern optics and ring designs.
Yes. The 20 MOA built into the base provides additional elevation adjustment, which helps when shooting at distance or steep uphill angles. It's especially useful if you're running a lower-magnification scope with limited elevation turret travel.
The base includes socket head Torx screws, a Torx wrench for assembly, and EGW's torque and Loctite recommendations (20 inch-pounds with blue Loctite).
SKU: 197556425 • Weight: 0.1oz
