Availability: In Stock
The Rugged Suppressor FH007 R3 Flash Mitigation System is a purpose-built flash hider designed to work seamlessly with Rugged's line of 7.62mm suppressors—the Radiant762, Surge762, Razor762, and Micro30. If you're running a suppressed 7.62 rifle and want to dial in your muzzle signature without sacrificing compactness, this is a no-nonsense option that handles the job with minimal bulk.
What sets the R3 apart is its variable fluted prong design, engineered to reduce flash signature while keeping weight and length in check. The system uses Rugged's Dual Taper Locking mechanism—a toothless design that means nothing to snag on gear or holsters, and nothing to wear or gall over time. That same interface locks solidly to all compatible Rugged suppressors, so you get a repeatable, rock-solid connection every time. At 2.13 inches overall length, the R3 is compact enough to thread onto shorter barrels; in fact, Rugged notes it's long enough to permanently attach to 14.5" barrels and bring them into the 16" range if you need to stay legal and quiet.
The 9/16"-24 TPI threads are the Rugged standard for this caliber class. It's finished in black and built to pair directly with the suppressors listed above—no adapters, no guesswork. If you're suppressing a 7.62 platform and want flash control that doesn't bloat your rifle's profile, the R3 Flash Mitigation System delivers.
| Brand | Rugged Suppressor |
| Model | FH007 R3 Flash Mitigation System |
| Caliber/Application | 7.62mm |
| Thread Pattern | 9/16"-24 TPI |
| Overall Length | 2.13" |
| Finish | Black |
| Locking System | Dual Taper (Toothless) |
The R3 is designed to work with Rugged's 7.62mm suppressors: the Radiant762, Surge762, Razor762, and Micro30. It uses the Dual Taper Locking System that's standard across Rugged's compatible line.
Yes. Rugged specifically notes that the R3 is long enough to permanently attach to 14.5" barrels, bringing the total length to 16" when installed.
The toothless design eliminates the snag points and wear surfaces found on traditional toothed systems. That means less chance of catching on gear, and a connection that holds up over extended use without galling or degradation.
The FH007 R3 is threaded 9/16"-24 TPI, which is the standard thread pattern for Rugged 7.62mm suppressors and flash mitigation systems.
SKU: 115673130 • Width: 1.5in • Height: 1.4in • Depth: 2.5in • Weight: 0.25oz
Availability: In Stock
The Rugged Suppressor FH007 R3 Flash Mitigation System is a purpose-built flash hider designed to work seamlessly with Rugged's line of 7.62mm suppressors—the Radiant762, Surge762, Razor762, and Micro30. If you're running a suppressed 7.62 rifle and want to dial in your muzzle signature without sacrificing compactness, this is a no-nonsense option that handles the job with minimal bulk.
What sets the R3 apart is its variable fluted prong design, engineered to reduce flash signature while keeping weight and length in check. The system uses Rugged's Dual Taper Locking mechanism—a toothless design that means nothing to snag on gear or holsters, and nothing to wear or gall over time. That same interface locks solidly to all compatible Rugged suppressors, so you get a repeatable, rock-solid connection every time. At 2.13 inches overall length, the R3 is compact enough to thread onto shorter barrels; in fact, Rugged notes it's long enough to permanently attach to 14.5" barrels and bring them into the 16" range if you need to stay legal and quiet.
The 9/16"-24 TPI threads are the Rugged standard for this caliber class. It's finished in black and built to pair directly with the suppressors listed above—no adapters, no guesswork. If you're suppressing a 7.62 platform and want flash control that doesn't bloat your rifle's profile, the R3 Flash Mitigation System delivers.
| Brand | Rugged Suppressor |
| Model | FH007 R3 Flash Mitigation System |
| Caliber/Application | 7.62mm |
| Thread Pattern | 9/16"-24 TPI |
| Overall Length | 2.13" |
| Finish | Black |
| Locking System | Dual Taper (Toothless) |
The R3 is designed to work with Rugged's 7.62mm suppressors: the Radiant762, Surge762, Razor762, and Micro30. It uses the Dual Taper Locking System that's standard across Rugged's compatible line.
Yes. Rugged specifically notes that the R3 is long enough to permanently attach to 14.5" barrels, bringing the total length to 16" when installed.
The toothless design eliminates the snag points and wear surfaces found on traditional toothed systems. That means less chance of catching on gear, and a connection that holds up over extended use without galling or degradation.
The FH007 R3 is threaded 9/16"-24 TPI, which is the standard thread pattern for Rugged 7.62mm suppressors and flash mitigation systems.
SKU: 115673130 • Width: 1.5in • Height: 1.4in • Depth: 2.5in • Weight: 0.25oz