Area 419167525046
Area 419 Zero M-Series Sizing Dies .308 Win W/ Shell Holder$500.00
Availability: In Stock
The Area 419 Zero M-Series Sizing Die for 6.5x47 is purpose-built for reloaders who demand precision without the learning curve. Unlike generic sizing dies, Area 419 engineered this die specifically around their Zero press ecosystem—meaning the die, press, brass, and chamber work together as an integrated system. If you're chasing match-grade accuracy or just want straightforward, repeatable brass prep, this die eliminates the trial-and-error that plagues standard equipment.
What makes this 6.5x47 sizing die stand out is the micrometer-adjustable headspace and shoulder bump control. You dial in exactly how much sizing you need for your rifle and brass combination—no guessing, no sticky bolt issues after the second firing. The precision-ground expander mandrel ships set at .002" neck tension, and you can add different increments with the optional Area 419 Mandrel Kit to fine-tune neck fit for your loads. The full-length neck-to-extractor sizing geometry means consistent case length and runout.
Built-in hydraulic shoulder pressure relief protects your brass from over-working, while the reamer is cut to exacting dimensions to achieve true sizing without the resistance that wears you out at the press. Spring ejection ejects spent primers automatically, the decap pin is replaceable steel (and a spare ships with the die), and you get the necessary install and removal tools plus an Area 419 Zero Die Ring. Everything here is 100% made in America.
Critical Compatibility Note: This die requires a 1-1/4" Hybrid or 1-1/4" turret on your Zero press—it will NOT work with a 7/8" turret. The die also requires the larger-diameter M-Series shell holder (included); standard shell holders are incompatible. If you don't have a Zero M-Series shell holder or your press uses a 7/8" station, this die is not the right fit.
| Caliber | 6.5x47 |
| Die Size | 1-1/4" |
| Compatible Press | Area 419 Zero with 1-1/4" Hybrid or 1-1/4" Turret |
| Shell Holder Required | Area 419 Zero M-Series Shell Holder (included) |
| Incompatible With | 7/8" turrets, standard shell holders, 7/8" presses |
| Default Neck Tension | .002" |
| Included Accessories | Area 419 Zero Die Ring, spare decapping pin, installation/removal tools |
| Country of Manufacture | USA |
Only if your Zero has a 1-1/4" Hybrid or 1-1/4" turret. If your press uses a 7/8" turret, this die will not fit. Check your press configuration before ordering.
No. The Area 419 Zero M-Series Sizing Die requires the larger-diameter M-Series shell holder due to its design. Standard shell holders are incompatible. The M-Series shell holder is included with this die.
The die ships with a precision-ground expander mandrel set at .002" neck tension. If you need different neck tension increments, you can purchase the separate Area 419 Mandrel Kit to customize fit for your specific loads and components.
The die includes the Area 419 Zero Die Ring, a spare decapping pin, the necessary installation and removal tools, and the M-Series shell holder. You'll have everything needed to install and begin sizing.
SKU: 167525049 • Width: 6in • Height: 3in • Depth: 10in • Weight: 3.3oz
Availability: In Stock
The Area 419 Zero M-Series Sizing Die for 6.5x47 is purpose-built for reloaders who demand precision without the learning curve. Unlike generic sizing dies, Area 419 engineered this die specifically around their Zero press ecosystem—meaning the die, press, brass, and chamber work together as an integrated system. If you're chasing match-grade accuracy or just want straightforward, repeatable brass prep, this die eliminates the trial-and-error that plagues standard equipment.
What makes this 6.5x47 sizing die stand out is the micrometer-adjustable headspace and shoulder bump control. You dial in exactly how much sizing you need for your rifle and brass combination—no guessing, no sticky bolt issues after the second firing. The precision-ground expander mandrel ships set at .002" neck tension, and you can add different increments with the optional Area 419 Mandrel Kit to fine-tune neck fit for your loads. The full-length neck-to-extractor sizing geometry means consistent case length and runout.
Built-in hydraulic shoulder pressure relief protects your brass from over-working, while the reamer is cut to exacting dimensions to achieve true sizing without the resistance that wears you out at the press. Spring ejection ejects spent primers automatically, the decap pin is replaceable steel (and a spare ships with the die), and you get the necessary install and removal tools plus an Area 419 Zero Die Ring. Everything here is 100% made in America.
Critical Compatibility Note: This die requires a 1-1/4" Hybrid or 1-1/4" turret on your Zero press—it will NOT work with a 7/8" turret. The die also requires the larger-diameter M-Series shell holder (included); standard shell holders are incompatible. If you don't have a Zero M-Series shell holder or your press uses a 7/8" station, this die is not the right fit.
| Caliber | 6.5x47 |
| Die Size | 1-1/4" |
| Compatible Press | Area 419 Zero with 1-1/4" Hybrid or 1-1/4" Turret |
| Shell Holder Required | Area 419 Zero M-Series Shell Holder (included) |
| Incompatible With | 7/8" turrets, standard shell holders, 7/8" presses |
| Default Neck Tension | .002" |
| Included Accessories | Area 419 Zero Die Ring, spare decapping pin, installation/removal tools |
| Country of Manufacture | USA |
Only if your Zero has a 1-1/4" Hybrid or 1-1/4" turret. If your press uses a 7/8" turret, this die will not fit. Check your press configuration before ordering.
No. The Area 419 Zero M-Series Sizing Die requires the larger-diameter M-Series shell holder due to its design. Standard shell holders are incompatible. The M-Series shell holder is included with this die.
The die ships with a precision-ground expander mandrel set at .002" neck tension. If you need different neck tension increments, you can purchase the separate Area 419 Mandrel Kit to customize fit for your specific loads and components.
The die includes the Area 419 Zero Die Ring, a spare decapping pin, the necessary installation and removal tools, and the M-Series shell holder. You'll have everything needed to install and begin sizing.
SKU: 167525049 • Width: 6in • Height: 3in • Depth: 10in • Weight: 3.3oz