Magpul152743236
Magpul Mag1422-Blk Stock Black Remington 700 Short Action$208.95
Availability: In Stock
The Magpul Hunter Lite stock for Remington 700 short-action rifles delivers a purpose-built hunting platform that strips away unnecessary bulk without sacrificing rigidity or features. If you're running a short-action 700 and want a stock that keeps your rifle nimble in the field, this FDE (Flat Dark Earth) option combines Magpul's proven design with meaningful weight savings—nearly 25% lighter than the original Hunter stock—and a slimmer forend that's easier to maneuver through brush and tight shooting positions.
Built on an extruded aluminum V-bedding block with reinforced steel pillars, the Hunter Lite provides the receiver support and consistency hunters expect from a precision-rifle platform. The stock handles a wide range of factory and aftermarket barrels, including Remington's VTR triangular contours, up to Medium Palma profile. Ambidextrous conversion is straightforward—swap the included inserts to configure it for left or right-hand shooters without any gunsmithing.
Ergonomics are thoughtfully integrated. Integral sling swivel studs on both buttstock and forend anchor your carry system or bipod; the enlarged trigger guard won't fight you when wearing gloves; and removable spacers let you dial in length of pull between 13 and 15 inches. Snap-on cheek risers adjust comb height for proper sight picture with your optic. M-LOK slots across the forend give you attachment points for lights, bags, or other accessories, while stamped steel over-insertion tabs in the magazine well keep your loaded magazine seated predictably shot after shot.
This is a working hunter's stock: made in the USA, uncluttered design, and engineered for rifles meant to be carried far and shot accurately once.
| Platform | Remington 700 |
| Caliber Compatibility | Short-action Remington 700 and 700-pattern receivers |
| Barrel Compatibility | Barrels up to Medium Palma (0.920" dia., 5.50" forward of breech); accepts factory VTR triangular contours and most factory/aftermarket triggers |
| Length of Pull | 13–15 inches (adjustable with included spacers) |
| Weight | 2.4 lbs |
| Buttpad Dimensions | 1.5 × 4.9 inches |
| Butt Width (max) | 1.5 inches without riser; 1.75 inches with riser |
| Stock Width (max) | 1.75 inches |
| Finish | FDE (Flat Dark Earth) |
| Hand Configuration | Convertible right/left (inserts included) |
Yes, the Hunter Lite is designed for short-action Remington 700 rifles and 700-pattern receivers. However, it is not compatible with Remington hinged floor plates due to its integral magazine well design. Ensure your rifle uses a detachable box magazine setup.
Absolutely. The stock ships with inserts that let you reconfigure it for either right or left-hand shooters. No gunsmithing is required—you simply swap the inserts.
The Hunter Lite accommodates barrels up to Medium Palma profile (0.920" diameter, 5.50" forward of the breech). It accepts all factory Remington barrels, including the VTR triangular contours, and most factory and aftermarket triggers.
Yes. The stock includes removable half-inch spacers that allow you to adjust length of pull between 13 and 15 inches to fit your frame and shooting style.
SKU: 152742792
Availability: In Stock
The Magpul Hunter Lite stock for Remington 700 short-action rifles delivers a purpose-built hunting platform that strips away unnecessary bulk without sacrificing rigidity or features. If you're running a short-action 700 and want a stock that keeps your rifle nimble in the field, this FDE (Flat Dark Earth) option combines Magpul's proven design with meaningful weight savings—nearly 25% lighter than the original Hunter stock—and a slimmer forend that's easier to maneuver through brush and tight shooting positions.
Built on an extruded aluminum V-bedding block with reinforced steel pillars, the Hunter Lite provides the receiver support and consistency hunters expect from a precision-rifle platform. The stock handles a wide range of factory and aftermarket barrels, including Remington's VTR triangular contours, up to Medium Palma profile. Ambidextrous conversion is straightforward—swap the included inserts to configure it for left or right-hand shooters without any gunsmithing.
Ergonomics are thoughtfully integrated. Integral sling swivel studs on both buttstock and forend anchor your carry system or bipod; the enlarged trigger guard won't fight you when wearing gloves; and removable spacers let you dial in length of pull between 13 and 15 inches. Snap-on cheek risers adjust comb height for proper sight picture with your optic. M-LOK slots across the forend give you attachment points for lights, bags, or other accessories, while stamped steel over-insertion tabs in the magazine well keep your loaded magazine seated predictably shot after shot.
This is a working hunter's stock: made in the USA, uncluttered design, and engineered for rifles meant to be carried far and shot accurately once.
| Platform | Remington 700 |
| Caliber Compatibility | Short-action Remington 700 and 700-pattern receivers |
| Barrel Compatibility | Barrels up to Medium Palma (0.920" dia., 5.50" forward of breech); accepts factory VTR triangular contours and most factory/aftermarket triggers |
| Length of Pull | 13–15 inches (adjustable with included spacers) |
| Weight | 2.4 lbs |
| Buttpad Dimensions | 1.5 × 4.9 inches |
| Butt Width (max) | 1.5 inches without riser; 1.75 inches with riser |
| Stock Width (max) | 1.75 inches |
| Finish | FDE (Flat Dark Earth) |
| Hand Configuration | Convertible right/left (inserts included) |
Yes, the Hunter Lite is designed for short-action Remington 700 rifles and 700-pattern receivers. However, it is not compatible with Remington hinged floor plates due to its integral magazine well design. Ensure your rifle uses a detachable box magazine setup.
Absolutely. The stock ships with inserts that let you reconfigure it for either right or left-hand shooters. No gunsmithing is required—you simply swap the inserts.
The Hunter Lite accommodates barrels up to Medium Palma profile (0.920" diameter, 5.50" forward of the breech). It accepts all factory Remington barrels, including the VTR triangular contours, and most factory and aftermarket triggers.
Yes. The stock includes removable half-inch spacers that allow you to adjust length of pull between 13 and 15 inches to fit your frame and shooting style.
SKU: 152742792