L.E. Wilson167525525
L.E. Wilson Bushing Type Full Length Sizing Die 6Mm Cm$116.16
Availability: In Stock
The L.E. Wilson Bushing Type Full Length Sizing Die for 6mm Dasher gives reloaders precise control over neck tension while sizing the case body in a single stroke. If you're building match-grade ammunition or just want to dial in your loads with accuracy, this die lets you choose your own neck tension instead of being locked into a one-size-fits-all approach. The bushing design leaves the bottom 3/16" of the neck unsized—a practice many precision shooters prefer because it can improve consistency and accuracy compared to sizing the entire neck.
Built from high-quality, hardened steel to L.E. Wilson specifications (harder than Grade 8 bolts), this die is made to last through thousands of rounds. The adjustable depth decapping rod and included decapping punch give you control over how you process fired brass. Because these dies don't contain an expander, you'll pair this with interchangeable neck bushings sold separately—L.E. Wilson bushings are the natural fit, though Redding bushings will also work if you already have them on hand. Everything threads into a standard 7/8" reloading press.
The stainless steel components resist corrosion, and the L.E. Wilson lock nut (.225" ID to OD, .270" height, 1.250" OD) is engineered for a secure, repeatable fit. Whether you're loading for a new 6mm Dasher build or upgrading from generic full-length dies, this is a serious tool for shooters who take their precision seriously.
| Caliber | 6mm Dasher |
| Type | Bushing Type Full Length Sizing Die |
| Press Compatibility | Standard 7/8" reloading press |
| Material | High-quality heat-treated steel (hardened to L.E. Wilson specs) |
| Decapping | Adjustable depth decapping rod; extra decapping punch included |
| Expander | None (uses interchangeable bushings) |
| Lock Nut Dimensions | 0.225" inside to outside diameter, 0.270" height, 1.250" OD |
L.E. Wilson neck bushings are the recommended choice and are sold separately. Redding bushings will also fit the die.
The die does not include a bushing. You'll need to purchase an interchangeable neck bushing separately to complete the setup.
This die fits any standard reloading press with a 7/8" die hole—single-stage, turret, and progressive presses all work.
Partial neck sizing is a practice many precision shooters prefer because it can improve ammunition consistency and accuracy compared to sizing the entire neck. You get the benefits of full-length sizing for the shoulder and case body while preserving some of the work-hardening in the upper neck.
SKU: 167521929 • Width: 1.75in • Height: 1.75in • Depth: 5.75in • Weight: 0.6oz
Availability: In Stock
The L.E. Wilson Bushing Type Full Length Sizing Die for 6mm Dasher gives reloaders precise control over neck tension while sizing the case body in a single stroke. If you're building match-grade ammunition or just want to dial in your loads with accuracy, this die lets you choose your own neck tension instead of being locked into a one-size-fits-all approach. The bushing design leaves the bottom 3/16" of the neck unsized—a practice many precision shooters prefer because it can improve consistency and accuracy compared to sizing the entire neck.
Built from high-quality, hardened steel to L.E. Wilson specifications (harder than Grade 8 bolts), this die is made to last through thousands of rounds. The adjustable depth decapping rod and included decapping punch give you control over how you process fired brass. Because these dies don't contain an expander, you'll pair this with interchangeable neck bushings sold separately—L.E. Wilson bushings are the natural fit, though Redding bushings will also work if you already have them on hand. Everything threads into a standard 7/8" reloading press.
The stainless steel components resist corrosion, and the L.E. Wilson lock nut (.225" ID to OD, .270" height, 1.250" OD) is engineered for a secure, repeatable fit. Whether you're loading for a new 6mm Dasher build or upgrading from generic full-length dies, this is a serious tool for shooters who take their precision seriously.
| Caliber | 6mm Dasher |
| Type | Bushing Type Full Length Sizing Die |
| Press Compatibility | Standard 7/8" reloading press |
| Material | High-quality heat-treated steel (hardened to L.E. Wilson specs) |
| Decapping | Adjustable depth decapping rod; extra decapping punch included |
| Expander | None (uses interchangeable bushings) |
| Lock Nut Dimensions | 0.225" inside to outside diameter, 0.270" height, 1.250" OD |
L.E. Wilson neck bushings are the recommended choice and are sold separately. Redding bushings will also fit the die.
The die does not include a bushing. You'll need to purchase an interchangeable neck bushing separately to complete the setup.
This die fits any standard reloading press with a 7/8" die hole—single-stage, turret, and progressive presses all work.
Partial neck sizing is a practice many precision shooters prefer because it can improve ammunition consistency and accuracy compared to sizing the entire neck. You get the benefits of full-length sizing for the shoulder and case body while preserving some of the work-hardening in the upper neck.
SKU: 167521929 • Width: 1.75in • Height: 1.75in • Depth: 5.75in • Weight: 0.6oz