EGW197556321
Egw Remington 788 Long Action 0 Moa$35.99
Availability: In Stock
The EGW Remington 788 Standard Action scope base gives you a modern Picatinny rail setup on a classic receiver without any gunsmithing. If you own a Remington 788 and want to mount a quality optic—whether you're upgrading an old hunting rifle or setting up a precision .308 for the range—this one-piece base lets you do it using the existing factory holes. No drilling, no tapping, no trips to the gunsmith. It's the straightforward way to get repeatable, adjustable scope mounting on a rifle that deserves better than iron sights.
EGW machines these bases from 6061 T6 extruded aluminum, the same material used in tactical mounts and precision rifles. The Picatinny slots are gauged to MIL-STD 1913 specs (±.002"), so you can trust the fit and switching between quality rings won't cost you zero. The design is lightweight but rigid—the full-width cross-slots give you tons of flexibility to dial in eye relief or swap optics without starting over. Whether you run Picatinny or Weaver rings, you've got options.
Installation is straightforward: the base drops onto the standard action receiver using factory scope-mounting holes. EGW supplies socket head Torx screws and a wrench; they recommend 20 inch-pounds of torque and a small drop of blue Loctite to lock everything down. Once it's on, you can move your scope forward or back along the rail in seconds, so you can dial in the perfect sight picture without tools.
| Brand | EGW (Eric Grauffel Weapons) |
| Fit | Remington 788 Standard Action |
| Mount Style | One-piece Picatinny rail |
| Material | 6061 T6 extruded aluminum |
| Rail Spec | MIL-STD 1913 (±.002") |
| Ring Compatibility | Picatinny or Weaver |
| MOA | 0 MOA (no factory cant) |
| Installation | Uses factory scope-mount holes; no gunsmithing |
| Recommended Torque | 20 inch-pounds |
Yes—it's designed specifically for the Remington 788 Standard Action. It uses the factory scope-mounting holes on the receiver, so no drilling or tapping is needed.
Yes, as long as your rings are Picatinny or Weaver compatible. The rail conforms to MIL-STD 1913 specs, so most modern scope rings will work.
The base comes with socket head Torx screws and a wrench for installation. You'll need your own scope rings and an optic. EGW recommends using blue Loctite and torquing the screws to 20 inch-pounds during setup.
Yes—one of the main advantages of a Picatinny rail is the ability to slide your scope rings along the base to fine-tune eye relief without any tools, as long as your rings have Picatinny slots.
SKU: 197556412 • Weight: 0.13oz
Availability: In Stock
The EGW Remington 788 Standard Action scope base gives you a modern Picatinny rail setup on a classic receiver without any gunsmithing. If you own a Remington 788 and want to mount a quality optic—whether you're upgrading an old hunting rifle or setting up a precision .308 for the range—this one-piece base lets you do it using the existing factory holes. No drilling, no tapping, no trips to the gunsmith. It's the straightforward way to get repeatable, adjustable scope mounting on a rifle that deserves better than iron sights.
EGW machines these bases from 6061 T6 extruded aluminum, the same material used in tactical mounts and precision rifles. The Picatinny slots are gauged to MIL-STD 1913 specs (±.002"), so you can trust the fit and switching between quality rings won't cost you zero. The design is lightweight but rigid—the full-width cross-slots give you tons of flexibility to dial in eye relief or swap optics without starting over. Whether you run Picatinny or Weaver rings, you've got options.
Installation is straightforward: the base drops onto the standard action receiver using factory scope-mounting holes. EGW supplies socket head Torx screws and a wrench; they recommend 20 inch-pounds of torque and a small drop of blue Loctite to lock everything down. Once it's on, you can move your scope forward or back along the rail in seconds, so you can dial in the perfect sight picture without tools.
| Brand | EGW (Eric Grauffel Weapons) |
| Fit | Remington 788 Standard Action |
| Mount Style | One-piece Picatinny rail |
| Material | 6061 T6 extruded aluminum |
| Rail Spec | MIL-STD 1913 (±.002") |
| Ring Compatibility | Picatinny or Weaver |
| MOA | 0 MOA (no factory cant) |
| Installation | Uses factory scope-mount holes; no gunsmithing |
| Recommended Torque | 20 inch-pounds |
Yes—it's designed specifically for the Remington 788 Standard Action. It uses the factory scope-mounting holes on the receiver, so no drilling or tapping is needed.
Yes, as long as your rings are Picatinny or Weaver compatible. The rail conforms to MIL-STD 1913 specs, so most modern scope rings will work.
The base comes with socket head Torx screws and a wrench for installation. You'll need your own scope rings and an optic. EGW recommends using blue Loctite and torquing the screws to 20 inch-pounds during setup.
Yes—one of the main advantages of a Picatinny rail is the ability to slide your scope rings along the base to fine-tune eye relief without any tools, as long as your rings have Picatinny slots.
SKU: 197556412 • Weight: 0.13oz