Availability: In Stock
The Rugged Suppressor FH015 R3 Flash Mitigation System is a compact muzzle brake and flash hider built for 7.62mm rifles, particularly the SR25 platform. If you're running a suppressor-ready rifle and want to control muzzle flash during low-light shooting or training, this flash hider pairs with Rugged's lineup of suppressors using their Dual Taper Locking System. At just 2.13 inches long and threaded 3/4"-24, it's designed to stay out of your way while managing blast signature—a real advantage when you're shooting suppressed and need to see your rounds land.
The R3 uses variable fluted prongs instead of traditional teeth, which means zero ring (no rotating wear marks on your suppressor) and effective flash reduction without the snag points that can catch on gear or get dinged up. The toothless design also makes cleaning and service hassle-free compared to toothed systems. It's lightweight and won't add bulk to your muzzle.
This is purpose-built for shooters who value reliable suppressor compatibility and don't want to compromise on flash control. Whether you're doing precision work at the range, training in variable light, or hunting where a clean sight picture matters, the R3 keeps your setup running smoothly without the headaches of incompatible quick-detach systems.
| Brand | Rugged Suppressor |
| Model | FH015 R3 Flash Mitigation System |
| Caliber/Platform | 7.62mm SR25 |
| Thread Size | 3/4"-24 TPI |
| Overall Length | 2.13" |
| Color | Black |
| Locking System | Dual Taper Locking System (Toothless) |
The FH015 R3 is designed to work with all Rugged rifle and multi-caliber suppressors that use the Dual Taper Locking System. If you're using a Rugged suppressor, this flash hider will interface properly.
Zero ring means the flash hider doesn't rotate against your suppressor under recoil, so there's no wear mark or "ring" left behind. This matters because it preserves the contact between your suppressor and the hider, maintaining a cleaner interface and reducing maintenance headaches over time.
The Rugged R3 uses variable fluted prongs instead of traditional teeth. Fluted designs are snag-free (won't catch on gear or slings) and are simpler to clean and maintain. They deliver effective flash reduction without the potential wear points of toothed systems.
This flash hider is specifically designed for the SR25 platform chambered in 7.62mm. Make sure your rifle has a 3/4"-24 TPI threaded barrel before ordering.
SKU: 115834061 • Width: 1.4in • Height: 1.3in • Depth: 2.6in • Weight: 0.13oz
Availability: In Stock
The Rugged Suppressor FH015 R3 Flash Mitigation System is a compact muzzle brake and flash hider built for 7.62mm rifles, particularly the SR25 platform. If you're running a suppressor-ready rifle and want to control muzzle flash during low-light shooting or training, this flash hider pairs with Rugged's lineup of suppressors using their Dual Taper Locking System. At just 2.13 inches long and threaded 3/4"-24, it's designed to stay out of your way while managing blast signature—a real advantage when you're shooting suppressed and need to see your rounds land.
The R3 uses variable fluted prongs instead of traditional teeth, which means zero ring (no rotating wear marks on your suppressor) and effective flash reduction without the snag points that can catch on gear or get dinged up. The toothless design also makes cleaning and service hassle-free compared to toothed systems. It's lightweight and won't add bulk to your muzzle.
This is purpose-built for shooters who value reliable suppressor compatibility and don't want to compromise on flash control. Whether you're doing precision work at the range, training in variable light, or hunting where a clean sight picture matters, the R3 keeps your setup running smoothly without the headaches of incompatible quick-detach systems.
| Brand | Rugged Suppressor |
| Model | FH015 R3 Flash Mitigation System |
| Caliber/Platform | 7.62mm SR25 |
| Thread Size | 3/4"-24 TPI |
| Overall Length | 2.13" |
| Color | Black |
| Locking System | Dual Taper Locking System (Toothless) |
The FH015 R3 is designed to work with all Rugged rifle and multi-caliber suppressors that use the Dual Taper Locking System. If you're using a Rugged suppressor, this flash hider will interface properly.
Zero ring means the flash hider doesn't rotate against your suppressor under recoil, so there's no wear mark or "ring" left behind. This matters because it preserves the contact between your suppressor and the hider, maintaining a cleaner interface and reducing maintenance headaches over time.
The Rugged R3 uses variable fluted prongs instead of traditional teeth. Fluted designs are snag-free (won't catch on gear or slings) and are simpler to clean and maintain. They deliver effective flash reduction without the potential wear points of toothed systems.
This flash hider is specifically designed for the SR25 platform chambered in 7.62mm. Make sure your rifle has a 3/4"-24 TPI threaded barrel before ordering.
SKU: 115834061 • Width: 1.4in • Height: 1.3in • Depth: 2.6in • Weight: 0.13oz