Lee Precisiom115720165
Lee Precision 90029 Ingot Mold Silver Aluminum/Wood$21.08
Availability: In Stock
The Lee 92201 Ready to Cast Kit is a complete lead-casting setup for handloaders who want to make their own bullets. This 110-volt system bundles everything a beginner needs to get started: a Production Pot IV melter, lead ladle, mold mallet, and your choice of a free double-cavity bullet mold or ingot mold. If you're tired of buying factory bullets or want to customize loads for specific applications, casting lets you produce quality projectiles at a fraction of retail cost.
The Production Pot IV is the heart of the kit. It holds roughly 10 pounds of lead and reaches temperatures up to 900°F, with melt time under 20 minutes. The heating element uses only 500 watts during warm-up and significantly less to maintain temperature, making it efficient enough for regular shop use. The pot features front-mounted pour spout visibility so you can watch your metal flow, infinite heat control for precise temperature management, and a stable, wide base that prioritizes safety in the casting station. There's 4 inches of clearance under the spout—plenty of headroom for standard bullet molds and most sinker molds from any manufacturer.
The included lead ladle is sized right for bullet casting: it holds enough molten metal to keep the lead hot enough for consistent casting while reducing operator fatigue over a long session. The same ladle works for stirring alloy blends and skimming dross from the pot surface. The mold mallet is built from ash hardwood (the same wood used for baseball bats) and delivers the gentle tap needed to eject finished bullets cleanly from mold cavities without damaging them.
| Brand | Lee Precision |
| Model | 92201 |
| Voltage | 110 Volt (North American) |
| Pot Capacity | ~10 pounds lead |
| Maximum Temperature | 900°F |
| Melt Time | Less than 20 minutes |
| Power Consumption (Heat-up) | 500 watts |
| Spout Clearance | 4 inches |
| Mallet Material | Ash hardwood |
| Kit Contents | Production Pot IV, Lead Ladle, Mold Mallet, Choice of free mold (double-cavity bullet or ingot) |
The 4-inch clearance under the pour spout accommodates all standard bullet molds and most sinker molds regardless of brand. The kit includes your choice of a free Lee double-cavity bullet mold or ingot mold to get you started.
The pot reaches casting temperature in less than 20 minutes. Once up to temperature, it uses significantly less power to maintain heat, so you can run casting sessions without heavy electrical demand.
Yes. The Ready to Cast Kit includes all essential tools and equipment needed to start casting bullets immediately. The ladle is sized for comfort during extended casting, and the mallet is designed for safe, gentle bullet ejection from molds.
During the initial heat-up phase, the Production Pot IV draws 500 watts. Power consumption drops substantially once the lead reaches temperature and the melter enters maintenance mode.
SKU: 152743860 • Width: 8in • Height: 7.5in • Depth: 12.1in • Weight: 3.96oz
Availability: In Stock
The Lee 92201 Ready to Cast Kit is a complete lead-casting setup for handloaders who want to make their own bullets. This 110-volt system bundles everything a beginner needs to get started: a Production Pot IV melter, lead ladle, mold mallet, and your choice of a free double-cavity bullet mold or ingot mold. If you're tired of buying factory bullets or want to customize loads for specific applications, casting lets you produce quality projectiles at a fraction of retail cost.
The Production Pot IV is the heart of the kit. It holds roughly 10 pounds of lead and reaches temperatures up to 900°F, with melt time under 20 minutes. The heating element uses only 500 watts during warm-up and significantly less to maintain temperature, making it efficient enough for regular shop use. The pot features front-mounted pour spout visibility so you can watch your metal flow, infinite heat control for precise temperature management, and a stable, wide base that prioritizes safety in the casting station. There's 4 inches of clearance under the spout—plenty of headroom for standard bullet molds and most sinker molds from any manufacturer.
The included lead ladle is sized right for bullet casting: it holds enough molten metal to keep the lead hot enough for consistent casting while reducing operator fatigue over a long session. The same ladle works for stirring alloy blends and skimming dross from the pot surface. The mold mallet is built from ash hardwood (the same wood used for baseball bats) and delivers the gentle tap needed to eject finished bullets cleanly from mold cavities without damaging them.
| Brand | Lee Precision |
| Model | 92201 |
| Voltage | 110 Volt (North American) |
| Pot Capacity | ~10 pounds lead |
| Maximum Temperature | 900°F |
| Melt Time | Less than 20 minutes |
| Power Consumption (Heat-up) | 500 watts |
| Spout Clearance | 4 inches |
| Mallet Material | Ash hardwood |
| Kit Contents | Production Pot IV, Lead Ladle, Mold Mallet, Choice of free mold (double-cavity bullet or ingot) |
The 4-inch clearance under the pour spout accommodates all standard bullet molds and most sinker molds regardless of brand. The kit includes your choice of a free Lee double-cavity bullet mold or ingot mold to get you started.
The pot reaches casting temperature in less than 20 minutes. Once up to temperature, it uses significantly less power to maintain heat, so you can run casting sessions without heavy electrical demand.
Yes. The Ready to Cast Kit includes all essential tools and equipment needed to start casting bullets immediately. The ladle is sized for comfort during extended casting, and the mallet is designed for safe, gentle bullet ejection from molds.
During the initial heat-up phase, the Production Pot IV draws 500 watts. Power consumption drops substantially once the lead reaches temperature and the melter enters maintenance mode.
SKU: 152743860 • Width: 8in • Height: 7.5in • Depth: 12.1in • Weight: 3.96oz