Area 419167525051
Area 419 Zero M-Series Sizing Dies 6.5 Prc W/ Shell Holder$531.25
Loading...
Loading...
Loading...
Availability: In Stock
The Area 419 Zero M-Series sizing die for 7mm PRC brings match-grade reloading precision to your bench without the learning curve. Area 419 engineered this sizing die from the ground up with both experienced handloaders and newcomers in mind—starting with what works well in other dies, then eliminating what doesn't. The result is a full-length neck-to-extractor sizing solution that handles the entire case in one smooth operation, letting you produce ammunition that chambers cleanly and fires consistently without fighting a sticky bolt.
What sets the M-Series apart is the micrometer-adjustable headspace and shoulder bump system. Instead of guessing or making tiny adjustments with shims, you dial in your exact setup and repeat it shot after shot. The precision-ground expander mandrel (the die ships with a .002" neck tension mandrel, with additional options available separately) ensures consistent case neck sizing. A hydraulic shoulder pressure relief prevents over-working the brass, spring ejection tosses out spent primers cleanly, and the reamer is cut to such tight tolerances that you get a true size—no sticky bolt issues on reload two or three.
This is a 1¼" die, so it requires a hybrid or 1¼" turret on your Zero press or compatible equipment—it cannot be used in a 7/8" turret or standard 7/8" press. Area 419 includes a ZERO die ring, a spare decapping pin, and the install and removal tools you need to get running. Every die is made in America and built to work as part of the larger reloading system—press, die, brass, and rifle all in harmony.
| Caliber | 7mm PRC |
| Die Type | Full-Length Sizing Die |
| Die Size | 1¼" (requires 1¼" or hybrid turret) |
| Adjustment | Micrometer headspace/shoulder bump |
| Expander Mandrel (Included) | .002" neck tension |
| Includes | ZERO die ring, spare decapping pin, installation/removal tools, shell holder |
| Made In | USA |
No. The Area 419 Zero M-Series is a 1¼" die and requires a 1¼" or hybrid turret. It is not compatible with 7/8" turrets or standard 7/8" presses.
The die ships with a .002" neck tension expander mandrel. Area 419 offers additional mandrel increments available separately through their mandrel kit if you need a different neck tension specification.
Yes. The steel decapping pin is replaceable, and a spare is included with the die. This makes maintenance and upkeep straightforward over time.
The die comes with a ZERO die ring, a spare decapping pin, the necessary installation and removal tools, and a shell holder for 7mm PRC.
SKU: 167524134 • Width: 5.5in • Height: 2.75in • Depth: 9.7in • Weight: 3.249oz
Availability: In Stock
The Area 419 Zero M-Series sizing die for 7mm PRC brings match-grade reloading precision to your bench without the learning curve. Area 419 engineered this sizing die from the ground up with both experienced handloaders and newcomers in mind—starting with what works well in other dies, then eliminating what doesn't. The result is a full-length neck-to-extractor sizing solution that handles the entire case in one smooth operation, letting you produce ammunition that chambers cleanly and fires consistently without fighting a sticky bolt.
What sets the M-Series apart is the micrometer-adjustable headspace and shoulder bump system. Instead of guessing or making tiny adjustments with shims, you dial in your exact setup and repeat it shot after shot. The precision-ground expander mandrel (the die ships with a .002" neck tension mandrel, with additional options available separately) ensures consistent case neck sizing. A hydraulic shoulder pressure relief prevents over-working the brass, spring ejection tosses out spent primers cleanly, and the reamer is cut to such tight tolerances that you get a true size—no sticky bolt issues on reload two or three.
This is a 1¼" die, so it requires a hybrid or 1¼" turret on your Zero press or compatible equipment—it cannot be used in a 7/8" turret or standard 7/8" press. Area 419 includes a ZERO die ring, a spare decapping pin, and the install and removal tools you need to get running. Every die is made in America and built to work as part of the larger reloading system—press, die, brass, and rifle all in harmony.
| Caliber | 7mm PRC |
| Die Type | Full-Length Sizing Die |
| Die Size | 1¼" (requires 1¼" or hybrid turret) |
| Adjustment | Micrometer headspace/shoulder bump |
| Expander Mandrel (Included) | .002" neck tension |
| Includes | ZERO die ring, spare decapping pin, installation/removal tools, shell holder |
| Made In | USA |
No. The Area 419 Zero M-Series is a 1¼" die and requires a 1¼" or hybrid turret. It is not compatible with 7/8" turrets or standard 7/8" presses.
The die ships with a .002" neck tension expander mandrel. Area 419 offers additional mandrel increments available separately through their mandrel kit if you need a different neck tension specification.
Yes. The steel decapping pin is replaceable, and a spare is included with the die. This makes maintenance and upkeep straightforward over time.
The die comes with a ZERO die ring, a spare decapping pin, the necessary installation and removal tools, and a shell holder for 7mm PRC.
SKU: 167524134 • Width: 5.5in • Height: 2.75in • Depth: 9.7in • Weight: 3.249oz