Breek Arms194201846
Breek Arms BRK555FDE Warhammer Mod2 Mil Spec AR15/M16 Rifles FDE 7075-T6 Aluminum Ambidextrous$49.95
Loading...
Loading...
Loading...
Availability: In Stock
The Breek Arms BRK555 Warhammer Mod2 is an ambidextrous charging handle built for shooters who demand a reliable, easy-to-operate upgrade for their mil spec AR15 or M16. Whether you're running gloved hands, working around optics, or shooting suppressed, this handle trades the factory lever for a purpose-built design that prioritizes control and gas management without requiring a gunsmith to install.
Built from 7075-T6 aluminum and finished in Type III hard-coat anodize, the Warhammer Mod2 combines durability with a low-profile footprint. The ambidextrous latches measure 2.40" across—slightly wider than a standard handle but set back far enough to clear modern optics and gear like slings and barriers. The textured grip surfaces cut into each latch give you purchase even with heavy gloves or in adverse conditions, and the reduced-size levers on both sides let you charge the rifle with one hand when you need to.
The Mod2 revision focuses on suppressor-friendly shooting. Relief cuts on the top and bottom of the stem direct excess gas sideways and away from your face, while a raised rear shelf better shields you from gas blowback coming straight back into the receiver. If you spend time behind a suppressed rifle or just want a charging handle that works harder to keep gas out of your face, these refinements make a practical difference. Weighing under an ounce, it's a lightweight swap that doesn't compromise on strength or usability.
| Brand | Breek Arms |
| Model | BRK555 Warhammer Mod2 |
| Compatibility | Mil spec AR15/M16 rifles |
| Material | 7075-T6 aluminum (handle and latches) |
| Finish | Black Type III hard-coat anodized |
| Latch Width | 2.40" across both handles |
| Weight | Under 1 ounce |
| Installation | No gunsmith required |
| Configuration | Ambidextrous |
Yes. The Warhammer Mod2 is designed for all mil spec AR15 and M16 rifles and installs as a direct replacement for the factory charging handle with no gunsmith required.
Yes. The set-back latches are specifically designed to work around modern optics and gear like slings and barriers, minimizing snagging and interference.
Yes. The Mod2 revision includes relief cuts on the stem and a raised rear shelf that work together to divert suppressor gases away from your face, making it especially effective for suppressed rifles.
The textured grooves cut into the latch handles provide a positive grip surface, making it easier to charge your rifle even when wearing heavy gloves or operating in adverse conditions.
SKU: 194201870 • Width: 3.7in • Height: 0.8in • Depth: 8.7in • Weight: 0.09oz
Availability: In Stock
The Breek Arms BRK555 Warhammer Mod2 is an ambidextrous charging handle built for shooters who demand a reliable, easy-to-operate upgrade for their mil spec AR15 or M16. Whether you're running gloved hands, working around optics, or shooting suppressed, this handle trades the factory lever for a purpose-built design that prioritizes control and gas management without requiring a gunsmith to install.
Built from 7075-T6 aluminum and finished in Type III hard-coat anodize, the Warhammer Mod2 combines durability with a low-profile footprint. The ambidextrous latches measure 2.40" across—slightly wider than a standard handle but set back far enough to clear modern optics and gear like slings and barriers. The textured grip surfaces cut into each latch give you purchase even with heavy gloves or in adverse conditions, and the reduced-size levers on both sides let you charge the rifle with one hand when you need to.
The Mod2 revision focuses on suppressor-friendly shooting. Relief cuts on the top and bottom of the stem direct excess gas sideways and away from your face, while a raised rear shelf better shields you from gas blowback coming straight back into the receiver. If you spend time behind a suppressed rifle or just want a charging handle that works harder to keep gas out of your face, these refinements make a practical difference. Weighing under an ounce, it's a lightweight swap that doesn't compromise on strength or usability.
| Brand | Breek Arms |
| Model | BRK555 Warhammer Mod2 |
| Compatibility | Mil spec AR15/M16 rifles |
| Material | 7075-T6 aluminum (handle and latches) |
| Finish | Black Type III hard-coat anodized |
| Latch Width | 2.40" across both handles |
| Weight | Under 1 ounce |
| Installation | No gunsmith required |
| Configuration | Ambidextrous |
Yes. The Warhammer Mod2 is designed for all mil spec AR15 and M16 rifles and installs as a direct replacement for the factory charging handle with no gunsmith required.
Yes. The set-back latches are specifically designed to work around modern optics and gear like slings and barriers, minimizing snagging and interference.
Yes. The Mod2 revision includes relief cuts on the stem and a raised rear shelf that work together to divert suppressor gases away from your face, making it especially effective for suppressed rifles.
The textured grooves cut into the latch handles provide a positive grip surface, making it easier to charge your rifle even when wearing heavy gloves or operating in adverse conditions.
SKU: 194201870 • Width: 3.7in • Height: 0.8in • Depth: 8.7in • Weight: 0.09oz