Breek Arms194201843
Breek Arms BRK522FDE Warhammer Mod2 Mil Spec AR15/M16 Rifles FDE Aluminum$49.95
Availability: In Stock
The Breek Arms BRK522 Warhammer Mod2 is an ambidextrous charging handle built for shooters who demand better ergonomics and gas management on their mil spec AR15 and M16 rifles. Whether you're running a rifle with optics, suppressor, or both, this mil spec charging handle replaces your factory handle with a design that prioritizes one-handed operation, gloved manipulation, and real-world shooter comfort—especially in suppressed fire.
The Mod2 engineering reflects lessons learned from suppressor use. Relief cuts on the top and bottom of the stem redirect gases away from your face, while an increased rear shelf better shields the upper receiver from blowback. It's a thoughtful upgrade for anyone running cans or pushing through high round counts where shooter fatigue and gas intrusion matter. The wide, oversize ambidextrous levers give you positive purchase from either side, and the set-back latches clear large optics without compromise. Textured grooves cut into both handles keep the handle secure even with heavy gloves or wet hands.
Built from 7075-T6 aluminum throughout—both body and latches—and finished in Type III hard-coat anodize for durability that matches the demands of your platform. The whole assembly weighs under an ounce and requires no gunsmithing; it's a drop-in swap for any mil spec AR. Made in America, the Warhammer Mod2 is an affordable, functional upgrade that works as hard as your rifle does.
| Brand | Breek Arms |
| Model | BRK522 Warhammer Mod2 |
| Compatibility | Mil spec AR15/M16 rifles |
| Material | 7075-T6 aluminum (body and latches) |
| Finish | Type III hard-coat anodize, black |
| Handle Width | 2.78" across levers |
| Weight | Under 1 ounce |
| Installation | Drop-in replacement; no gunsmithing |
| Origin | Made in America |
Yes. The set-back latches are designed to clear large optics and magnifier systems without interference, making it an ideal upgrade if you're running bulkier glass on your upper receiver.
That's exactly what the Warhammer Mod2 was built for. The oversize ambidextrous levers and textured grip grooves provide positive purchase whether you're shooting bare-handed, gloved, or in wet conditions, and you can charge it one-handed from either side.
Yes. The Mod2 design includes relief cuts on the top and bottom of the stem and a higher rear shelf specifically engineered to direct suppressor gases away from your face and reduce blowback into the action—a meaningful improvement when running cans.
No. The Warhammer Mod2 is a drop-in replacement for any mil spec charging handle. It requires no modifications or special tools to install.
SKU: 194201805 • Width: 3.7in • Height: 0.7in • Depth: 8.7in • Weight: 0.095oz
Availability: In Stock
The Breek Arms BRK522 Warhammer Mod2 is an ambidextrous charging handle built for shooters who demand better ergonomics and gas management on their mil spec AR15 and M16 rifles. Whether you're running a rifle with optics, suppressor, or both, this mil spec charging handle replaces your factory handle with a design that prioritizes one-handed operation, gloved manipulation, and real-world shooter comfort—especially in suppressed fire.
The Mod2 engineering reflects lessons learned from suppressor use. Relief cuts on the top and bottom of the stem redirect gases away from your face, while an increased rear shelf better shields the upper receiver from blowback. It's a thoughtful upgrade for anyone running cans or pushing through high round counts where shooter fatigue and gas intrusion matter. The wide, oversize ambidextrous levers give you positive purchase from either side, and the set-back latches clear large optics without compromise. Textured grooves cut into both handles keep the handle secure even with heavy gloves or wet hands.
Built from 7075-T6 aluminum throughout—both body and latches—and finished in Type III hard-coat anodize for durability that matches the demands of your platform. The whole assembly weighs under an ounce and requires no gunsmithing; it's a drop-in swap for any mil spec AR. Made in America, the Warhammer Mod2 is an affordable, functional upgrade that works as hard as your rifle does.
| Brand | Breek Arms |
| Model | BRK522 Warhammer Mod2 |
| Compatibility | Mil spec AR15/M16 rifles |
| Material | 7075-T6 aluminum (body and latches) |
| Finish | Type III hard-coat anodize, black |
| Handle Width | 2.78" across levers |
| Weight | Under 1 ounce |
| Installation | Drop-in replacement; no gunsmithing |
| Origin | Made in America |
Yes. The set-back latches are designed to clear large optics and magnifier systems without interference, making it an ideal upgrade if you're running bulkier glass on your upper receiver.
That's exactly what the Warhammer Mod2 was built for. The oversize ambidextrous levers and textured grip grooves provide positive purchase whether you're shooting bare-handed, gloved, or in wet conditions, and you can charge it one-handed from either side.
Yes. The Mod2 design includes relief cuts on the top and bottom of the stem and a higher rear shelf specifically engineered to direct suppressor gases away from your face and reduce blowback into the action—a meaningful improvement when running cans.
No. The Warhammer Mod2 is a drop-in replacement for any mil spec charging handle. It requires no modifications or special tools to install.
SKU: 194201805 • Width: 3.7in • Height: 0.7in • Depth: 8.7in • Weight: 0.095oz