Kak Industry167514476
K-Spec M16 Bcg W/Side Vent 5.56X45Mm Nato Full Chrome$219.99
Availability: In Stock
The K-Spec M16 Bolt Carrier Group in 5.56 NATO with full chrome finish is KAK Industry's take on the modern mil-spec BCG — same dimensions and reliability you expect, with thoughtful upgrades that make a real difference downrange. Whether you're building a new upper or upgrading an existing rifle, this carrier delivers the durability and performance AR shooters depend on, wrapped in a full chrome package for enhanced corrosion resistance and easier cleaning.
What sets the K-Spec apart is attention to detail in the places that matter. The slotted angle carrier rails—often called "sand cutters"—help shed debris and fouling that builds up during sustained fire, keeping your BCG running smooth when it counts. The dual ejector system ensures reliable case ejection across a wide range of ammunition and shooting conditions. And if you've ever shot behind an AR with gas venting straight into your face, you'll appreciate KAK's Down Vent configuration, which redirects that flow downward instead. It's a small thing that makes the shooting experience noticeably quieter and less gassy.
The engineering runs deep: the carrier itself is machined from 8620 steel and heat-treated to spec. You get a single-piece billet 4140 extractor, 8740 chrome-plated firing pin that's precision ground and heat-treated, and an S7 tool steel ejector retaining pin. The gas key is 4130 billet steel, chrome-lined and chrome-plated, then precision staked and sealed with Permatex for zero gas leakage. Even the carrier key screws are Grade 8 with T25 drive, properly heat-treated. This is the kind of parts-level quality that pays off over thousands of rounds.
This is a full M16 (auto) profile carrier, so it's compatible with any mil-spec 5.56 NATO upper and lower. If you're a builder, an upgrader, or just someone who respects what goes into a reliable rifle, the K-Spec M16 BCG delivers mil-spec performance with real improvements.
| Caliber | 5.56 NATO |
| Carrier Profile | M16 (Full Auto) |
| Finish | Full Chrome |
| Carrier Material | 8620 Steel |
| Extractor Material | 4140 Steel (Billet) |
| Firing Pin Material | 8740 Steel (Chrome Plated) |
| Ejector Pin Material | S7 Tool Steel |
| Gas Key Material | 4130 Steel (Billet, Chrome-Lined and Chrome-Plated) |
| Gas Key Sealing | Precision Staked and Permatex Sealed |
| Carrier Key Screws | Grade 8, T25 Drive |
The K-Spec M16 BCG is a mil-spec profile carrier, so it will work with any standard mil-spec 5.56 NATO upper and lower receiver.
This is a full-auto (M16) profile carrier. The main difference is carrier geometry; an M16 profile carrier will function in both semi-auto and full-auto lowers, making it the universal mil-spec choice for AR builds.
Full chrome plating on the bolt carrier group provides superior corrosion resistance compared to phosphate coating, especially in humid or wet environments. It also makes the BCG easier to clean and maintain—fouling and carbon don't stick as readily to the smooth chrome surface.
The K-Spec M16 BCG includes the carrier, bolt, firing pin, extractor, ejector, cam pin (4340 chrome plated), retaining pins, gas key, and carrier key screws. You get a complete, ready-to-install bolt carrier group.
SKU: 167515787 • Width: 1.5in • Height: 1.5in • Depth: 8.25in • Weight: 0.82oz
Availability: In Stock
The K-Spec M16 Bolt Carrier Group in 5.56 NATO with full chrome finish is KAK Industry's take on the modern mil-spec BCG — same dimensions and reliability you expect, with thoughtful upgrades that make a real difference downrange. Whether you're building a new upper or upgrading an existing rifle, this carrier delivers the durability and performance AR shooters depend on, wrapped in a full chrome package for enhanced corrosion resistance and easier cleaning.
What sets the K-Spec apart is attention to detail in the places that matter. The slotted angle carrier rails—often called "sand cutters"—help shed debris and fouling that builds up during sustained fire, keeping your BCG running smooth when it counts. The dual ejector system ensures reliable case ejection across a wide range of ammunition and shooting conditions. And if you've ever shot behind an AR with gas venting straight into your face, you'll appreciate KAK's Down Vent configuration, which redirects that flow downward instead. It's a small thing that makes the shooting experience noticeably quieter and less gassy.
The engineering runs deep: the carrier itself is machined from 8620 steel and heat-treated to spec. You get a single-piece billet 4140 extractor, 8740 chrome-plated firing pin that's precision ground and heat-treated, and an S7 tool steel ejector retaining pin. The gas key is 4130 billet steel, chrome-lined and chrome-plated, then precision staked and sealed with Permatex for zero gas leakage. Even the carrier key screws are Grade 8 with T25 drive, properly heat-treated. This is the kind of parts-level quality that pays off over thousands of rounds.
This is a full M16 (auto) profile carrier, so it's compatible with any mil-spec 5.56 NATO upper and lower. If you're a builder, an upgrader, or just someone who respects what goes into a reliable rifle, the K-Spec M16 BCG delivers mil-spec performance with real improvements.
| Caliber | 5.56 NATO |
| Carrier Profile | M16 (Full Auto) |
| Finish | Full Chrome |
| Carrier Material | 8620 Steel |
| Extractor Material | 4140 Steel (Billet) |
| Firing Pin Material | 8740 Steel (Chrome Plated) |
| Ejector Pin Material | S7 Tool Steel |
| Gas Key Material | 4130 Steel (Billet, Chrome-Lined and Chrome-Plated) |
| Gas Key Sealing | Precision Staked and Permatex Sealed |
| Carrier Key Screws | Grade 8, T25 Drive |
The K-Spec M16 BCG is a mil-spec profile carrier, so it will work with any standard mil-spec 5.56 NATO upper and lower receiver.
This is a full-auto (M16) profile carrier. The main difference is carrier geometry; an M16 profile carrier will function in both semi-auto and full-auto lowers, making it the universal mil-spec choice for AR builds.
Full chrome plating on the bolt carrier group provides superior corrosion resistance compared to phosphate coating, especially in humid or wet environments. It also makes the BCG easier to clean and maintain—fouling and carbon don't stick as readily to the smooth chrome surface.
The K-Spec M16 BCG includes the carrier, bolt, firing pin, extractor, ejector, cam pin (4340 chrome plated), retaining pins, gas key, and carrier key screws. You get a complete, ready-to-install bolt carrier group.
SKU: 167515787 • Width: 1.5in • Height: 1.5in • Depth: 8.25in • Weight: 0.82oz