EGW194196355
Egw Browning X-Bolt Long Action 0 Moa$80.99
Availability: In Stock
The EGW Browning A-Bolt Long Action 0 MOA scope base gives your A-Bolt a modern Picatinny rail system without the gunsmith visit. If you're tired of being locked into factory scope mounts or limited by outdated ring choices, this one-piece aluminum base bolts straight to your receiver's existing holes—no drilling, no tapping, no hassle. You get the flexibility to dial in eye relief exactly where you want it and the freedom to run virtually any Picatinny or Weaver scope ring on the market.
Built from 6061 T6 extruded aluminum and precision-machined to MIL-STD 1913 Picatinny specifications, this mount is rigid enough for serious hunting or range work while keeping weight down. The full-width cross-slots are gauged to within +/-.002 inches—tight tolerances that translate to repeatable zero and rock-solid optic stability. The milled center channel reduces weight where it matters most, right up top on your rifle.
Installation is straightforward: the base uses socket head Torx screws (wrench included) and EGW specifies 20 inch-pounds of torque with a drop of blue Loctite for a permanent, vibration-proof fit. Once mounted, you'll have the kind of mount flexibility that lets you experiment with different magnifications, reticle types, and brands without buying a new base every time.
| Brand | EGW |
| Product Type | Scope Base / Picatinny Rail |
| Firearm Compatibility | Browning A-Bolt Long Action |
| MOA Elevation | 0 MOA |
| Material | 6061 T6 Extruded Aluminum |
| Rail Standard | Picatinny (MIL-STD 1913, ±.002" tolerance) |
| Ring Compatibility | Picatinny or Weaver scope rings |
| Fasteners | Socket head Torx screws with wrench |
| Recommended Torque | 20 inch-pounds |
| Locking Compound | Blue Loctite (recommended) |
Yes, this mount is designed for Browning A-Bolt Long Action receivers and bolts directly to the factory scope mount holes. No modifications to your rifle are required.
Any Picatinny or Weaver scope rings will work with this base. The cross-slots are gauged to MIL-STD 1913 specifications, ensuring compatibility with standard tactical and hunting rings.
No. The base includes the Picatinny rail, socket head Torx screws, and a wrench. You'll need to purchase scope rings separately to mount your optic.
Yes. The Picatinny slot-and-rail design lets you slide your rings (and thus your scope) forward or backward along the rail to dial in the perfect eye relief without removing the base.
SKU: 197556142 • Weight: 0.1oz
Availability: In Stock
The EGW Browning A-Bolt Long Action 0 MOA scope base gives your A-Bolt a modern Picatinny rail system without the gunsmith visit. If you're tired of being locked into factory scope mounts or limited by outdated ring choices, this one-piece aluminum base bolts straight to your receiver's existing holes—no drilling, no tapping, no hassle. You get the flexibility to dial in eye relief exactly where you want it and the freedom to run virtually any Picatinny or Weaver scope ring on the market.
Built from 6061 T6 extruded aluminum and precision-machined to MIL-STD 1913 Picatinny specifications, this mount is rigid enough for serious hunting or range work while keeping weight down. The full-width cross-slots are gauged to within +/-.002 inches—tight tolerances that translate to repeatable zero and rock-solid optic stability. The milled center channel reduces weight where it matters most, right up top on your rifle.
Installation is straightforward: the base uses socket head Torx screws (wrench included) and EGW specifies 20 inch-pounds of torque with a drop of blue Loctite for a permanent, vibration-proof fit. Once mounted, you'll have the kind of mount flexibility that lets you experiment with different magnifications, reticle types, and brands without buying a new base every time.
| Brand | EGW |
| Product Type | Scope Base / Picatinny Rail |
| Firearm Compatibility | Browning A-Bolt Long Action |
| MOA Elevation | 0 MOA |
| Material | 6061 T6 Extruded Aluminum |
| Rail Standard | Picatinny (MIL-STD 1913, ±.002" tolerance) |
| Ring Compatibility | Picatinny or Weaver scope rings |
| Fasteners | Socket head Torx screws with wrench |
| Recommended Torque | 20 inch-pounds |
| Locking Compound | Blue Loctite (recommended) |
Yes, this mount is designed for Browning A-Bolt Long Action receivers and bolts directly to the factory scope mount holes. No modifications to your rifle are required.
Any Picatinny or Weaver scope rings will work with this base. The cross-slots are gauged to MIL-STD 1913 specifications, ensuring compatibility with standard tactical and hunting rings.
No. The base includes the Picatinny rail, socket head Torx screws, and a wrench. You'll need to purchase scope rings separately to mount your optic.
Yes. The Picatinny slot-and-rail design lets you slide your rings (and thus your scope) forward or backward along the rail to dial in the perfect eye relief without removing the base.
SKU: 197556142 • Weight: 0.1oz