L.E. Wilson167524624
L.E. Wilson Bushing Type Full Length Sizing Die 6.5 Prc$116.16
Availability: In Stock
The L.E. Wilson Bushing Type Full Length Sizing Die for 300 PRC gives reloaders precise control over neck tension while sizing the case body in a single stroke. If you're chasing accuracy with your 300 PRC handloads, this die lets you dial in exactly how much crush you want on the bullet, a level of control that neck-sizing-only dies and standard full-length dies simply don't offer. The bushing system works with interchangeable neck bushings (sold separately) so you can fine-tune fit to your brass and bullets without buying multiple dies.
Wilson's design leaves the bottom 3/16" of the case neck unsized—a practice many precision shooters prefer because it reduces case work and can improve consistency and accuracy. The die includes an adjustable depth decapping rod with an extra decapping punch, so you're set to start processing brass right away. Built from hardened steel to L.E. Wilson's exacting specs (harder than Grade 8), the die is made to last through thousands of rounds. Stainless components resist corrosion, and the included lock nut (a genuine Wilson part, not an afterthought) ensures your settings stay put between reloads.
This die fits standard 7/8"-14 reloading presses and handles full-length sizing of both the shoulder and body. It works with L.E. Wilson neck bushings, and Redding bushings will also fit if you already have a set. Because it's a bushing die without a built-in expander, you maintain total control over neck diameter and tension—exactly what competitive shooters and handloaders chasing sub-MOA groups demand.
| Cartridge | 300 PRC |
| Type | Full Length Bushing Sizing Die |
| Thread | 7/8"-14 (standard press fit) |
| Material | Hardened steel (L.E. Wilson specification) |
| Expander | None (bushing system) |
| Neck Leave Unsized | 3/16" at bottom of case neck |
| Compatible Bushings | L.E. Wilson and Redding interchangeable bushings (sold separately) |
| Includes | Die, adjustable decapping rod, extra decapping punch, L.E. Wilson lock nut |
| Lock Nut Height | 0.270" |
| Lock Nut OD | 1.250" |
| Lock Nut Thickness | 0.225" (inside to outer edge) |
The die accepts L.E. Wilson neck bushings as the primary choice, and Redding interchangeable bushings will also fit. Bushings are sold separately, allowing you to dial in your exact neck tension by swapping them as needed.
The die comes with an adjustable decapping rod and an extra decapping punch, so you can begin full-length sizing and depriming right away. You will need to purchase a neck bushing separately to complete your setup. You'll also need brass, bullets, powder, and primers—standard reloading components.
L.E. Wilson designed this die to leave the bottom 3/16" of the case neck unsized. Many precision shooters prefer this approach because it reduces unnecessary case work, can improve consistency between rounds, and may contribute to better accuracy and longer case life.
Yes, if your press uses a standard 7/8"-14 threaded die hole, this die will fit. This is the universal size for most single-stage, progressive, and turret presses used in North America.
SKU: 167522851 • Width: 1.75in • Height: 1.75in • Depth: 5.75in • Weight: 0.7oz
Availability: In Stock
The L.E. Wilson Bushing Type Full Length Sizing Die for 300 PRC gives reloaders precise control over neck tension while sizing the case body in a single stroke. If you're chasing accuracy with your 300 PRC handloads, this die lets you dial in exactly how much crush you want on the bullet, a level of control that neck-sizing-only dies and standard full-length dies simply don't offer. The bushing system works with interchangeable neck bushings (sold separately) so you can fine-tune fit to your brass and bullets without buying multiple dies.
Wilson's design leaves the bottom 3/16" of the case neck unsized—a practice many precision shooters prefer because it reduces case work and can improve consistency and accuracy. The die includes an adjustable depth decapping rod with an extra decapping punch, so you're set to start processing brass right away. Built from hardened steel to L.E. Wilson's exacting specs (harder than Grade 8), the die is made to last through thousands of rounds. Stainless components resist corrosion, and the included lock nut (a genuine Wilson part, not an afterthought) ensures your settings stay put between reloads.
This die fits standard 7/8"-14 reloading presses and handles full-length sizing of both the shoulder and body. It works with L.E. Wilson neck bushings, and Redding bushings will also fit if you already have a set. Because it's a bushing die without a built-in expander, you maintain total control over neck diameter and tension—exactly what competitive shooters and handloaders chasing sub-MOA groups demand.
| Cartridge | 300 PRC |
| Type | Full Length Bushing Sizing Die |
| Thread | 7/8"-14 (standard press fit) |
| Material | Hardened steel (L.E. Wilson specification) |
| Expander | None (bushing system) |
| Neck Leave Unsized | 3/16" at bottom of case neck |
| Compatible Bushings | L.E. Wilson and Redding interchangeable bushings (sold separately) |
| Includes | Die, adjustable decapping rod, extra decapping punch, L.E. Wilson lock nut |
| Lock Nut Height | 0.270" |
| Lock Nut OD | 1.250" |
| Lock Nut Thickness | 0.225" (inside to outer edge) |
The die accepts L.E. Wilson neck bushings as the primary choice, and Redding interchangeable bushings will also fit. Bushings are sold separately, allowing you to dial in your exact neck tension by swapping them as needed.
The die comes with an adjustable decapping rod and an extra decapping punch, so you can begin full-length sizing and depriming right away. You will need to purchase a neck bushing separately to complete your setup. You'll also need brass, bullets, powder, and primers—standard reloading components.
L.E. Wilson designed this die to leave the bottom 3/16" of the case neck unsized. Many precision shooters prefer this approach because it reduces unnecessary case work, can improve consistency between rounds, and may contribute to better accuracy and longer case life.
Yes, if your press uses a standard 7/8"-14 threaded die hole, this die will fit. This is the universal size for most single-stage, progressive, and turret presses used in North America.
SKU: 167522851 • Width: 1.75in • Height: 1.75in • Depth: 5.75in • Weight: 0.7oz