Availability: In Stock
The TacFire MZ1020 linear compensator is a steel muzzle device designed for 5.56x45mm NATO AR-15 rifles where shooter comfort and noise management matter. Built from black nitride steel and threaded 1/2"-28, it redirects sound and concussion forward and downrange rather than back toward the shooter, making it particularly useful in training environments, tactical scenarios, or anywhere minimizing side blast is a priority. The design uses six vent ports to channel gases efficiently without adding unnecessary length to your gun.
Linear compensators work differently than traditional brakes: instead of pushing muzzle rise straight up, they funnel concussion forward. If you shoot in populated ranges, train with others nearby, or run drills where your shot placement matters more than recoil control, this approach keeps discomfort off your shoulder and away from your squad. At 2.26 inches overall length and 0.87 inches in diameter, it's compact enough not to interfere with most optic mounts, furniture, or suppressor height sights on a standard rifle.
Installation requires proper headspacing and alignment—if you're not running your own gunsmithing, have a trusted smith or armorer install it to ensure the device is concentric and safely timed. The nitride finish resists corrosion and handles field use without fussing.
| Caliber | 5.56x45mm NATO |
| Thread Pitch | 1/2"-28 |
| Overall Length | 2.26 inches |
| Outer Diameter | 0.87 inches |
| Material | Steel, black nitride finish |
| Weight | 3.5 oz |
| Vent Ports | 6 |
The MZ1020 is threaded 1/2"-28, the standard pitch for 5.56x45mm NATO AR-15 barrels. Your barrel must have this thread pattern; if you're unsure, check with the barrel manufacturer or have a gunsmith verify before purchase. Installation should be done by someone experienced with proper headspacing and timing.
A linear compensator channels gases forward down the bore, reducing recoil felt by the shooter and side blast that affects nearby shooters. A traditional muzzle brake typically reduces vertical rise by directing gases upward. Linear designs prioritize shooter and bystander comfort over recoil reduction.
Yes, the MZ1020 is USA made steel.
The MZ1020 is a muzzle device with 1/2"-28 threads. A suppressor can be threaded onto it if the suppressor is designed for that pitch, but you would need to verify compatibility with your specific suppressor manufacturer and ensure proper timing and concentricity.
SKU: 115732120 • Width: 1in • Height: 0.9in • Depth: 2.5in • Weight: 0.2oz
Availability: In Stock
The TacFire MZ1020 linear compensator is a steel muzzle device designed for 5.56x45mm NATO AR-15 rifles where shooter comfort and noise management matter. Built from black nitride steel and threaded 1/2"-28, it redirects sound and concussion forward and downrange rather than back toward the shooter, making it particularly useful in training environments, tactical scenarios, or anywhere minimizing side blast is a priority. The design uses six vent ports to channel gases efficiently without adding unnecessary length to your gun.
Linear compensators work differently than traditional brakes: instead of pushing muzzle rise straight up, they funnel concussion forward. If you shoot in populated ranges, train with others nearby, or run drills where your shot placement matters more than recoil control, this approach keeps discomfort off your shoulder and away from your squad. At 2.26 inches overall length and 0.87 inches in diameter, it's compact enough not to interfere with most optic mounts, furniture, or suppressor height sights on a standard rifle.
Installation requires proper headspacing and alignment—if you're not running your own gunsmithing, have a trusted smith or armorer install it to ensure the device is concentric and safely timed. The nitride finish resists corrosion and handles field use without fussing.
| Caliber | 5.56x45mm NATO |
| Thread Pitch | 1/2"-28 |
| Overall Length | 2.26 inches |
| Outer Diameter | 0.87 inches |
| Material | Steel, black nitride finish |
| Weight | 3.5 oz |
| Vent Ports | 6 |
The MZ1020 is threaded 1/2"-28, the standard pitch for 5.56x45mm NATO AR-15 barrels. Your barrel must have this thread pattern; if you're unsure, check with the barrel manufacturer or have a gunsmith verify before purchase. Installation should be done by someone experienced with proper headspacing and timing.
A linear compensator channels gases forward down the bore, reducing recoil felt by the shooter and side blast that affects nearby shooters. A traditional muzzle brake typically reduces vertical rise by directing gases upward. Linear designs prioritize shooter and bystander comfort over recoil reduction.
Yes, the MZ1020 is USA made steel.
The MZ1020 is a muzzle device with 1/2"-28 threads. A suppressor can be threaded onto it if the suppressor is designed for that pitch, but you would need to verify compatibility with your specific suppressor manufacturer and ensure proper timing and concentricity.
SKU: 115732120 • Width: 1in • Height: 0.9in • Depth: 2.5in • Weight: 0.2oz