Kak Industry167515787
K-Spec M16 Bolt Carrier Group 5.56X45Mm Nato Full Chrome$219.99
Loading...
Loading...
Loading...
Availability: In Stock
Current Stock: Out of stock
The K-Spec M16 Bolt Carrier Group in 5.56×45 is KAK Industry's answer to shooters who want mil-spec performance with practical upgrades that actually improve reliability and shooter comfort. Built on a full M16 (full auto) carrier profile machined from 8620 steel and properly heat-treated, this BCG delivers the precision and durability you expect from a modern rifle platform—whether you're building a precision rifle, refreshing an existing upper, or running competition rounds downrange.
What sets the K-Spec apart is attention to detail without overengineering. The carrier features slotted angle rails (the "sand cutters" that help shed debris) and a dual ejector system for reliable round ejection in any condition. The proprietary Down Vent configuration redirects exhaust gas downward rather than back toward your face—a simple but effective design choice that makes shooting more pleasant, especially in a squad or during long range sessions. You get less gas in your sightline and a noticeably quieter experience without sacrificing performance.
Component selection reflects KAK's commitment to longevity. The single-piece billet-machined 4140 extractor is phosphate-coated for corrosion resistance. The 8740 chrome-plated firing pin is precision-ground and heat-treated. The gas key—machined from 4130 billet steel, chrome-lined and chrome-plated—is staked and Permatex-sealed to prevent the key-walking that has sidelined countless rifles. You also get a chrome-plated 4340 cam pin, an S7 tool steel ejector and extractor retaining pin, and Grade 8 T25 carrier key screws that are properly heat-treated. This is a BCG engineered to go the distance.
If you're swapping in a new bolt carrier group or building from a stripped upper, the K-Spec M16 gives you mil-spec dimensions and interface—meaning it'll work in any standard M16/M4-pattern AR without fitment surprises—but with the refinements that separate good rifles from reliable ones.
| Caliber | 5.56×45 NATO |
| Carrier Profile | M16 (Full Auto) |
| Carrier Material | 8620 Steel, heat-treated |
| Extractor Material | 4140 Billet Steel, phosphate-coated |
| Firing Pin Material | 8740 Chrome-plated |
| Gas Key Material | 4130 Billet Steel, chrome-lined and chrome-plated |
| Cam Pin Material | 4340 Chrome-plated |
| Ejector Pin Material | S7 Tool Steel |
| Carrier Key Screws | Grade 8, T25 drive, heat-treated |
| Special Features | Down Vent configuration, slotted angle carrier rails, dual ejector system |
Yes. The K-Spec M16 is built to mil-spec dimensions and uses a standard M16/M4-pattern interface, so it will function in any upper receiver designed for a mil-spec bolt carrier group.
Instead of venting gas rearward toward the shooter's face (as in standard designs), the Down Vent directs exhaust downward. This reduces gas blowback, lowers noise signature, and improves comfort during extended shooting or in squad-fire situations.
Yes. The gas key is precision staked to the carrier and sealed with Permatex to prevent movement or loosening over time.
This is a 5.56×45 NATO bolt carrier group. It is not compatible with other calibers.
SKU: 167516208 • Width: 1.5in • Height: 1.5in • Depth: 8in • Weight: 0.82oz
Availability: In Stock
Current Stock: Out of stock
The K-Spec M16 Bolt Carrier Group in 5.56×45 is KAK Industry's answer to shooters who want mil-spec performance with practical upgrades that actually improve reliability and shooter comfort. Built on a full M16 (full auto) carrier profile machined from 8620 steel and properly heat-treated, this BCG delivers the precision and durability you expect from a modern rifle platform—whether you're building a precision rifle, refreshing an existing upper, or running competition rounds downrange.
What sets the K-Spec apart is attention to detail without overengineering. The carrier features slotted angle rails (the "sand cutters" that help shed debris) and a dual ejector system for reliable round ejection in any condition. The proprietary Down Vent configuration redirects exhaust gas downward rather than back toward your face—a simple but effective design choice that makes shooting more pleasant, especially in a squad or during long range sessions. You get less gas in your sightline and a noticeably quieter experience without sacrificing performance.
Component selection reflects KAK's commitment to longevity. The single-piece billet-machined 4140 extractor is phosphate-coated for corrosion resistance. The 8740 chrome-plated firing pin is precision-ground and heat-treated. The gas key—machined from 4130 billet steel, chrome-lined and chrome-plated—is staked and Permatex-sealed to prevent the key-walking that has sidelined countless rifles. You also get a chrome-plated 4340 cam pin, an S7 tool steel ejector and extractor retaining pin, and Grade 8 T25 carrier key screws that are properly heat-treated. This is a BCG engineered to go the distance.
If you're swapping in a new bolt carrier group or building from a stripped upper, the K-Spec M16 gives you mil-spec dimensions and interface—meaning it'll work in any standard M16/M4-pattern AR without fitment surprises—but with the refinements that separate good rifles from reliable ones.
| Caliber | 5.56×45 NATO |
| Carrier Profile | M16 (Full Auto) |
| Carrier Material | 8620 Steel, heat-treated |
| Extractor Material | 4140 Billet Steel, phosphate-coated |
| Firing Pin Material | 8740 Chrome-plated |
| Gas Key Material | 4130 Billet Steel, chrome-lined and chrome-plated |
| Cam Pin Material | 4340 Chrome-plated |
| Ejector Pin Material | S7 Tool Steel |
| Carrier Key Screws | Grade 8, T25 drive, heat-treated |
| Special Features | Down Vent configuration, slotted angle carrier rails, dual ejector system |
Yes. The K-Spec M16 is built to mil-spec dimensions and uses a standard M16/M4-pattern interface, so it will function in any upper receiver designed for a mil-spec bolt carrier group.
Instead of venting gas rearward toward the shooter's face (as in standard designs), the Down Vent directs exhaust downward. This reduces gas blowback, lowers noise signature, and improves comfort during extended shooting or in squad-fire situations.
Yes. The gas key is precision staked to the carrier and sealed with Permatex to prevent movement or loosening over time.
This is a 5.56×45 NATO bolt carrier group. It is not compatible with other calibers.
SKU: 167516208 • Width: 1.5in • Height: 1.5in • Depth: 8in • Weight: 0.82oz