$292.46$293.63
Availability: In Stock
The Reptilia AUS 34mm Picatinny-style scope mount brings serious engineering to high-magnification optics on modern rifles. Built from a single piece of 7075-T6 billet aluminum and finished with MIL-STD Type III hard anodize, this mount delivers the durability and precision shooters demand when running premium magnified scopes. The integral 34mm rings eliminate the need for separate ring components, streamlining your build and reducing points of failure. Whether you're setting up a precision rifle, hunting rig, or duty gun, the AUS handles the job without compromise.
What sets the AUS apart is its thoughtful design born from real-world feedback. The anti-snag, spring-loaded nitrided steel clamp system locks down to any M1913 Picatinny rail with zero wobble. The custom bolt mounting accepts either a 5/32 hex key or flat blade driver—your choice—and sits flush with the mount body for a clean, low-profile aesthetic that won't catch on gear. At 1.54 inches of bore height, the AUS clears most objective bells up to 77mm on flat-top receivers, giving you flexibility in optic selection and co-witness options.
Reptilia backs every AUS mount with a full lifetime warranty against manufacturer defects, and the entire piece is made right here in the USA. The AUS is fully compatible with Reptilia's 30mm ROF (Return of the Mount line and upcoming new products in that ecosystem, making it a solid foundation for a modular setup that grows with your needs.
| Brand | Reptilia |
| Mount Type | Picatinny-style with integral rings |
| Ring Diameter | 34mm |
| Bore Height | 1.54 inches (39mm) |
| Maximum Objective Diameter | 77mm (flat-top receivers) |
| Material | 7075-T6 billet aluminum |
| Finish | MIL-STD Type III Class 2 hard anodize |
| Weight | 158 grams |
| Clamp Type | Spring-loaded nitrided steel |
| Mount Bolt | Dual-drive (5/32 hex or flat blade) |
| Warranty | Full lifetime against manufacturer defects |
| Origin | Made in USA |
Yes. The AUS uses an M1913 Picatinny-compatible clamp system, so it attaches to any standard Picatinny rail on modern rifles, ARs, and other platforms.
The AUS is designed for 34mm-diameter magnified optics. It features integral rings sized for 34mm scope tubes and will accommodate objectives up to 77mm on flat-top receivers.
Yes. The AUS is fully compatible with Reptilia's 30mm ROF (Return of the Mount) line and will work with new ROF products in upcoming releases.
The custom mounting bolt accepts either a 5/32 hex key or a flat blade driver, giving you flexibility in how you prefer to tighten it down. The bolt sits flush with the mount body for a low-profile look.
SKU: 114460964 • Width: 4.25in • Height: 2.5in • Depth: 7.25in • Weight: 0.63oz
Availability: In Stock
The Reptilia AUS 34mm Picatinny-style scope mount brings serious engineering to high-magnification optics on modern rifles. Built from a single piece of 7075-T6 billet aluminum and finished with MIL-STD Type III hard anodize, this mount delivers the durability and precision shooters demand when running premium magnified scopes. The integral 34mm rings eliminate the need for separate ring components, streamlining your build and reducing points of failure. Whether you're setting up a precision rifle, hunting rig, or duty gun, the AUS handles the job without compromise.
What sets the AUS apart is its thoughtful design born from real-world feedback. The anti-snag, spring-loaded nitrided steel clamp system locks down to any M1913 Picatinny rail with zero wobble. The custom bolt mounting accepts either a 5/32 hex key or flat blade driver—your choice—and sits flush with the mount body for a clean, low-profile aesthetic that won't catch on gear. At 1.54 inches of bore height, the AUS clears most objective bells up to 77mm on flat-top receivers, giving you flexibility in optic selection and co-witness options.
Reptilia backs every AUS mount with a full lifetime warranty against manufacturer defects, and the entire piece is made right here in the USA. The AUS is fully compatible with Reptilia's 30mm ROF (Return of the Mount line and upcoming new products in that ecosystem, making it a solid foundation for a modular setup that grows with your needs.
| Brand | Reptilia |
| Mount Type | Picatinny-style with integral rings |
| Ring Diameter | 34mm |
| Bore Height | 1.54 inches (39mm) |
| Maximum Objective Diameter | 77mm (flat-top receivers) |
| Material | 7075-T6 billet aluminum |
| Finish | MIL-STD Type III Class 2 hard anodize |
| Weight | 158 grams |
| Clamp Type | Spring-loaded nitrided steel |
| Mount Bolt | Dual-drive (5/32 hex or flat blade) |
| Warranty | Full lifetime against manufacturer defects |
| Origin | Made in USA |
Yes. The AUS uses an M1913 Picatinny-compatible clamp system, so it attaches to any standard Picatinny rail on modern rifles, ARs, and other platforms.
The AUS is designed for 34mm-diameter magnified optics. It features integral rings sized for 34mm scope tubes and will accommodate objectives up to 77mm on flat-top receivers.
Yes. The AUS is fully compatible with Reptilia's 30mm ROF (Return of the Mount) line and will work with new ROF products in upcoming releases.
The custom mounting bolt accepts either a 5/32 hex key or a flat blade driver, giving you flexibility in how you prefer to tighten it down. The bolt sits flush with the mount body for a low-profile look.
SKU: 114460964 • Width: 4.25in • Height: 2.5in • Depth: 7.25in • Weight: 0.63oz