EGW197556293
Egw Tikka 695 0 Moa$35.99
Loading...
Loading...
Loading...
Availability: In Stock
The EGW Mossberg 695 bolt-action scope base brings modern optics mounting to your shotgun without the hassle of gunsmithing. If you're running a Mossberg 695 and want to add a rifle scope for slug hunting or precision shooting, this one-piece Picatinny rail mounts directly to your receiver's factory holes—no drilling, no tapping, no trips to the gunsmith. It's the fastest way to go from factory irons to a proper glass setup.
Built from 6061 T6 extruded aluminum, this mount is both lightweight and rigid enough to hold zero through recoil. The Picatinny slots are machined to MIL-STD 1913 spec (±.002"), so it'll work with any standard Picatinny or Weaver rings you already own. The full-width cross-slots give you flexibility to dial in your eye relief exactly where you need it, and swapping rings or scopes is genuinely fast—just loosen and slide.
The "Tactical" design includes a milled center channel that shaves weight without sacrificing rigidity. You get socket head Torx screws and a wrench in the box. EGW recommends 20 inch-lbs of torque and a light application of blue Loctite when you install it. Once it's mounted, your 695 is ready to handle slugs or buckshot with the accuracy a quality scope delivers.
| Brand | EGW |
| Firearm Compatibility | Mossberg 695 Bolt Action |
| Mount Type | One-Piece Picatinny Rail |
| Material | 6061 T6 Extruded Aluminum |
| Rail Standard | MIL-STD 1913 Picatinny (±.002") |
| Compatible Rings | Picatinny or Weaver |
| Installation | Drilled to factory scope mount holes |
| Includes | Socket head Torx screws and wrench |
| Recommended Torque | 20 inch-lbs |
Yes. The EGW mount is drilled specifically for the Mossberg 695 bolt-action receiver and uses the factory scope mount holes. No modifications to the gun are needed.
Any standard Picatinny or Weaver rings will work. The Picatinny slots are gauged to MIL-STD 1913 spec, so you have broad compatibility with most quality ring options on the market.
Yes. The mount's full-width cross-slots allow you to slide your rings along the rail to dial in your ideal eye relief, so you can dial in comfort and cheekweld without removing the base.
The mount ships with socket head Torx screws, a hex wrench, and installation instructions. EGW recommends applying a small amount of blue Loctite and torquing the screws to 20 inch-lbs.
SKU: 197556207 • Weight: 0.18oz
Availability: In Stock
The EGW Mossberg 695 bolt-action scope base brings modern optics mounting to your shotgun without the hassle of gunsmithing. If you're running a Mossberg 695 and want to add a rifle scope for slug hunting or precision shooting, this one-piece Picatinny rail mounts directly to your receiver's factory holes—no drilling, no tapping, no trips to the gunsmith. It's the fastest way to go from factory irons to a proper glass setup.
Built from 6061 T6 extruded aluminum, this mount is both lightweight and rigid enough to hold zero through recoil. The Picatinny slots are machined to MIL-STD 1913 spec (±.002"), so it'll work with any standard Picatinny or Weaver rings you already own. The full-width cross-slots give you flexibility to dial in your eye relief exactly where you need it, and swapping rings or scopes is genuinely fast—just loosen and slide.
The "Tactical" design includes a milled center channel that shaves weight without sacrificing rigidity. You get socket head Torx screws and a wrench in the box. EGW recommends 20 inch-lbs of torque and a light application of blue Loctite when you install it. Once it's mounted, your 695 is ready to handle slugs or buckshot with the accuracy a quality scope delivers.
| Brand | EGW |
| Firearm Compatibility | Mossberg 695 Bolt Action |
| Mount Type | One-Piece Picatinny Rail |
| Material | 6061 T6 Extruded Aluminum |
| Rail Standard | MIL-STD 1913 Picatinny (±.002") |
| Compatible Rings | Picatinny or Weaver |
| Installation | Drilled to factory scope mount holes |
| Includes | Socket head Torx screws and wrench |
| Recommended Torque | 20 inch-lbs |
Yes. The EGW mount is drilled specifically for the Mossberg 695 bolt-action receiver and uses the factory scope mount holes. No modifications to the gun are needed.
Any standard Picatinny or Weaver rings will work. The Picatinny slots are gauged to MIL-STD 1913 spec, so you have broad compatibility with most quality ring options on the market.
Yes. The mount's full-width cross-slots allow you to slide your rings along the rail to dial in your ideal eye relief, so you can dial in comfort and cheekweld without removing the base.
The mount ships with socket head Torx screws, a hex wrench, and installation instructions. EGW recommends applying a small amount of blue Loctite and torquing the screws to 20 inch-lbs.
SKU: 197556207 • Weight: 0.18oz