Breek Arms194201834
Breek Arms BRK522MGRAY Warhammer Mod2 Mil Spec AR15/M16 Rifles Gray Aluminum$49.95
Loading...
Loading...
Loading...
Availability: In Stock
The Breek Arms Warhammer Mod2 is an ambidextrous charging handle built for shooters who want real-world improvements over a factory AR-15 handle. If you run a suppressor, shoot with heavy gloves, or simply want faster, more intuitive rifle manipulation, this FDE aluminum upgrade delivers ergonomic advantages and gas management features that matter downrange. It's mil spec compatible across AR-15 and M16 platforms and requires no gunsmithing to install.
What sets the Mod2 apart is its engineering for suppressed shooting. The relief cuts on the top and bottom of the stem and the increased height of the rear shelf work together to direct gas away from your face—a genuine comfort gain when you're running a can. The wide, oversize ambidextrous release levers let you charge one-handed from either side, and the latches are set back far enough to clear most red dots and magnified optics without interference. Textured grooves cut into the handles give you secure grip even in gloves.
Built from 7075-T6 aluminum throughout (handle and latches), hard-coat anodized in FDE, the Warhammer Mod2 weighs just under an ounce and maintains a low-profile silhouette without compromising function. It's a no-frills, American-made part that does one job well: make your rifle easier and safer to run.
| Brand | Breek Arms |
| Model | Warhammer Mod2 (BRK522FDE) |
| Compatibility | Mil spec AR-15 and M16 rifles |
| Material | 7075-T6 aluminum (handle and latches) |
| Finish | Flat Dark Earth (FDE), Type III hard-coat anodized |
| Total Width | 2.78 inches |
| Weight | Under 1 ounce |
| Configuration | Ambidextrous with oversize release levers |
| Installation | No gunsmithing required |
Yes. The Mod2's set-back latches are designed specifically to clear large optics, including most red dot and magnified scopes. There's plenty of clearance to charge the rifle without interference.
The Mod2 is engineered to help manage suppressor gas. Relief cuts on the stem and an increased height at the rear shelf work to direct excess gas to the side and away from your face, improving the shooting experience when running a suppressor.
Yes. The oversize ambidextrous release levers and textured grooves are specifically designed for secure manipulation even when wearing insulated or tactical gloves.
Yes. The Warhammer Mod2 is a mil spec-compatible replacement that requires no gunsmithing or modifications to your AR-15 or M16.
SKU: 194201843 • Width: 3.7in • Height: 0.8in • Depth: 8.7in • Weight: 0.095oz
Availability: In Stock
The Breek Arms Warhammer Mod2 is an ambidextrous charging handle built for shooters who want real-world improvements over a factory AR-15 handle. If you run a suppressor, shoot with heavy gloves, or simply want faster, more intuitive rifle manipulation, this FDE aluminum upgrade delivers ergonomic advantages and gas management features that matter downrange. It's mil spec compatible across AR-15 and M16 platforms and requires no gunsmithing to install.
What sets the Mod2 apart is its engineering for suppressed shooting. The relief cuts on the top and bottom of the stem and the increased height of the rear shelf work together to direct gas away from your face—a genuine comfort gain when you're running a can. The wide, oversize ambidextrous release levers let you charge one-handed from either side, and the latches are set back far enough to clear most red dots and magnified optics without interference. Textured grooves cut into the handles give you secure grip even in gloves.
Built from 7075-T6 aluminum throughout (handle and latches), hard-coat anodized in FDE, the Warhammer Mod2 weighs just under an ounce and maintains a low-profile silhouette without compromising function. It's a no-frills, American-made part that does one job well: make your rifle easier and safer to run.
| Brand | Breek Arms |
| Model | Warhammer Mod2 (BRK522FDE) |
| Compatibility | Mil spec AR-15 and M16 rifles |
| Material | 7075-T6 aluminum (handle and latches) |
| Finish | Flat Dark Earth (FDE), Type III hard-coat anodized |
| Total Width | 2.78 inches |
| Weight | Under 1 ounce |
| Configuration | Ambidextrous with oversize release levers |
| Installation | No gunsmithing required |
Yes. The Mod2's set-back latches are designed specifically to clear large optics, including most red dot and magnified scopes. There's plenty of clearance to charge the rifle without interference.
The Mod2 is engineered to help manage suppressor gas. Relief cuts on the stem and an increased height at the rear shelf work to direct excess gas to the side and away from your face, improving the shooting experience when running a suppressor.
Yes. The oversize ambidextrous release levers and textured grooves are specifically designed for secure manipulation even when wearing insulated or tactical gloves.
Yes. The Warhammer Mod2 is a mil spec-compatible replacement that requires no gunsmithing or modifications to your AR-15 or M16.
SKU: 194201843 • Width: 3.7in • Height: 0.8in • Depth: 8.7in • Weight: 0.095oz