Lee Precisiom115736413
Lee Precision 90021 Precision Melter 110 Volt Metal 2.23 lbs$51.59
Availability: In Stock
The Lee Production Pot IV is a 220-volt melter built for serious home bullet casters who need consistent, hands-on control over their lead supply. If you're casting in volume—whether you're loading for multiple calibers or just want the efficiency of casting your own—this melter moves through 10 pounds of lead in under 20 minutes and lets you dial in exact temperatures without the guesswork. The front-mounted pour spout puts you in command of every pour, and the design gives you a full 4 inches of clearance underneath to fit standard bullet molds and most sinker molds without fussing.
Power efficiency matters in a workshop. The Production Pot IV draws only 500 watts during initial heat-up and uses significantly less once it reaches temperature, keeping your electrical load reasonable even in a home reloading setup. The wide, stable base sits firmly on the bench, reducing the risk of accidents when you're focused on pouring. Infinite heat control means you're not locked into preset temperatures—you adjust it to match your exact casting needs, whether you're working with soft lead for pistol rounds or managing harder alloys for rifle bullets.
This is a workhorse melter for reloaders who've moved past small-batch casting. No gimmicks, no unnecessary features—just a capable pot that heats reliably, pours cleanly, and doesn't demand a dedicated 240-volt circuit that would strain a typical shop setup.
| Capacity | 10 pounds of lead |
| Voltage | 220 volts |
| Power Consumption (Heat-up) | 500 watts |
| Maximum Temperature | 900°F |
| Melt Time | Less than 20 minutes |
| Spout Clearance | 4 inches |
| Heat Control | Infinite (variable) |
The Lee Production Pot IV has 4 inches of clearance under the pour spout, which accommodates all standard bullet molds and most sinker molds. If you use specialty or oversized molds, measure your setup to confirm fit.
A full 10-pound pot melts in less than 20 minutes, making it practical for regular casting sessions without excessive downtime between pours.
Yes. It operates on 220-volt service, uses 500 watts during heat-up and less to maintain temperature, making it practical for most home workshops without overloading electrical circuits.
The Production Pot IV features infinite heat control, allowing you to adjust temperature continuously to match the specific lead composition and casting conditions you're working with.
SKU: 167524488 • Width: 7.8in • Height: 6.9in • Depth: 11in • Weight: 4oz
Availability: In Stock
The Lee Production Pot IV is a 220-volt melter built for serious home bullet casters who need consistent, hands-on control over their lead supply. If you're casting in volume—whether you're loading for multiple calibers or just want the efficiency of casting your own—this melter moves through 10 pounds of lead in under 20 minutes and lets you dial in exact temperatures without the guesswork. The front-mounted pour spout puts you in command of every pour, and the design gives you a full 4 inches of clearance underneath to fit standard bullet molds and most sinker molds without fussing.
Power efficiency matters in a workshop. The Production Pot IV draws only 500 watts during initial heat-up and uses significantly less once it reaches temperature, keeping your electrical load reasonable even in a home reloading setup. The wide, stable base sits firmly on the bench, reducing the risk of accidents when you're focused on pouring. Infinite heat control means you're not locked into preset temperatures—you adjust it to match your exact casting needs, whether you're working with soft lead for pistol rounds or managing harder alloys for rifle bullets.
This is a workhorse melter for reloaders who've moved past small-batch casting. No gimmicks, no unnecessary features—just a capable pot that heats reliably, pours cleanly, and doesn't demand a dedicated 240-volt circuit that would strain a typical shop setup.
| Capacity | 10 pounds of lead |
| Voltage | 220 volts |
| Power Consumption (Heat-up) | 500 watts |
| Maximum Temperature | 900°F |
| Melt Time | Less than 20 minutes |
| Spout Clearance | 4 inches |
| Heat Control | Infinite (variable) |
The Lee Production Pot IV has 4 inches of clearance under the pour spout, which accommodates all standard bullet molds and most sinker molds. If you use specialty or oversized molds, measure your setup to confirm fit.
A full 10-pound pot melts in less than 20 minutes, making it practical for regular casting sessions without excessive downtime between pours.
Yes. It operates on 220-volt service, uses 500 watts during heat-up and less to maintain temperature, making it practical for most home workshops without overloading electrical circuits.
The Production Pot IV features infinite heat control, allowing you to adjust temperature continuously to match the specific lead composition and casting conditions you're working with.
SKU: 167524488 • Width: 7.8in • Height: 6.9in • Depth: 11in • Weight: 4oz