EGW197556274
Egw Remington 783 Short Action 0 Moa$35.99
Availability: In Stock
The EGW Remington 783 Long Action scope base gives you a modern Picatinny rail system without the gunsmith work. Built to fit factory scope mount holes on the Remington 783 long action receiver, this one-piece base lets you dial in eye relief quickly and run virtually any Picatinny or Weaver scope rings—giving you real flexibility when choosing optics for hunting, precision rifle work, or the range.
Machined from 6061 T6 extruded aluminum, the EGW base is rigid and lightweight. The full-width Picatinny slots are precision gauged to military spec (MIL-STD 1913) within ±.002 inches, so your rings sit square and secure every time. The 0 MOA design means the base itself adds no cant or elevation bias—you're working with a truly flat foundation for mounting. Installation is straightforward: it uses your Remington 783's existing receiver holes, no drilling or tapping required.
The mount ships with socket head Torx screws and a wrench for assembly. EGW recommends 20 inch-pounds of torque and a drop of blue Loctite to keep everything locked in place under recoil and field use.
| Brand | EGW |
| Firearm Fit | Remington 783 Long Action |
| Mount Type | One-Piece Picatinny Scope Base |
| MOA | 0 MOA |
| Rail Standard | Picatinny (MIL-STD 1913) |
| Compatible Rings | Picatinny or Weaver |
| Material | 6061 T6 Extruded Aluminum |
| Slot Tolerance | ±.002 inches |
| Recommended Torque | 20 inch-pounds |
| Includes | Socket head Torx screws and wrench |
Yes. The EGW Remington 783 Long Action base is designed to use the factory scope mount holes on the receiver, so installation requires no drilling, tapping, or modification to your rifle.
The base accepts both Picatinny and Weaver scope rings, giving you broad compatibility with most modern scope mounting systems.
0 MOA indicates the base itself adds no angle or elevation bias. It provides a flat, neutral mounting plane, so any vertical adjustment comes entirely from your scope turrets and rings—useful for building a clean, zero-reference setup.
The base comes with socket head Torx screws, a wrench, and straightforward assembly hardware. EGW recommends applying blue Loctite and torquing to 20 inch-pounds during installation.
SKU: 197556187 • Weight: 0.05oz
Availability: In Stock
The EGW Remington 783 Long Action scope base gives you a modern Picatinny rail system without the gunsmith work. Built to fit factory scope mount holes on the Remington 783 long action receiver, this one-piece base lets you dial in eye relief quickly and run virtually any Picatinny or Weaver scope rings—giving you real flexibility when choosing optics for hunting, precision rifle work, or the range.
Machined from 6061 T6 extruded aluminum, the EGW base is rigid and lightweight. The full-width Picatinny slots are precision gauged to military spec (MIL-STD 1913) within ±.002 inches, so your rings sit square and secure every time. The 0 MOA design means the base itself adds no cant or elevation bias—you're working with a truly flat foundation for mounting. Installation is straightforward: it uses your Remington 783's existing receiver holes, no drilling or tapping required.
The mount ships with socket head Torx screws and a wrench for assembly. EGW recommends 20 inch-pounds of torque and a drop of blue Loctite to keep everything locked in place under recoil and field use.
| Brand | EGW |
| Firearm Fit | Remington 783 Long Action |
| Mount Type | One-Piece Picatinny Scope Base |
| MOA | 0 MOA |
| Rail Standard | Picatinny (MIL-STD 1913) |
| Compatible Rings | Picatinny or Weaver |
| Material | 6061 T6 Extruded Aluminum |
| Slot Tolerance | ±.002 inches |
| Recommended Torque | 20 inch-pounds |
| Includes | Socket head Torx screws and wrench |
Yes. The EGW Remington 783 Long Action base is designed to use the factory scope mount holes on the receiver, so installation requires no drilling, tapping, or modification to your rifle.
The base accepts both Picatinny and Weaver scope rings, giving you broad compatibility with most modern scope mounting systems.
0 MOA indicates the base itself adds no angle or elevation bias. It provides a flat, neutral mounting plane, so any vertical adjustment comes entirely from your scope turrets and rings—useful for building a clean, zero-reference setup.
The base comes with socket head Torx screws, a wrench, and straightforward assembly hardware. EGW recommends applying blue Loctite and torquing to 20 inch-pounds during installation.
SKU: 197556187 • Weight: 0.05oz