Lee Precisiom167524488
Lee Production Pot Iv Melter 10 Lb Capacity 220 Volt$89.91
Availability: In Stock
The Lee Production Pot IV 110V is a high-capacity lead melter built for anglers and sinker makers who need to pour volume without downtime. This 110-volt furnace holds 20 pounds of lead in a 4" x 4" carbon steel pot, giving you enough molten material to run extended casting sessions. Whether you're making ball sinkers, split shot, or custom weights, the Production Pot IV combines practical capacity with precise temperature control to keep your workflow moving.
Lee's proven melting design uses a remote sensing thermostat to maintain consistent heat, eliminating the temperature swings that can cause pour problems. The micro-adjustable flow control valve lets you dial in the pour rate—you can push out two- and three-ounce sinkers quickly without wrinkles or defects. The adjustable mold guide keeps your molds aligned and steady during casting, and four inches of clearance beneath the spout gives you room to work with different mold types and configurations.
At 700 watts, the Production Pot IV heats up efficiently and holds temperature reliably. It's backed by Lee Precision's two-year manufacturer warranty, so you can cast with confidence. If your operation grows and you need 220-volt power down the road, Lee also makes a 220V version of this same furnace.
| Brand | Lee Precision |
| Model | 90009 |
| Voltage | 110V AC |
| Wattage | 700 watts |
| Pot Capacity | 20 pounds of lead |
| Pot Interior | 4" x 4" |
| Pot Material | Carbon steel |
| Clearance Under Spout | 4 inches |
| Thermostat | Remote sensing, adjustable |
| Warranty | 2 years (manufacturer) |
The Production Pot IV's adjustable flow control valve is designed to pour sinkers up to two and three ounces quickly and without wrinkles. Smaller weights are easy to cast as well—the flow valve gives you the control to dial in your pour rate.
Due to the position of the pour spout underneath this furnace, it's not ideally suited for bottom-pouring spinner jig molds or other molds that require wires to protrude above the mold cavity. It works well with conventional sinker molds and other designs that don't require bottom pouring.
The Production Pot IV includes the melter, flow control valve, and adjustable mold guide. You'll need to supply your own sinker molds and casting tools to get started.
Yes—Lee Precision offers a 220-volt version of the Production Pot IV if your shop grows or you need higher-voltage operation in the future.
SKU: 121689011 • Width: 7.9in • Height: 7in • Depth: 10.9in • Weight: 3.6oz
Availability: In Stock
The Lee Production Pot IV 110V is a high-capacity lead melter built for anglers and sinker makers who need to pour volume without downtime. This 110-volt furnace holds 20 pounds of lead in a 4" x 4" carbon steel pot, giving you enough molten material to run extended casting sessions. Whether you're making ball sinkers, split shot, or custom weights, the Production Pot IV combines practical capacity with precise temperature control to keep your workflow moving.
Lee's proven melting design uses a remote sensing thermostat to maintain consistent heat, eliminating the temperature swings that can cause pour problems. The micro-adjustable flow control valve lets you dial in the pour rate—you can push out two- and three-ounce sinkers quickly without wrinkles or defects. The adjustable mold guide keeps your molds aligned and steady during casting, and four inches of clearance beneath the spout gives you room to work with different mold types and configurations.
At 700 watts, the Production Pot IV heats up efficiently and holds temperature reliably. It's backed by Lee Precision's two-year manufacturer warranty, so you can cast with confidence. If your operation grows and you need 220-volt power down the road, Lee also makes a 220V version of this same furnace.
| Brand | Lee Precision |
| Model | 90009 |
| Voltage | 110V AC |
| Wattage | 700 watts |
| Pot Capacity | 20 pounds of lead |
| Pot Interior | 4" x 4" |
| Pot Material | Carbon steel |
| Clearance Under Spout | 4 inches |
| Thermostat | Remote sensing, adjustable |
| Warranty | 2 years (manufacturer) |
The Production Pot IV's adjustable flow control valve is designed to pour sinkers up to two and three ounces quickly and without wrinkles. Smaller weights are easy to cast as well—the flow valve gives you the control to dial in your pour rate.
Due to the position of the pour spout underneath this furnace, it's not ideally suited for bottom-pouring spinner jig molds or other molds that require wires to protrude above the mold cavity. It works well with conventional sinker molds and other designs that don't require bottom pouring.
The Production Pot IV includes the melter, flow control valve, and adjustable mold guide. You'll need to supply your own sinker molds and casting tools to get started.
Yes—Lee Precision offers a 220-volt version of the Production Pot IV if your shop grows or you need higher-voltage operation in the future.
SKU: 121689011 • Width: 7.9in • Height: 7in • Depth: 10.9in • Weight: 3.6oz