Breek Arms194201846
Breek Arms BRK555FDE Warhammer Mod2 Mil Spec AR15/M16 Rifles FDE 7075-T6 Aluminum Ambidextrous$49.95
Loading...
Loading...
Loading...
Availability: In Stock
The Breek Arms Warhammer Mod2 is a mil spec ambidextrous charging handle built for shooters who want a faster, more reliable charge on their AR-15 or M16 without the fumble. Made from 7075-T6 aluminum and finished with Type III hard-coat anodize in gray, this handle replaces your factory charging handle with one you can grab from either side—fast and confident, whether you're running gloves, a sling, or shooting around barriers. The reduced-size ambidextrous release levers keep everything compact at 2.4" total width, so you won't snag on optics, gear, or suppressor tubes.
The Mod2 design targets a real problem: gasses that blow back toward your face, especially when running a suppressor. Breek engineered relief cuts into the top and bottom of the stem to redirect gas sideways and away from you, while a taller rear shelf better shields the back of your upper receiver. It's a small engineering detail with a noticeable payoff—cleaner shooting and less gas in your eyes. The textured grooves on the latch handles give you secure purchase even with cold, bulky gloves, and the set-back latches won't interfere with large optics mounted farther forward. Setup is straightforward—no gunsmith required, just swap it for your existing handle.
At under 1 ounce, it doesn't add weight where it matters, and it's built to last. American-made from materials that won't cheap out on you, the Warhammer Mod2 is a no-nonsense upgrade that turns your AR charging into a smooth, one-handed operation. Whether you're running suppressed precision fire, three-gun, or hunting, ambidextrous control means faster transitions and less wasted motion.
| Brand | Breek Arms |
| Model | BRK555MGRAY Warhammer Mod2 |
| Material | 7075-T6 aluminum |
| Finish | Type III hard-coat anodize, gray |
| Compatibility | Mil spec AR-15, M16 |
| Latch Width | 2.40" total |
| Weight | Under 1 ounce |
| Installation | Drop-in replacement—no gunsmith required |
Yes. The set-back latch design keeps the handle slim and won't interfere with large optics mounted farther forward on your rail. The total width across the latches is 2.4 inches.
Yes. The Mod2 design includes relief cuts on the top and bottom of the stem to direct gases sideways and away from your face, plus a taller rear shelf that better covers the back of your upper receiver. These features work together to reduce gas blowback when shooting suppressed.
Yes. The ambidextrous design and reduced-size release levers on both sides allow for one-handed manipulation and fast charging from either side of the rifle.
No. The Warhammer Mod2 is a drop-in replacement for your factory charging handle—no gunsmith required. It's a simple swap.
SKU: 194201824 • Width: 3.7in • Height: 0.8in • Depth: 8.7in • Weight: 0.095oz
Availability: In Stock
The Breek Arms Warhammer Mod2 is a mil spec ambidextrous charging handle built for shooters who want a faster, more reliable charge on their AR-15 or M16 without the fumble. Made from 7075-T6 aluminum and finished with Type III hard-coat anodize in gray, this handle replaces your factory charging handle with one you can grab from either side—fast and confident, whether you're running gloves, a sling, or shooting around barriers. The reduced-size ambidextrous release levers keep everything compact at 2.4" total width, so you won't snag on optics, gear, or suppressor tubes.
The Mod2 design targets a real problem: gasses that blow back toward your face, especially when running a suppressor. Breek engineered relief cuts into the top and bottom of the stem to redirect gas sideways and away from you, while a taller rear shelf better shields the back of your upper receiver. It's a small engineering detail with a noticeable payoff—cleaner shooting and less gas in your eyes. The textured grooves on the latch handles give you secure purchase even with cold, bulky gloves, and the set-back latches won't interfere with large optics mounted farther forward. Setup is straightforward—no gunsmith required, just swap it for your existing handle.
At under 1 ounce, it doesn't add weight where it matters, and it's built to last. American-made from materials that won't cheap out on you, the Warhammer Mod2 is a no-nonsense upgrade that turns your AR charging into a smooth, one-handed operation. Whether you're running suppressed precision fire, three-gun, or hunting, ambidextrous control means faster transitions and less wasted motion.
| Brand | Breek Arms |
| Model | BRK555MGRAY Warhammer Mod2 |
| Material | 7075-T6 aluminum |
| Finish | Type III hard-coat anodize, gray |
| Compatibility | Mil spec AR-15, M16 |
| Latch Width | 2.40" total |
| Weight | Under 1 ounce |
| Installation | Drop-in replacement—no gunsmith required |
Yes. The set-back latch design keeps the handle slim and won't interfere with large optics mounted farther forward on your rail. The total width across the latches is 2.4 inches.
Yes. The Mod2 design includes relief cuts on the top and bottom of the stem to direct gases sideways and away from your face, plus a taller rear shelf that better covers the back of your upper receiver. These features work together to reduce gas blowback when shooting suppressed.
Yes. The ambidextrous design and reduced-size release levers on both sides allow for one-handed manipulation and fast charging from either side of the rifle.
No. The Warhammer Mod2 is a drop-in replacement for your factory charging handle—no gunsmith required. It's a simple swap.
SKU: 194201824 • Width: 3.7in • Height: 0.8in • Depth: 8.7in • Weight: 0.095oz