$292.46 – $293.63
Availability: In Stock
The Reptilia AUS 30mm Picatinny-style scope mount delivers rock-solid, no-fuss optics mounting for serious shooters running magnified 30mm scopes on AR platforms and other railed systems. Born from a two-year collaboration with demanding end users, the AUS combines American manufacturing precision with a low-profile design that won't snag gear or slow you down when it matters. Whether you're setting up a precision rifle, a hunting AR, or a dedicated range gun, this mount bolts to any M1913 Picatinny rail and stays put through recoil and hard use.
The engineering here is straightforward and purposeful. Reptilia machines the entire mount from a single piece of 7075-T6 billet aluminum, then applies a hard anodized MIL-STD Type III finish for durability without flash. The anti-snag, spring-loaded nitrided steel clamp locks down tight to the rail, and you can tighten the custom bolt system with either a 5/32 hex key or a flat blade—your call. The design sits flush and streamlined, keeping everything compact and snag-free. At just 158 grams, it won't add unnecessary weight to your rifle.
The 1.54-inch bore height places your glass at a practical mounting plane for most AR builds and modern rifle platforms. The integral 30mm rings are compatible with the full Reptilia ROF (Reptilia Optic Fit) line, and future ROF products will work with this mount as they launch. Everything is made in the USA and covered by Reptilia's lifetime warranty against manufacturer defects—a promise backed by a company known for standing behind its gear.
| Material | 7075-T6 billet aluminum |
| Finish | MIL-STD Type III, Class 2 hard anodize |
| Bore Diameter | 30mm |
| Bore Height | 39mm (1.54 inches) |
| Weight | 158 grams |
| Rail Type | M1913 Picatinny |
| Fastener Options | 5/32 hex key or flathead screwdriver |
| Origin | Made in USA |
Yes. The AUS mount attaches to any M1913 Picatinny rail via its spring-loaded clamp system. That covers most modern AR platforms, chassis rifles, and other tactical rifles with a top rail.
The integral 30mm rings fit all Reptilia ROF (Reptilia Optic Fit) magnified optics and will be compatible with new ROF products launching in the coming months. If you're running a different 30mm magnified scope, confirm it meets ROF specifications before purchasing.
The mount ships with integral 30mm rings built in—no separate ring purchase necessary. Tighten the clamp bolt to the rail and you're ready to install your optic.
The bore height is 39mm (1.54 inches), which establishes a standard, practical cheek weld and sight picture for most AR-platform rifles and other railed systems.
SKU: 114460923 • Width: 4.25in • Height: 2.75in • Depth: 7.45in • Weight: 0.63oz
Availability: In Stock
The Reptilia AUS 30mm Picatinny-style scope mount delivers rock-solid, no-fuss optics mounting for serious shooters running magnified 30mm scopes on AR platforms and other railed systems. Born from a two-year collaboration with demanding end users, the AUS combines American manufacturing precision with a low-profile design that won't snag gear or slow you down when it matters. Whether you're setting up a precision rifle, a hunting AR, or a dedicated range gun, this mount bolts to any M1913 Picatinny rail and stays put through recoil and hard use.
The engineering here is straightforward and purposeful. Reptilia machines the entire mount from a single piece of 7075-T6 billet aluminum, then applies a hard anodized MIL-STD Type III finish for durability without flash. The anti-snag, spring-loaded nitrided steel clamp locks down tight to the rail, and you can tighten the custom bolt system with either a 5/32 hex key or a flat blade—your call. The design sits flush and streamlined, keeping everything compact and snag-free. At just 158 grams, it won't add unnecessary weight to your rifle.
The 1.54-inch bore height places your glass at a practical mounting plane for most AR builds and modern rifle platforms. The integral 30mm rings are compatible with the full Reptilia ROF (Reptilia Optic Fit) line, and future ROF products will work with this mount as they launch. Everything is made in the USA and covered by Reptilia's lifetime warranty against manufacturer defects—a promise backed by a company known for standing behind its gear.
| Material | 7075-T6 billet aluminum |
| Finish | MIL-STD Type III, Class 2 hard anodize |
| Bore Diameter | 30mm |
| Bore Height | 39mm (1.54 inches) |
| Weight | 158 grams |
| Rail Type | M1913 Picatinny |
| Fastener Options | 5/32 hex key or flathead screwdriver |
| Origin | Made in USA |
Yes. The AUS mount attaches to any M1913 Picatinny rail via its spring-loaded clamp system. That covers most modern AR platforms, chassis rifles, and other tactical rifles with a top rail.
The integral 30mm rings fit all Reptilia ROF (Reptilia Optic Fit) magnified optics and will be compatible with new ROF products launching in the coming months. If you're running a different 30mm magnified scope, confirm it meets ROF specifications before purchasing.
The mount ships with integral 30mm rings built in—no separate ring purchase necessary. Tighten the clamp bolt to the rail and you're ready to install your optic.
The bore height is 39mm (1.54 inches), which establishes a standard, practical cheek weld and sight picture for most AR-platform rifles and other railed systems.
SKU: 114460923 • Width: 4.25in • Height: 2.75in • Depth: 7.45in • Weight: 0.63oz