Availability: In Stock
The TacFire MZ1021 is a direct-impingement muzzle brake built for 5.56x45mm NATO AR-15s running the standard 1/2"-28 thread pitch. If you're running a mid-length or rifle-length gas system and want to tame recoil and muzzle rise without unnecessary complexity, this crown-style brake delivers straightforward performance at a no-nonsense price. Made from steel with a black oxide finish, it's designed to handle the abuse of regular range days and hunting trips without theater.
Muzzle brakes work by redirecting propellant gases to counteract the rearward push and upward rotation of your rifle. The TacFire's crown design channels energy efficiently while keeping overall length compact—at 2.05 inches, it won't extend your rifle into unwieldy territory. That compact footprint also means less weight hanging off the muzzle; at 2.5 ounces, you're not adding significant inertia that'll slow your sight picture recovery. Black oxide steel is a proven, durable finish that resists corrosion in field conditions and won't demand obsessive maintenance.
Installation is straightforward: time the brake to your preferred orientation, lock it down on your 1/2"-28 threads, and you're ready to shoot. It's a practical choice if you're building a modern sporting rifle, upgrading a stock carbine, or simply want to reduce felt recoil and get back on target faster. No flash hider, no suppressor—just a solid American-made brake that does one job well.
| Thread Pitch | 1/2"-28 TPI |
| Caliber | 5.56x45mm NATO |
| Overall Length | 2.05 inches |
| Outer Diameter | 0.87 inches |
| Weight | 2.5 oz |
| Material | Steel |
| Finish | Black Oxide |
| Design | Crown Style |
| Country of Origin | USA |
Yes, if your barrel is threaded 1/2"-28 TPI and chambered in 5.56x45mm NATO or .223 Remington. Verify your barrel thread pitch before ordering—it's the most common spec for modern AR-15s, but always confirm.
Yes. The crown-style design redirects muzzle gases to counteract both backward push and upward rotation. You'll notice reduced felt recoil and faster sight picture recovery, especially on rapid follow-up shots.
The muzzle brake itself. You'll need an appropriately sized wrench or brake tool to install it if your barrel isn't already in a vise; hand-tight installation is not recommended.
Secure your rifle in a vise or use a receiver extension wrench, then thread the brake onto your 1/2"-28 barrel threads. Rotate it to your preferred sight picture orientation and tighten firmly. If your barrel has a crush washer, time the brake after removing it.
SKU: 115802693 • Width: 1.1in • Height: 1in • Depth: 4.1in • Weight: 0.18oz
Availability: In Stock
The TacFire MZ1021 is a direct-impingement muzzle brake built for 5.56x45mm NATO AR-15s running the standard 1/2"-28 thread pitch. If you're running a mid-length or rifle-length gas system and want to tame recoil and muzzle rise without unnecessary complexity, this crown-style brake delivers straightforward performance at a no-nonsense price. Made from steel with a black oxide finish, it's designed to handle the abuse of regular range days and hunting trips without theater.
Muzzle brakes work by redirecting propellant gases to counteract the rearward push and upward rotation of your rifle. The TacFire's crown design channels energy efficiently while keeping overall length compact—at 2.05 inches, it won't extend your rifle into unwieldy territory. That compact footprint also means less weight hanging off the muzzle; at 2.5 ounces, you're not adding significant inertia that'll slow your sight picture recovery. Black oxide steel is a proven, durable finish that resists corrosion in field conditions and won't demand obsessive maintenance.
Installation is straightforward: time the brake to your preferred orientation, lock it down on your 1/2"-28 threads, and you're ready to shoot. It's a practical choice if you're building a modern sporting rifle, upgrading a stock carbine, or simply want to reduce felt recoil and get back on target faster. No flash hider, no suppressor—just a solid American-made brake that does one job well.
| Thread Pitch | 1/2"-28 TPI |
| Caliber | 5.56x45mm NATO |
| Overall Length | 2.05 inches |
| Outer Diameter | 0.87 inches |
| Weight | 2.5 oz |
| Material | Steel |
| Finish | Black Oxide |
| Design | Crown Style |
| Country of Origin | USA |
Yes, if your barrel is threaded 1/2"-28 TPI and chambered in 5.56x45mm NATO or .223 Remington. Verify your barrel thread pitch before ordering—it's the most common spec for modern AR-15s, but always confirm.
Yes. The crown-style design redirects muzzle gases to counteract both backward push and upward rotation. You'll notice reduced felt recoil and faster sight picture recovery, especially on rapid follow-up shots.
The muzzle brake itself. You'll need an appropriately sized wrench or brake tool to install it if your barrel isn't already in a vise; hand-tight installation is not recommended.
Secure your rifle in a vise or use a receiver extension wrench, then thread the brake onto your 1/2"-28 barrel threads. Rotate it to your preferred sight picture orientation and tighten firmly. If your barrel has a crush washer, time the brake after removing it.
SKU: 115802693 • Width: 1.1in • Height: 1in • Depth: 4.1in • Weight: 0.18oz