Breek Arms194201846
Breek Arms BRK555FDE Warhammer Mod2 Mil Spec AR15/M16 Rifles FDE 7075-T6 Aluminum Ambidextrous$49.95
Availability: In Stock
The Breek Arms Warhammer Mod2 is an ambidextrous charging handle engineered for AR-15 and M16 mil spec rifles that puts reliable, fast manipulation at your fingertips—literally. Whether you're running your rifle left- or right-handed, with heavy gloves, a sling, or behind barriers, the reduced-size ambidextrous levers let you rack your rifle confidently without fumbling or snagging. Built from 7075-T6 aluminum and finished in OD Green, it's a practical upgrade that replaces your factory charging handle with zero gunsmithing required.
The Mod2 design goes beyond mere ambidexterity. Breek engineered relief cuts on the stem's top and bottom to direct suppressor gases away from your face, and raised the rear shelf to shield the upper receiver from gas blowback—a meaningful improvement if you shoot suppressed or in tight positions. The 2.40" total width across the latches is slightly wider than stock, but the set-back design prevents interference with large optics mounted to your upper. Textured grooves on the latch handles give you purchase even when gloved, while the sub-one-ounce weight keeps your rifle balanced without adding bulk.
Made in America and finished to mil spec standards, the Warhammer Mod2 doesn't ask you to compromise between affordability and durability. It's the kind of straightforward upgrade that pays dividends on every string of fire—hunting, competition, training, or just keeping your rifle running the way it should.
| Brand | Breek Arms |
| Model | BRK555RGREEN Warhammer Mod2 |
| Finish | OD Green, Type III hard-coat anodized |
| Material | 7075-T6 aluminum (handle and latches) |
| Compatibility | Mil spec AR-15/M16 rifles |
| Latch Width | 2.40" total |
| Weight | Under 1 ounce |
| Installation | Drop-in replacement; no gunsmithing required |
| Operation | Ambidextrous |
Yes. The Mod2 design includes relief cuts on the stem and a raised rear shelf specifically engineered to direct suppressor gases away from your face and better shield the upper receiver. This makes it a solid choice for suppressed shooting.
The set-back latches are designed to clear large optics mounted to your upper receiver, making it a good fit for rifles running magnified optics.
The Warhammer Mod2 is a direct replacement for any mil spec AR-15 or M16 rifle. It's a drop-in part that requires no gunsmithing.
Yes. The ambidextrous design and textured grooves allow for one-handed manipulation, and the reduced-size levers make it easy to operate even while wearing heavy gloves.
SKU: 194201858 • Width: 3.7in • Height: 0.8in • Depth: 8.7in • Weight: 0.09oz
Availability: In Stock
The Breek Arms Warhammer Mod2 is an ambidextrous charging handle engineered for AR-15 and M16 mil spec rifles that puts reliable, fast manipulation at your fingertips—literally. Whether you're running your rifle left- or right-handed, with heavy gloves, a sling, or behind barriers, the reduced-size ambidextrous levers let you rack your rifle confidently without fumbling or snagging. Built from 7075-T6 aluminum and finished in OD Green, it's a practical upgrade that replaces your factory charging handle with zero gunsmithing required.
The Mod2 design goes beyond mere ambidexterity. Breek engineered relief cuts on the stem's top and bottom to direct suppressor gases away from your face, and raised the rear shelf to shield the upper receiver from gas blowback—a meaningful improvement if you shoot suppressed or in tight positions. The 2.40" total width across the latches is slightly wider than stock, but the set-back design prevents interference with large optics mounted to your upper. Textured grooves on the latch handles give you purchase even when gloved, while the sub-one-ounce weight keeps your rifle balanced without adding bulk.
Made in America and finished to mil spec standards, the Warhammer Mod2 doesn't ask you to compromise between affordability and durability. It's the kind of straightforward upgrade that pays dividends on every string of fire—hunting, competition, training, or just keeping your rifle running the way it should.
| Brand | Breek Arms |
| Model | BRK555RGREEN Warhammer Mod2 |
| Finish | OD Green, Type III hard-coat anodized |
| Material | 7075-T6 aluminum (handle and latches) |
| Compatibility | Mil spec AR-15/M16 rifles |
| Latch Width | 2.40" total |
| Weight | Under 1 ounce |
| Installation | Drop-in replacement; no gunsmithing required |
| Operation | Ambidextrous |
Yes. The Mod2 design includes relief cuts on the stem and a raised rear shelf specifically engineered to direct suppressor gases away from your face and better shield the upper receiver. This makes it a solid choice for suppressed shooting.
The set-back latches are designed to clear large optics mounted to your upper receiver, making it a good fit for rifles running magnified optics.
The Warhammer Mod2 is a direct replacement for any mil spec AR-15 or M16 rifle. It's a drop-in part that requires no gunsmithing.
Yes. The ambidextrous design and textured grooves allow for one-handed manipulation, and the reduced-size levers make it easy to operate even while wearing heavy gloves.
SKU: 194201858 • Width: 3.7in • Height: 0.8in • Depth: 8.7in • Weight: 0.09oz