Reptilia126511873
Reptilia AUS 30mm Scope Mount - 1.70" Height, Precision Machined Tactical Optic Mount$299.66$293.63
Availability: In Stock
The Reptilia AUS 34mm scope mount is a purpose-built optic mount engineered for shooters running magnified glass on modern tactical rifles. Built from the ground up over two years of development, this 1.70-inch height mount positions your 34mm scope at an optimal sight line for AR platforms and other Picatinny-railed systems, balancing sight-over-bore geometry with natural cheek weld and ergonomics.
Like Reptilia's proven DOT mount line, the AUS is machined from a single billet of 7075-T6 aluminum and finished with hard-anodize coating to military specifications. The spring-loaded, nitrided steel clamp system grips any M1913 Picatinny rail securely and clears objective bells up to 86mm on flat-top receivers. Setup is straightforward—a T-25 Torx key or flat-blade driver tightens the custom bolt system, which sits flush with the mount body for a clean, snag-free profile. At 165 grams, it won't bog down your build.
The AUS integrates seamlessly with Reptilia's 34mm ring-of-fire (ROF) ecosystem if you're running multiple optics or building out a modular system. Every Reptilia mount is manufactured in the USA and backed by a full lifetime warranty against defects, giving you confidence in a critical component of your rifle's optics platform.
| Bore Diameter | 34mm |
| Bore Height | 1.70 inches (43.2mm) |
| Material | 7075-T6 aluminum billet |
| Finish | MIL-STD Type III Class 2 hard anodize |
| Clamp | Spring-loaded, nitrided steel; M1913 Picatinny rail compatible |
| Max Objective Clearance | Up to 86mm (flat-top Picatinny) |
| Weight | 165 grams |
| Fastener | T-25 Torx or flat-blade compatible |
| Country of Origin | USA |
| Warranty | Lifetime, against manufacturer defects |
The AUS mount places your 34mm optic at 1.70 inches (43.2mm) of bore height, a dimension developed specifically to work well with AR-platform ergonomics and naturally align your head on a modern rifle stock for both magnified and lower-power glass.
Yes. The AUS mounts to any M1913 Picatinny rail via its spring-loaded clamp system and can be removed or repositioned without permanent modification to your receiver or handguard.
The AUS accommodates objectives up to 86mm in diameter on flat-top Picatinny rails. Measure your scope's objective bell diameter to confirm clearance with your specific setup.
Yes. The AUS is compatible with Reptilia's existing 34mm ROF (ring-of-fire) lineup, allowing you to build a modular optics ecosystem across multiple rifles if desired.
SKU: 126511869 • Weight: 0.63oz
Availability: In Stock
The Reptilia AUS 34mm scope mount is a purpose-built optic mount engineered for shooters running magnified glass on modern tactical rifles. Built from the ground up over two years of development, this 1.70-inch height mount positions your 34mm scope at an optimal sight line for AR platforms and other Picatinny-railed systems, balancing sight-over-bore geometry with natural cheek weld and ergonomics.
Like Reptilia's proven DOT mount line, the AUS is machined from a single billet of 7075-T6 aluminum and finished with hard-anodize coating to military specifications. The spring-loaded, nitrided steel clamp system grips any M1913 Picatinny rail securely and clears objective bells up to 86mm on flat-top receivers. Setup is straightforward—a T-25 Torx key or flat-blade driver tightens the custom bolt system, which sits flush with the mount body for a clean, snag-free profile. At 165 grams, it won't bog down your build.
The AUS integrates seamlessly with Reptilia's 34mm ring-of-fire (ROF) ecosystem if you're running multiple optics or building out a modular system. Every Reptilia mount is manufactured in the USA and backed by a full lifetime warranty against defects, giving you confidence in a critical component of your rifle's optics platform.
| Bore Diameter | 34mm |
| Bore Height | 1.70 inches (43.2mm) |
| Material | 7075-T6 aluminum billet |
| Finish | MIL-STD Type III Class 2 hard anodize |
| Clamp | Spring-loaded, nitrided steel; M1913 Picatinny rail compatible |
| Max Objective Clearance | Up to 86mm (flat-top Picatinny) |
| Weight | 165 grams |
| Fastener | T-25 Torx or flat-blade compatible |
| Country of Origin | USA |
| Warranty | Lifetime, against manufacturer defects |
The AUS mount places your 34mm optic at 1.70 inches (43.2mm) of bore height, a dimension developed specifically to work well with AR-platform ergonomics and naturally align your head on a modern rifle stock for both magnified and lower-power glass.
Yes. The AUS mounts to any M1913 Picatinny rail via its spring-loaded clamp system and can be removed or repositioned without permanent modification to your receiver or handguard.
The AUS accommodates objectives up to 86mm in diameter on flat-top Picatinny rails. Measure your scope's objective bell diameter to confirm clearance with your specific setup.
Yes. The AUS is compatible with Reptilia's existing 34mm ROF (ring-of-fire) lineup, allowing you to build a modular optics ecosystem across multiple rifles if desired.
SKU: 126511869 • Weight: 0.63oz