RCBS115716018
RCBS .41 Caliber Bullet Puller Collet$16.43
Availability: In Stock
The RCBS 9435 Standard Bullet Puller Collet in .44 caliber is an essential tool for reloaders who need to safely extract jacketed bullets from fired brass without damaging either component. Whether you're sorting through mixed brass, salvaging bullets from discontinued loads, or fixing a loading mistake, this collet-style puller threads directly into your single-stage reloading press—no special equipment needed. The straightforward design and proven RCBS engineering mean you can get back to loading quickly without the frustration of mangled cases or bullets.
Setup is refreshingly simple: install the .44 caliber collet into your press, position your cartridge in the shell holder, and operate the press ram to extract the bullet. The collet grips the bullet securely while protecting your brass from damage. Because it uses standard 7/8-inch-14 threads, it's compatible with virtually all single-stage presses, making it a universal solution whether you're running a classic RCBS A-5 or any other mainstream reloading press on your bench.
Reloaders appreciate this tool for its durability and reliability over dozens of pulls. Unlike impact-style pullers that can stress your press, the collet approach gives you controlled, consistent extraction every time. Keep one in your reloading room and you'll find reasons to use it—salvaging premium brass, testing loads, or simply recovering components when plans change.
| Product Name | RCBS 9435 Standard Bullet Puller Collet |
| Caliber | .44 |
| Thread Size | 7/8-inch-14 |
| Type | Collet-style bullet puller |
| Manufacturer | RCBS |
Yes, as long as your press features standard 7/8-inch-14 threads, which is the industry standard for single-stage presses. This covers virtually all modern RCBS, Hornady, Lee, and similar single-stage loaders.
This collet is specifically designed for .44 caliber cartridges. RCBS makes separate collet pullers for other calibers, so you'd need the appropriately sized collet for rifles or pistols in different bore diameters.
A collet puller like this one uses a hand-operated press to extract bullets smoothly and controllably, protecting both brass and components. Impact pullers work by striking the puller handle, which can be faster for high-volume work but may stress your press more over time.
This is the collet puller die itself. You'll need to mount it in your reloading press using the standard 7/8-inch-14 threads and have a shell holder appropriate for your .44 cartridge.
SKU: 115714218 • Width: 1.9in • Height: 0.7in • Depth: 5.9in • Weight: 0.08oz
Availability: In Stock
The RCBS 9435 Standard Bullet Puller Collet in .44 caliber is an essential tool for reloaders who need to safely extract jacketed bullets from fired brass without damaging either component. Whether you're sorting through mixed brass, salvaging bullets from discontinued loads, or fixing a loading mistake, this collet-style puller threads directly into your single-stage reloading press—no special equipment needed. The straightforward design and proven RCBS engineering mean you can get back to loading quickly without the frustration of mangled cases or bullets.
Setup is refreshingly simple: install the .44 caliber collet into your press, position your cartridge in the shell holder, and operate the press ram to extract the bullet. The collet grips the bullet securely while protecting your brass from damage. Because it uses standard 7/8-inch-14 threads, it's compatible with virtually all single-stage presses, making it a universal solution whether you're running a classic RCBS A-5 or any other mainstream reloading press on your bench.
Reloaders appreciate this tool for its durability and reliability over dozens of pulls. Unlike impact-style pullers that can stress your press, the collet approach gives you controlled, consistent extraction every time. Keep one in your reloading room and you'll find reasons to use it—salvaging premium brass, testing loads, or simply recovering components when plans change.
| Product Name | RCBS 9435 Standard Bullet Puller Collet |
| Caliber | .44 |
| Thread Size | 7/8-inch-14 |
| Type | Collet-style bullet puller |
| Manufacturer | RCBS |
Yes, as long as your press features standard 7/8-inch-14 threads, which is the industry standard for single-stage presses. This covers virtually all modern RCBS, Hornady, Lee, and similar single-stage loaders.
This collet is specifically designed for .44 caliber cartridges. RCBS makes separate collet pullers for other calibers, so you'd need the appropriately sized collet for rifles or pistols in different bore diameters.
A collet puller like this one uses a hand-operated press to extract bullets smoothly and controllably, protecting both brass and components. Impact pullers work by striking the puller handle, which can be faster for high-volume work but may stress your press more over time.
This is the collet puller die itself. You'll need to mount it in your reloading press using the standard 7/8-inch-14 threads and have a shell holder appropriate for your .44 cartridge.
SKU: 115714218 • Width: 1.9in • Height: 0.7in • Depth: 5.9in • Weight: 0.08oz
