EGW197556187
Egw Remington 783 Long Action 0 Moa$35.99
Availability: In Stock
The EGW Remington 783 Short Action scope base brings precision one-piece Picatinny rail mounting to your rifle without the need for gunsmithing. Built for Remington 783 short-action receivers, this mount drops into the factory scope mount holes—no drilling, no tapping—and gives you the flexibility to dial in exact eye relief and swap optics as your hunting or range needs evolve. It's the kind of no-fuss upgrade that keeps you shooting instead of fussing with your rifle.
Machined from extruded 6061 T6 aluminum and precision-engineered to MIL-STD 1913 Picatinny specs (±.002"), this base accepts both Picatinny and Weaver scope rings, so you're not locked into a single ring platform. The full-width cross-slots are gauged for repeatable, accurate mounting, and the lightweight tactical design includes a milled center channel to shed unnecessary weight. Whether you're building a long-range rig, a tack-driving deer rifle, or a competition gun, this mount gives you the rigid foundation that tighter groups demand.
Installation is straightforward: the mount comes with socket head Torx screws and wrench. EGW recommends applying 20 inch-pounds of torque and a drop of blue Loctite during installation to ensure the base stays put through recoil and temperature swings. For shooters who want a solid, one-piece Picatinny solution that respects the integrity of their 783, this is a clean, reliable choice.
| Manufacturer | EGW (Evolution Gun Works) |
| Fit | Remington 783 Short Action |
| Material | 6061 T6 Extruded Aluminum |
| Rail Standard | Picatinny (MIL-STD 1913) |
| Compatible Ring Type | Picatinny or Weaver |
| Tolerance | ±.002" on Picatinny slots |
| MOA | 0 MOA |
| Installation | Factory scope mount holes (no drilling required) |
| Recommended Torque | 20 inch-pounds |
| Fasteners | Socket head Torx screws with wrench included |
Yes. The EGW base is designed to use the factory scope mount holes on the 783 short-action receiver. No drilling, tapping, or permanent modifications are needed.
This Picatinny rail accepts both Picatinny and Weaver rings, giving you flexibility in choosing optics and ring combinations that suit your setup.
EGW recommends 20 inch-pounds of torque and a drop of blue Loctite applied to the fasteners during installation.
The mount includes the one-piece aluminum base, socket head Torx screws, and a Torx wrench for assembly.
SKU: 197556274 • Weight: 0.1oz
Availability: In Stock
The EGW Remington 783 Short Action scope base brings precision one-piece Picatinny rail mounting to your rifle without the need for gunsmithing. Built for Remington 783 short-action receivers, this mount drops into the factory scope mount holes—no drilling, no tapping—and gives you the flexibility to dial in exact eye relief and swap optics as your hunting or range needs evolve. It's the kind of no-fuss upgrade that keeps you shooting instead of fussing with your rifle.
Machined from extruded 6061 T6 aluminum and precision-engineered to MIL-STD 1913 Picatinny specs (±.002"), this base accepts both Picatinny and Weaver scope rings, so you're not locked into a single ring platform. The full-width cross-slots are gauged for repeatable, accurate mounting, and the lightweight tactical design includes a milled center channel to shed unnecessary weight. Whether you're building a long-range rig, a tack-driving deer rifle, or a competition gun, this mount gives you the rigid foundation that tighter groups demand.
Installation is straightforward: the mount comes with socket head Torx screws and wrench. EGW recommends applying 20 inch-pounds of torque and a drop of blue Loctite during installation to ensure the base stays put through recoil and temperature swings. For shooters who want a solid, one-piece Picatinny solution that respects the integrity of their 783, this is a clean, reliable choice.
| Manufacturer | EGW (Evolution Gun Works) |
| Fit | Remington 783 Short Action |
| Material | 6061 T6 Extruded Aluminum |
| Rail Standard | Picatinny (MIL-STD 1913) |
| Compatible Ring Type | Picatinny or Weaver |
| Tolerance | ±.002" on Picatinny slots |
| MOA | 0 MOA |
| Installation | Factory scope mount holes (no drilling required) |
| Recommended Torque | 20 inch-pounds |
| Fasteners | Socket head Torx screws with wrench included |
Yes. The EGW base is designed to use the factory scope mount holes on the 783 short-action receiver. No drilling, tapping, or permanent modifications are needed.
This Picatinny rail accepts both Picatinny and Weaver rings, giving you flexibility in choosing optics and ring combinations that suit your setup.
EGW recommends 20 inch-pounds of torque and a drop of blue Loctite applied to the fasteners during installation.
The mount includes the one-piece aluminum base, socket head Torx screws, and a Torx wrench for assembly.
SKU: 197556274 • Weight: 0.1oz