EGW197556142
Egw Browning A-Bolt Long Action 0 Moa$35.99
Availability: In Stock
The EGW Browning X-Bolt Long Action 0 MOA scope base gives you a solid, one-piece Picatinny rail mounted directly to your rifle's receiver—no drilling or tapping required. Built for X-Bolt rifles with long actions, this base lets you dial in your optic's eye relief quickly and gives you real flexibility in scope selection. Whether you're running a hunting rifle or a precision build, a stable scope mount is where accuracy starts, and this base is engineered to deliver.
EGW machines these bases from 7075 T6 extruded aluminum, a material that doesn't flex or shift once you've got your scope rings torqued down. The Picatinny slots are gauged to military specification (MIL-STD 1913) with tolerances held to ±.002 inches—that's tight enough to eliminate play and keep your rings in place shot after shot. The "0 MOA" designation means the base sits at zero degrees (parallel to the bore), giving you a clean foundation for scope alignment.
The base ships with socket head Torx screws and a wrench so you can bolt it to your X-Bolt's factory mounting holes immediately. EGW recommends 20 inch-pounds of torque and a small amount of blue Loctite during installation—straightforward steps that take minutes. Since this is a heavy-duty mount, it sits .100 inches lower than EGW's lightweight bases, keeping your scope closer to the barrel centerline for a more natural sight picture and improved accuracy without adding unnecessary height.
Compatible with both Picatinny and Weaver scope rings, so you're not locked into a single ring brand or style. If you swap scopes or rings later, the base adapts.
| Manufacturer | EGW |
| Firearm Compatibility | Browning X-Bolt Long Action |
| Mount Type | One-piece Picatinny rail base |
| Material | 7075 T6 extruded aluminum |
| Rail Standard | Picatinny (MIL-STD 1913) |
| MOA Setting | 0 MOA (parallel to bore) |
| Ring Compatibility | Picatinny or Weaver rings |
| Height Profile | Heavy-duty (.100" lower than lightweight) |
| Fasteners Included | Socket head Torx screws and wrench |
| Recommended Torque | 20 inch-pounds |
| Installation | Mounts to factory X-Bolt receiver holes |
Yes—this base is designed to mount on Browning X-Bolt long action receivers using the factory scope mount holes. No drilling or tapping required.
This base works with both Picatinny and Weaver scope rings, so you have flexibility in ring choice and can swap them later if needed.
0 MOA means the base is parallel to the bore, providing a neutral mounting platform with no built-in angle. This gives you a clean foundation for scope alignment and lets your rifle's natural zero establish your point of aim.
The base comes with socket head Torx screws, an installation wrench, and instructions. EGW recommends 20 inch-pounds of torque and a small amount of blue Loctite (not included) during assembly.
SKU: 194196355 • Weight: 0.26oz
Availability: In Stock
The EGW Browning X-Bolt Long Action 0 MOA scope base gives you a solid, one-piece Picatinny rail mounted directly to your rifle's receiver—no drilling or tapping required. Built for X-Bolt rifles with long actions, this base lets you dial in your optic's eye relief quickly and gives you real flexibility in scope selection. Whether you're running a hunting rifle or a precision build, a stable scope mount is where accuracy starts, and this base is engineered to deliver.
EGW machines these bases from 7075 T6 extruded aluminum, a material that doesn't flex or shift once you've got your scope rings torqued down. The Picatinny slots are gauged to military specification (MIL-STD 1913) with tolerances held to ±.002 inches—that's tight enough to eliminate play and keep your rings in place shot after shot. The "0 MOA" designation means the base sits at zero degrees (parallel to the bore), giving you a clean foundation for scope alignment.
The base ships with socket head Torx screws and a wrench so you can bolt it to your X-Bolt's factory mounting holes immediately. EGW recommends 20 inch-pounds of torque and a small amount of blue Loctite during installation—straightforward steps that take minutes. Since this is a heavy-duty mount, it sits .100 inches lower than EGW's lightweight bases, keeping your scope closer to the barrel centerline for a more natural sight picture and improved accuracy without adding unnecessary height.
Compatible with both Picatinny and Weaver scope rings, so you're not locked into a single ring brand or style. If you swap scopes or rings later, the base adapts.
| Manufacturer | EGW |
| Firearm Compatibility | Browning X-Bolt Long Action |
| Mount Type | One-piece Picatinny rail base |
| Material | 7075 T6 extruded aluminum |
| Rail Standard | Picatinny (MIL-STD 1913) |
| MOA Setting | 0 MOA (parallel to bore) |
| Ring Compatibility | Picatinny or Weaver rings |
| Height Profile | Heavy-duty (.100" lower than lightweight) |
| Fasteners Included | Socket head Torx screws and wrench |
| Recommended Torque | 20 inch-pounds |
| Installation | Mounts to factory X-Bolt receiver holes |
Yes—this base is designed to mount on Browning X-Bolt long action receivers using the factory scope mount holes. No drilling or tapping required.
This base works with both Picatinny and Weaver scope rings, so you have flexibility in ring choice and can swap them later if needed.
0 MOA means the base is parallel to the bore, providing a neutral mounting platform with no built-in angle. This gives you a clean foundation for scope alignment and lets your rifle's natural zero establish your point of aim.
The base comes with socket head Torx screws, an installation wrench, and instructions. EGW recommends 20 inch-pounds of torque and a small amount of blue Loctite (not included) during assembly.
SKU: 194196355 • Weight: 0.26oz