Area 419167523242
Area 419 Zero M-Series Sizing Dies .22 Cm W/ Shell Holder$500.00
Availability: In Stock
The Area 419 Zero M-Series Sizing Die for 6 CM is engineered specifically for reloaders who demand precision without the learning curve. Built to work seamlessly within the Area 419 ecosystem—press, die, brass, and rifle all designed with each other in mind—this sizing die bridges the gap between match-grade accuracy and user-friendly operation. Whether you're a seasoned handloader chasing extreme precision or newer to reloading, this die handles the critical first step of the sizing process with repeatability that lets your rifle and ammunition do the talking.
What sets the M-Series apart is the engineering philosophy behind it. Area 419 didn't just make another sizing die; they built one informed by years of testing, real-world feedback from ZERO press users, and a clear understanding of what works—and what doesn't—in the loading room. The result is a die that produces consistently sized brass without the sticky bolt issues that plague inferior sizing, while the micrometer-adjustable headspace and shoulder bump puts fine-tuning in your hands without guesswork.
Critical compatibility note: this die requires a 1-1/4″ turret (Hybrid or standard 1-1/4″ turret on the ZERO press or compatible equipment). It is NOT compatible with 7/8″ turrets or presses. You must also use an Area 419 ZERO M-Series shell holder—standard shell holders will not work with this die. The included die ring, spare decapping pin, and installation tools get you up and running immediately.
| Caliber | 6 CM |
| Turret Size Required | 1-1/4″ (Hybrid or standard 1-1/4″ turret) |
| Compatible Press | Area 419 ZERO or other 1-1/4″ compatible presses |
| Shell Holder Required | Area 419 ZERO M-Series shell holder (included) |
| Neck Tension Mandrel (Standard) | .002″ |
| Included Components | Die, ZERO die ring, spare decapping pin, installation/removal tools |
| Decapping Pin | Replaceable steel |
| Country of Origin | USA |
The Area 419 Zero M-Series Sizing Die for 6 CM requires a 1-1/4″ turret—either a Hybrid or standard 1-1/4″ turret on the ZERO press or compatible equipment with the same turret size. It cannot be used with 7/8″ turrets or 7/8″ presses. Check your press turret size before ordering.
You must use an Area 419 ZERO M-Series shell holder—standard shell holders are not compatible with this die because the M-Series requires a larger diameter shell holder rim. The shell holder is included with this die set.
The die ships standard with a .002″ neck tension mandrel. Additional mandrel increments are available separately through the Area 419 Mandrel Kit if you want to adjust neck tension for different applications.
The die comes with an Area 419 ZERO die ring, one spare decapping pin, and all necessary installation and removal tools so you can get set up and make adjustments without additional purchases.
SKU: 167525045 • Width: 6in • Height: 3in • Depth: 10in • Weight: 3.29oz
Availability: In Stock
The Area 419 Zero M-Series Sizing Die for 6 CM is engineered specifically for reloaders who demand precision without the learning curve. Built to work seamlessly within the Area 419 ecosystem—press, die, brass, and rifle all designed with each other in mind—this sizing die bridges the gap between match-grade accuracy and user-friendly operation. Whether you're a seasoned handloader chasing extreme precision or newer to reloading, this die handles the critical first step of the sizing process with repeatability that lets your rifle and ammunition do the talking.
What sets the M-Series apart is the engineering philosophy behind it. Area 419 didn't just make another sizing die; they built one informed by years of testing, real-world feedback from ZERO press users, and a clear understanding of what works—and what doesn't—in the loading room. The result is a die that produces consistently sized brass without the sticky bolt issues that plague inferior sizing, while the micrometer-adjustable headspace and shoulder bump puts fine-tuning in your hands without guesswork.
Critical compatibility note: this die requires a 1-1/4″ turret (Hybrid or standard 1-1/4″ turret on the ZERO press or compatible equipment). It is NOT compatible with 7/8″ turrets or presses. You must also use an Area 419 ZERO M-Series shell holder—standard shell holders will not work with this die. The included die ring, spare decapping pin, and installation tools get you up and running immediately.
| Caliber | 6 CM |
| Turret Size Required | 1-1/4″ (Hybrid or standard 1-1/4″ turret) |
| Compatible Press | Area 419 ZERO or other 1-1/4″ compatible presses |
| Shell Holder Required | Area 419 ZERO M-Series shell holder (included) |
| Neck Tension Mandrel (Standard) | .002″ |
| Included Components | Die, ZERO die ring, spare decapping pin, installation/removal tools |
| Decapping Pin | Replaceable steel |
| Country of Origin | USA |
The Area 419 Zero M-Series Sizing Die for 6 CM requires a 1-1/4″ turret—either a Hybrid or standard 1-1/4″ turret on the ZERO press or compatible equipment with the same turret size. It cannot be used with 7/8″ turrets or 7/8″ presses. Check your press turret size before ordering.
You must use an Area 419 ZERO M-Series shell holder—standard shell holders are not compatible with this die because the M-Series requires a larger diameter shell holder rim. The shell holder is included with this die set.
The die ships standard with a .002″ neck tension mandrel. Additional mandrel increments are available separately through the Area 419 Mandrel Kit if you want to adjust neck tension for different applications.
The die comes with an Area 419 ZERO die ring, one spare decapping pin, and all necessary installation and removal tools so you can get set up and make adjustments without additional purchases.
SKU: 167525045 • Width: 6in • Height: 3in • Depth: 10in • Weight: 3.29oz