Loading...
Loading...
Loading...
Availability: In Stock
The Rugged Suppressor FH010 R3 Flash Mitigation System is a compact muzzle device built to control flash signature on suppressed 7.62mm rifles while maintaining a low-profile footprint. If you're running a Rugged Radiant762, Surge762, Razor762, or Micro30 suppressor, the R3 flash hider integrates seamlessly using Rugged's toothless Dual Taper Locking System—no teeth to catch snag or require alignment fussing. At just 2.13 inches overall length, it's nimble enough for short-barreled work; in fact, it's long enough to permanently attach to a 14.5-inch barrel and bring the rifle to legal rifle length, making it a practical choice for builders working within those constraints.
Flash hiders matter when you're running suppressed. Even with a can in place, muzzle flash can still reach your optics under low-light conditions, and the R3's variable fluted prongs are engineered to mitigate that signature. The design is lightweight and doesn't add unnecessary bulk to your setup, which keeps your overall gun handling sharp when every ounce counts.
This is a no-frills, purpose-built accessory for shooters who already own a Rugged suppressor and want flash control dialed in. It threads on M18x1.5 and locks into place via Rugged's proven taper system. Not a magic wand for perfect zero-flash performance—no muzzle device achieves that—but a solid, reliable piece from a suppressor manufacturer who knows their own cans inside and out.
| Thread Pattern | M18x1.5 |
| Overall Length | 2.13 inches |
| Caliber Compatibility | 7.62mm (use with Rugged Radiant762, Surge762, Razor762, or Micro30) |
| Finish | Black |
| Locking System | Dual Taper (toothless) |
The R3 Flash Mitigation System is designed for the Rugged Radiant762, Surge762, Razor762, and Micro30 suppressors. It uses Rugged's Dual Taper Locking System, which locks it securely to these cans and any other Rugged rifle or multi-caliber suppressor using the same locking interface.
Yes. The R3 is long enough to permanently attach to a 14.5-inch barrel and bring the overall rifle length to 16 inches, making it compliant for configurations where length requirements matter.
The R3 threads on M18x1.5. Make sure your barrel is already threaded to this specification before purchase.
This flash hider is designed to work with Rugged suppressors using their Dual Taper Locking System. It is not compatible with suppressors from other manufacturers.
SKU: 115749056 • Width: 1.2in • Height: 0.5in • Depth: 1.4in • Weight: 0.19oz
Availability: In Stock
The Rugged Suppressor FH010 R3 Flash Mitigation System is a compact muzzle device built to control flash signature on suppressed 7.62mm rifles while maintaining a low-profile footprint. If you're running a Rugged Radiant762, Surge762, Razor762, or Micro30 suppressor, the R3 flash hider integrates seamlessly using Rugged's toothless Dual Taper Locking System—no teeth to catch snag or require alignment fussing. At just 2.13 inches overall length, it's nimble enough for short-barreled work; in fact, it's long enough to permanently attach to a 14.5-inch barrel and bring the rifle to legal rifle length, making it a practical choice for builders working within those constraints.
Flash hiders matter when you're running suppressed. Even with a can in place, muzzle flash can still reach your optics under low-light conditions, and the R3's variable fluted prongs are engineered to mitigate that signature. The design is lightweight and doesn't add unnecessary bulk to your setup, which keeps your overall gun handling sharp when every ounce counts.
This is a no-frills, purpose-built accessory for shooters who already own a Rugged suppressor and want flash control dialed in. It threads on M18x1.5 and locks into place via Rugged's proven taper system. Not a magic wand for perfect zero-flash performance—no muzzle device achieves that—but a solid, reliable piece from a suppressor manufacturer who knows their own cans inside and out.
| Thread Pattern | M18x1.5 |
| Overall Length | 2.13 inches |
| Caliber Compatibility | 7.62mm (use with Rugged Radiant762, Surge762, Razor762, or Micro30) |
| Finish | Black |
| Locking System | Dual Taper (toothless) |
The R3 Flash Mitigation System is designed for the Rugged Radiant762, Surge762, Razor762, and Micro30 suppressors. It uses Rugged's Dual Taper Locking System, which locks it securely to these cans and any other Rugged rifle or multi-caliber suppressor using the same locking interface.
Yes. The R3 is long enough to permanently attach to a 14.5-inch barrel and bring the overall rifle length to 16 inches, making it compliant for configurations where length requirements matter.
The R3 threads on M18x1.5. Make sure your barrel is already threaded to this specification before purchase.
This flash hider is designed to work with Rugged suppressors using their Dual Taper Locking System. It is not compatible with suppressors from other manufacturers.
SKU: 115749056 • Width: 1.2in • Height: 0.5in • Depth: 1.4in • Weight: 0.19oz