L.E. Wilson167522851
L.E. Wilson Bushing Type Full Length Sizing Die 300 Prc$116.16
Availability: In Stock
The L.E. Wilson Bushing Type Full Length Sizing Die for 300 WSM gives precision reloaders a die that handles both neck sizing and body sizing in a single operation. Unlike standard full-length dies that resize the entire neck, this bushing-type die leaves approximately 3/16" at the bottom of the case neck unsized—a technique many accuracy-focused handloaders prefer because it reduces neck work and can improve consistency. If you're chasing tighter groups at the range or building ammo optimized for your specific rifle, this die lets you dial in exactly the neck tension you want while simultaneously sizing the shoulder and body.
Built from high-quality, heat-treated steel hardened to L.E. Wilson specifications—harder than Grade 8 bolts—this die is made to last through thousands of reloads. The included adjustable depth decapping rod and extra decapping punch give you full control over primer removal. It's compatible with standard 7/8"-14 reloading presses and features stainless steel components to resist corrosion. The precision-machined lock nut is engineered to L.E. Wilson standards for reliability session after session.
One thing to note: this die does not include a neck bushing, and it does not contain an expander. You'll need to source a bushing separately (L.E. Wilson bushings are the factory match, though Redding bushings will also fit). If you already have bushings or plan to match them to your rifle's chamber, you're ready to go. This is a die for reloaders who understand the details and want control over every aspect of case prep.
| Product | L.E. Wilson Bushing Type Full Length Sizing Die 300 WSM |
| Caliber | 300 WSM |
| Die Type | Full Length Bushing Sizing Die |
| Press Compatibility | Standard 7/8"-14 reloading press |
| Material | High-quality heat-treated steel |
| Hardness | Hardened to L.E. Wilson specifications (harder than Grade 8) |
| Neck Sizing Approach | Leaves approximately 3/16" at bottom of case neck unsized |
| Expander | Not included |
| Decapping | Adjustable depth decapping rod included; extra decapping punch included |
| Special Features | Stainless steel components; precision L.E. Wilson lock nut |
| Bushing | Not included; sold separately (L.E. Wilson or Redding compatible) |
The L.E. Wilson bushing-type die leaves approximately 3/16" of the case neck unsized at the bottom, rather than sizing the entire neck. This approach reduces unnecessary neck working and allows you to control neck tension independently by choosing your bushing size. Many handloaders find this results in better consistency and accuracy, especially for precision or competitive shooting.
Yes, neck bushings are sold separately. L.E. Wilson bushings are the factory-matched option, but Redding bushings are also compatible with this die. You'll need to select the bushing size that provides the neck tension appropriate for your rifle and ammunition.
The die includes an adjustable depth decapping rod and an extra decapping punch. The die itself does not include a neck bushing or expander—those are sourced separately based on your specific reloading needs.
This die is compatible with standard 7/8"-14 reloading presses, which covers the vast majority of single-stage and progressive presses on the market.
SKU: 167521939 • Width: 1.75in • Height: 1.75in • Depth: 5.75in • Weight: 0.6oz
Availability: In Stock
The L.E. Wilson Bushing Type Full Length Sizing Die for 300 WSM gives precision reloaders a die that handles both neck sizing and body sizing in a single operation. Unlike standard full-length dies that resize the entire neck, this bushing-type die leaves approximately 3/16" at the bottom of the case neck unsized—a technique many accuracy-focused handloaders prefer because it reduces neck work and can improve consistency. If you're chasing tighter groups at the range or building ammo optimized for your specific rifle, this die lets you dial in exactly the neck tension you want while simultaneously sizing the shoulder and body.
Built from high-quality, heat-treated steel hardened to L.E. Wilson specifications—harder than Grade 8 bolts—this die is made to last through thousands of reloads. The included adjustable depth decapping rod and extra decapping punch give you full control over primer removal. It's compatible with standard 7/8"-14 reloading presses and features stainless steel components to resist corrosion. The precision-machined lock nut is engineered to L.E. Wilson standards for reliability session after session.
One thing to note: this die does not include a neck bushing, and it does not contain an expander. You'll need to source a bushing separately (L.E. Wilson bushings are the factory match, though Redding bushings will also fit). If you already have bushings or plan to match them to your rifle's chamber, you're ready to go. This is a die for reloaders who understand the details and want control over every aspect of case prep.
| Product | L.E. Wilson Bushing Type Full Length Sizing Die 300 WSM |
| Caliber | 300 WSM |
| Die Type | Full Length Bushing Sizing Die |
| Press Compatibility | Standard 7/8"-14 reloading press |
| Material | High-quality heat-treated steel |
| Hardness | Hardened to L.E. Wilson specifications (harder than Grade 8) |
| Neck Sizing Approach | Leaves approximately 3/16" at bottom of case neck unsized |
| Expander | Not included |
| Decapping | Adjustable depth decapping rod included; extra decapping punch included |
| Special Features | Stainless steel components; precision L.E. Wilson lock nut |
| Bushing | Not included; sold separately (L.E. Wilson or Redding compatible) |
The L.E. Wilson bushing-type die leaves approximately 3/16" of the case neck unsized at the bottom, rather than sizing the entire neck. This approach reduces unnecessary neck working and allows you to control neck tension independently by choosing your bushing size. Many handloaders find this results in better consistency and accuracy, especially for precision or competitive shooting.
Yes, neck bushings are sold separately. L.E. Wilson bushings are the factory-matched option, but Redding bushings are also compatible with this die. You'll need to select the bushing size that provides the neck tension appropriate for your rifle and ammunition.
The die includes an adjustable depth decapping rod and an extra decapping punch. The die itself does not include a neck bushing or expander—those are sourced separately based on your specific reloading needs.
This die is compatible with standard 7/8"-14 reloading presses, which covers the vast majority of single-stage and progressive presses on the market.
SKU: 167521939 • Width: 1.75in • Height: 1.75in • Depth: 5.75in • Weight: 0.6oz