Availability: In Stock
The TacFire MZ1020SS stainless steel linear compensator is purpose-built for 5.56x45mm NATO AR-15 platforms. Linear compensators redirect muzzle blast forward and to the sides rather than upward, which helps reduce felt recoil and muzzle rise while keeping your sight picture clearer on follow-up shots. The stainless steel construction resists corrosion, making it a solid choice for shooters who want durability without the extra expense of premium alternatives. This is an uncomplicated, effective muzzle device for serious shooters running suppressed setups, tactical courses, or high-round-count range days.
Installation is straightforward if you're comfortable with basic AR-15 work. The 1/2"-28 TPI threads match the standard muzzle diameter on most 5.56 uppers. At 2.05 inches in overall length and 0.87 inches in diameter, it's compact enough to integrate with most handguard designs without fouling or looking oversized. Whether you're tuning a duty rifle, a competition gun, or just want better control behind the gun, a linear compensator that doesn't break the bank is a smart upgrade.
Verify your barrel's muzzle threading before ordering—5.56 AR-15 barrels come in 1/2"-28 or 5/8"-24, and this compensator fits the former. If you're running an adjustable gas block, a linear comp pairs well with that setup for fine-tuning reliability and recoil management across different ammunition and suppressor configurations.
| Brand | TacFire |
| Model | MZ1020SS |
| Caliber | 5.56x45mm NATO |
| Thread Pitch | 1/2"-28 TPI |
| Overall Length | 2.05" |
| Diameter | 0.87" |
| Material | Stainless Steel |
| Type | Linear Compensator |
The MZ1020SS uses standard 1/2"-28 TPI threads, which are factory standard on most 5.56 NATO AR-15 barrels. Confirm your barrel's muzzle threading before purchase—some barrels ship with 5/8"-24 threads instead.
A linear design redirects propellant gases forward and laterally (not upward) as they exit the muzzle. This reduces felt recoil and muzzle rise, keeping your sights on target longer between shots. You'll experience some forward blast and side concussion, which is the trade-off for improved sight picture recovery.
Yes. Many shooters pair linear compensators with suppressors to fine-tune recoil impulse and reliability. A linear comp's forward-venting design can work well in suppressed configurations, especially when paired with an adjustable gas block.
Stainless resists corrosion without requiring frequent cleaning or oils, making it a good pick for humid climates or field use. Chrome-moly is harder and can offer slightly better durability under extreme conditions, but stainless is plenty tough for typical shooting and costs less.
SKU: 115788320 • Width: 3.8in • Height: 1in • Depth: 4.2in • Weight: 0.24oz
Availability: In Stock
The TacFire MZ1020SS stainless steel linear compensator is purpose-built for 5.56x45mm NATO AR-15 platforms. Linear compensators redirect muzzle blast forward and to the sides rather than upward, which helps reduce felt recoil and muzzle rise while keeping your sight picture clearer on follow-up shots. The stainless steel construction resists corrosion, making it a solid choice for shooters who want durability without the extra expense of premium alternatives. This is an uncomplicated, effective muzzle device for serious shooters running suppressed setups, tactical courses, or high-round-count range days.
Installation is straightforward if you're comfortable with basic AR-15 work. The 1/2"-28 TPI threads match the standard muzzle diameter on most 5.56 uppers. At 2.05 inches in overall length and 0.87 inches in diameter, it's compact enough to integrate with most handguard designs without fouling or looking oversized. Whether you're tuning a duty rifle, a competition gun, or just want better control behind the gun, a linear compensator that doesn't break the bank is a smart upgrade.
Verify your barrel's muzzle threading before ordering—5.56 AR-15 barrels come in 1/2"-28 or 5/8"-24, and this compensator fits the former. If you're running an adjustable gas block, a linear comp pairs well with that setup for fine-tuning reliability and recoil management across different ammunition and suppressor configurations.
| Brand | TacFire |
| Model | MZ1020SS |
| Caliber | 5.56x45mm NATO |
| Thread Pitch | 1/2"-28 TPI |
| Overall Length | 2.05" |
| Diameter | 0.87" |
| Material | Stainless Steel |
| Type | Linear Compensator |
The MZ1020SS uses standard 1/2"-28 TPI threads, which are factory standard on most 5.56 NATO AR-15 barrels. Confirm your barrel's muzzle threading before purchase—some barrels ship with 5/8"-24 threads instead.
A linear design redirects propellant gases forward and laterally (not upward) as they exit the muzzle. This reduces felt recoil and muzzle rise, keeping your sights on target longer between shots. You'll experience some forward blast and side concussion, which is the trade-off for improved sight picture recovery.
Yes. Many shooters pair linear compensators with suppressors to fine-tune recoil impulse and reliability. A linear comp's forward-venting design can work well in suppressed configurations, especially when paired with an adjustable gas block.
Stainless resists corrosion without requiring frequent cleaning or oils, making it a good pick for humid climates or field use. Chrome-moly is harder and can offer slightly better durability under extreme conditions, but stainless is plenty tough for typical shooting and costs less.
SKU: 115788320 • Width: 3.8in • Height: 1in • Depth: 4.2in • Weight: 0.24oz